Took mine off because both sides were lifting tapes being visible and gaps are horrendous. I still want to re install because I really like the look but I want to know what is the best adhesive for it to keep in flush on both side or any tips for proper fit and adhesion. Thanks fellow vb owners!👊🏾🍻
@RichWithTechАй бұрын
I found at least 3 flaws with GoPro battery door, uploaded it yesterday. The problem persists with 9,10,11 and 12. There is a reason it leaks, or at least 3 and they are due to poor design of the seal on the battery door!
@lechkenassh9008Ай бұрын
what I pushed with forward range off road through ice wait 14 inches without 4x4 till later down on in the snow. and snow only 24 inches. and It did better than I thought. I just wish they had high and low on it !!! the battery bracket usually ground it out. in the area I live !!! before 800km on it it sucked after that I went from 5600 rpm to 8000 now and from 50km/h to 80 km/h now. I wonder what km/h when the rest unlocks automatically to 10k rpm next !!! mine was bought from new 0.4 km on my clock new !!! same with my 250cc strike new at 180 km/h that can keep up so far !!!
@christophermccord3757Ай бұрын
Every material has some amount of shrink and expansion when exposed to cold and heat which is why no car has perfect body gaps if it did then as soon as as it warmed up doors and hoods would not open they'd be sealed there has to be a happy medium with taped on parts the glue is softer when heated to becomes pliable and stretches so bolt on with tape and a seal and letting cure in proper temperature with weight on it will often prevent most of these issues not all but most
@danieljames3772 ай бұрын
"Lame" Simcoe?
@XiaoxiaoYuyu-ug3gy3 ай бұрын
I have both device,this is a bs video
@nyrainman48973 ай бұрын
Due for my first oil change and there is controversy on whether or not to use conventional or full synthetic oil. The manual doesn't specify which and someone mentioned to me that full synthetic oil can cause clutch slippage. Any recommendations?
@SerchGarzaOficial4 ай бұрын
Hello, I greet you from Mexico and I have the same problem as many here, my Hero 5 does not work telemetry, the GPS icon is on on my camera, but when recording video, Windows Quick App tells me that I have to activate first and I don't understand why this happens to me, I use the "Telemetry Extractor" software and I realize that the video was recorded with Telemetry data and everything is fine, but when trying to do it with the original GoPro software It doesn't work for me. I am very disappointed in the brand, I have been a user of these cameras for more than 15 years and now I will look for another better option, perhaps the Garmin Virb can help me.
@scottgarriott38846 ай бұрын
Not sure if it's the same issue, but I just flew my mini3 Pro for about 6 flawless flights at -12C, then brought it home and flew it around my house and the 3rd flight suddenly gave me "gimbal motor overload" errors and there was a whole lot of jerking and jiggling (not quite what I'd call jello effect). Strange that I'd get this after flying a lot in cold weather under the same pre-flight and flight conditions and with no errors or jiggly footage.
@laylahingram8386 ай бұрын
love this tutorial ... but the safety, how did you remove ?? does it just pop off ?? happy new year 🎉🎉🎉
@davidzdrenghea80847 ай бұрын
Mine has it to but is smaller is a diference is about 1mm
@BillyBobTup7 ай бұрын
Great review!
@romiagua27468 ай бұрын
Super 🏆
@daviddugan60468 ай бұрын
😊
@10thmountainvet9 ай бұрын
Get a framed Alice pack, use kitty litter for weight.
@riyadijoko98979 ай бұрын
bro next spring 18 kg
@SubySlider1711 ай бұрын
Interested to see how this progress and if they are going to redesign. I got me one and about to install. Thinking of adding tape all throughout that corner. Seeing this now with temperature changes, might stack some tape too for about 4" or so (maybe...). Hoping these will help out, especially with colder temps coming up. Good job on noting this issue and sharing! Wondering if a liquid adhesive install would eliminate this issue, and if so which would be the best one.
@SubySlider1710 ай бұрын
So I just installed mine today and I put 4 extra strips wide (3M tape) on the corners to make sure it sticks. I noticed with a dry fit it doesn't appear to fit flush 100%, it has some rocker between corners to middle-back near the emblem. I was extremely tedious with trying dry fit and getting best flush fit and it just doesn't fit perfectly, in my opinion it is a design flaw. I ended up stacking 3 pieces of 3M tape on the middle-back near the emblem to try to fill the gap to keep the corners sticking down and flush. I also opted not to install the bolts as that would amplify the issue. With this not fitting 100% flush, plus temperature changes when forcing pieces down it definitely will pop up with hot days and cold nights. If I would install again, for 3M tape I would stack 4 strips on the middle-back OR what I will probably re-do is install with a liquid adhesive (like Betalink or 3M Urethane Windshield Adhesive). Also heard many people with other spoilers fill gaps with 3M Windshield Adhesive. Just posting this if it helps anyone else out with fitment issues.
@nyrainman489711 ай бұрын
Not sure how yours drives, but I have a 2021 UT400 and it seems to me that I have to give it a bit more gas then needed to get it to start moving and when it does, it seems to be holding back until it starts off. Then when it does, it's a little jerky, then when it starts moving along, it seems to ride better. I have nothing to compare this with to to see whether or not this is normal. Any recommendations?
@kuyaariel11 ай бұрын
I installed mine and the 3m tape is visible. Do you see it?
@krisd63611 ай бұрын
I installed three times using three different brand adhesives with primer. Last two times I didn’t line up the holes n use the screws. To give it the flattest fit possible. The tabs lifted. I took it off. Very frustrating.
@americansoldier777611 ай бұрын
I can tell you from experience, if you don’t let the engine run and warm up and if you turn it on and drive it for a short distance and turn it off. When you check your oil, it will look like there’s water in the oil. I can guarantee it. Do what the manual says and definitely let it warm up and run for a while every single time you run it.
@hotdogandahayride9823 Жыл бұрын
GPS and telemetery not working right? Of course, this is the GoPro experience! The Hero 7 Black can't even reliably shut off, so I pull the battery after every video. When it's time to shoot another video I re-install the battery and turn it on to let it sniff for satellites and eventually I get the location icon. Yay, time to record! But the yay turns to wtf when reviewing the videos in Quik as it becomes painfully obvious the GPS and telemetry data work for a short time but soon become frozen or completely disconnected from what's really happening. I'd love to hear GoPro's excuse for this steaming hot failure. My free GPS phone apps never suck at this level.
@johnwalbridge2430 Жыл бұрын
Mine just got to 150 miles. I can get 45 mph out of it after a careful break in. Thanks for the clunk tip.
@rafaeloliveira7538 Жыл бұрын
Procurei aqui no Brasil e só encontrei teste com essa pulseira feito na piscina... Acredito que isso realmente deve funcionar e salvar vidas. Obrigado 😉🇧🇷
@roberttolbert3535 Жыл бұрын
Bought an $8K rig and did $10K damage to his yard.
@billydunn2139 Жыл бұрын
Interesting
@backwoodsbully9841 Жыл бұрын
A beefed-up golf cart for $10,00 Thats all I need. I don't need A $25,000+ Polaris or Cam-am
@10469 Жыл бұрын
I WANT ONE ☝️!!
@OutdoorTonez Жыл бұрын
Put the seat belt behind your back just clip it together right. Don’t need the belt
@MarcusBlaze092 Жыл бұрын
I use this process and the GPS speed reading is incorrect. I was driving at 45mph and the telemetrics was showing 70mph. I am losing patience with this device
@kowioutdoortv Жыл бұрын
Really? Quick recording does not turn on GPS ? I have to check it, if this the case, then it is another "feature" that is disqualifying this camera 🤔🤨
@thomaspondysh957 Жыл бұрын
Why is one front wheels turned different than the other? Out of alignment?
@elaineinmaine7971 Жыл бұрын
Tractor Supply sales them in America the one I got was missing the right side tailgate latch so yes thus far I haven't been able to drop open the tailgate also it looks as if yours has different tires than mine the one Tractor Supply sales has WANDA brand tires that are 25x8.00-12 Tires
@HawaiiSustainable Жыл бұрын
Ours also seem to be missing a tailgate latch
@elaineinmaine7971 Жыл бұрын
Has anyone done a motor swap to a bigger motor just yet? On one of these Hisun 400's
@CactusJackPR Жыл бұрын
Is there anyway you can disable the seatbelt feature?
@carygn812 Жыл бұрын
I have a 2021 Hisun HS400 we purchased from a Hisun dealer in Hayden, Idaho and it is exactly like this Coleman UT400 feature for feature. Only difference is, ours is camo green. Not a toy. We've been using it on our farm and for hunting. Love the smaller size to get around most places where our 4-wheeler ATV could go... and the smaller price. I've had mine up to 50 mph. Well made, good quality!
@tristandavies1056 Жыл бұрын
gps is turned on but isnt lit up on the prefrence page but it doesnt have the line through it help meee PLEASE
@mikep3322 Жыл бұрын
How much for an ounce lmao
@convk Жыл бұрын
how much is the fuel consumption
@Citizenoflite Жыл бұрын
Great video. What sparkplug did you suggest and what is the gap????
@ocd7036 Жыл бұрын
Think it would plow snow ?
@Smoke-uo1sz Жыл бұрын
How do u switch from 4x4 to 2 wheel drive I try to switch it and now it make a noise
@Smoke-uo1sz Жыл бұрын
Mine make a loud noise like if the breaks are on but there not
@trapdoor04 Жыл бұрын
I have this dash cam and it cuts up recordings into 30s to 2m, I can’t seem to find a setting to change this (I do not want it to cut up recordings). Any help?
@airhanet10 ай бұрын
use good quality class 10 sdcad 64gb
@blackberrybunny Жыл бұрын
Did you say a 'grease sert'? I'm sorry for being ignorant--I'm a 54 year old woman who has been legally blind her whole life, and I've never been able to drive. I just bought one of these so I can get around my 5 acres. I have enough eyesight to drive it safely on our flat land. I really needed that dump bed for tree limbs and yard trash. I'm also recovering from Achilles Tendon/heel bone removal surgery, a long 1.5 year recovery, still dealing with pain and swelling and I have a huge yard to take care of. Hopefully this UTV is going to make my life a lot easier! I came here on YT to find videos about this model, so learn how to do maintenance. I'm not sure what a grease sert is? How do I find them? My UTV was bought new, already assembled at Tractor Supply. I got the Black Friday deal, $2,000 off. Seems to be running well, but it has less than 4 miles on it, and it just came today, so I'm learning how to use it. Any advice is appreciated! I'm really excited to finally be able to drive something around for the first time. I learned quite a few things from you, so thank you so much for this video! I'm off to give it a go now!
@willss6027 Жыл бұрын
Grease zerks are little fittings with a ball and spring seal you use a grease gun on to fill. They warned that often they haven't been greased when delivered so I would promptly get it done. They will be on the U-joints of the drivelines and often on other suspension joints. Perhaps the manual shows all the zerks. A flexible hose grease gun is usually needed.
@TheGlennFamily Жыл бұрын
Thank you for the video.
@user-sl4ul4nc3t Жыл бұрын
My biggest issue with coleman brand atvs is their refusal to stand. Ehind their warranties and products. And their warranties are terrible compared to other brands.
@aloeisthestuff9622 Жыл бұрын
Just had to replace my Samsung phone and AUTEL SKY app is now INCOMPATIBLE !!! ?????
Пікірлер
Got mine for 4500. 8 hours. Fun's great
Took mine off because both sides were lifting tapes being visible and gaps are horrendous. I still want to re install because I really like the look but I want to know what is the best adhesive for it to keep in flush on both side or any tips for proper fit and adhesion. Thanks fellow vb owners!👊🏾🍻
I found at least 3 flaws with GoPro battery door, uploaded it yesterday. The problem persists with 9,10,11 and 12. There is a reason it leaks, or at least 3 and they are due to poor design of the seal on the battery door!
what I pushed with forward range off road through ice wait 14 inches without 4x4 till later down on in the snow. and snow only 24 inches. and It did better than I thought. I just wish they had high and low on it !!! the battery bracket usually ground it out. in the area I live !!! before 800km on it it sucked after that I went from 5600 rpm to 8000 now and from 50km/h to 80 km/h now. I wonder what km/h when the rest unlocks automatically to 10k rpm next !!! mine was bought from new 0.4 km on my clock new !!! same with my 250cc strike new at 180 km/h that can keep up so far !!!
Every material has some amount of shrink and expansion when exposed to cold and heat which is why no car has perfect body gaps if it did then as soon as as it warmed up doors and hoods would not open they'd be sealed there has to be a happy medium with taped on parts the glue is softer when heated to becomes pliable and stretches so bolt on with tape and a seal and letting cure in proper temperature with weight on it will often prevent most of these issues not all but most
"Lame" Simcoe?
I have both device,this is a bs video
Due for my first oil change and there is controversy on whether or not to use conventional or full synthetic oil. The manual doesn't specify which and someone mentioned to me that full synthetic oil can cause clutch slippage. Any recommendations?
Hello, I greet you from Mexico and I have the same problem as many here, my Hero 5 does not work telemetry, the GPS icon is on on my camera, but when recording video, Windows Quick App tells me that I have to activate first and I don't understand why this happens to me, I use the "Telemetry Extractor" software and I realize that the video was recorded with Telemetry data and everything is fine, but when trying to do it with the original GoPro software It doesn't work for me. I am very disappointed in the brand, I have been a user of these cameras for more than 15 years and now I will look for another better option, perhaps the Garmin Virb can help me.
Not sure if it's the same issue, but I just flew my mini3 Pro for about 6 flawless flights at -12C, then brought it home and flew it around my house and the 3rd flight suddenly gave me "gimbal motor overload" errors and there was a whole lot of jerking and jiggling (not quite what I'd call jello effect). Strange that I'd get this after flying a lot in cold weather under the same pre-flight and flight conditions and with no errors or jiggly footage.
love this tutorial ... but the safety, how did you remove ?? does it just pop off ?? happy new year 🎉🎉🎉
Mine has it to but is smaller is a diference is about 1mm
Great review!
Super 🏆
😊
Get a framed Alice pack, use kitty litter for weight.
bro next spring 18 kg
Interested to see how this progress and if they are going to redesign. I got me one and about to install. Thinking of adding tape all throughout that corner. Seeing this now with temperature changes, might stack some tape too for about 4" or so (maybe...). Hoping these will help out, especially with colder temps coming up. Good job on noting this issue and sharing! Wondering if a liquid adhesive install would eliminate this issue, and if so which would be the best one.
So I just installed mine today and I put 4 extra strips wide (3M tape) on the corners to make sure it sticks. I noticed with a dry fit it doesn't appear to fit flush 100%, it has some rocker between corners to middle-back near the emblem. I was extremely tedious with trying dry fit and getting best flush fit and it just doesn't fit perfectly, in my opinion it is a design flaw. I ended up stacking 3 pieces of 3M tape on the middle-back near the emblem to try to fill the gap to keep the corners sticking down and flush. I also opted not to install the bolts as that would amplify the issue. With this not fitting 100% flush, plus temperature changes when forcing pieces down it definitely will pop up with hot days and cold nights. If I would install again, for 3M tape I would stack 4 strips on the middle-back OR what I will probably re-do is install with a liquid adhesive (like Betalink or 3M Urethane Windshield Adhesive). Also heard many people with other spoilers fill gaps with 3M Windshield Adhesive. Just posting this if it helps anyone else out with fitment issues.
Not sure how yours drives, but I have a 2021 UT400 and it seems to me that I have to give it a bit more gas then needed to get it to start moving and when it does, it seems to be holding back until it starts off. Then when it does, it's a little jerky, then when it starts moving along, it seems to ride better. I have nothing to compare this with to to see whether or not this is normal. Any recommendations?
I installed mine and the 3m tape is visible. Do you see it?
I installed three times using three different brand adhesives with primer. Last two times I didn’t line up the holes n use the screws. To give it the flattest fit possible. The tabs lifted. I took it off. Very frustrating.
I can tell you from experience, if you don’t let the engine run and warm up and if you turn it on and drive it for a short distance and turn it off. When you check your oil, it will look like there’s water in the oil. I can guarantee it. Do what the manual says and definitely let it warm up and run for a while every single time you run it.
GPS and telemetery not working right? Of course, this is the GoPro experience! The Hero 7 Black can't even reliably shut off, so I pull the battery after every video. When it's time to shoot another video I re-install the battery and turn it on to let it sniff for satellites and eventually I get the location icon. Yay, time to record! But the yay turns to wtf when reviewing the videos in Quik as it becomes painfully obvious the GPS and telemetry data work for a short time but soon become frozen or completely disconnected from what's really happening. I'd love to hear GoPro's excuse for this steaming hot failure. My free GPS phone apps never suck at this level.
Mine just got to 150 miles. I can get 45 mph out of it after a careful break in. Thanks for the clunk tip.
Procurei aqui no Brasil e só encontrei teste com essa pulseira feito na piscina... Acredito que isso realmente deve funcionar e salvar vidas. Obrigado 😉🇧🇷
Bought an $8K rig and did $10K damage to his yard.
Interesting
A beefed-up golf cart for $10,00 Thats all I need. I don't need A $25,000+ Polaris or Cam-am
I WANT ONE ☝️!!
Put the seat belt behind your back just clip it together right. Don’t need the belt
I use this process and the GPS speed reading is incorrect. I was driving at 45mph and the telemetrics was showing 70mph. I am losing patience with this device
Really? Quick recording does not turn on GPS ? I have to check it, if this the case, then it is another "feature" that is disqualifying this camera 🤔🤨
Why is one front wheels turned different than the other? Out of alignment?
Tractor Supply sales them in America the one I got was missing the right side tailgate latch so yes thus far I haven't been able to drop open the tailgate also it looks as if yours has different tires than mine the one Tractor Supply sales has WANDA brand tires that are 25x8.00-12 Tires
Ours also seem to be missing a tailgate latch
Has anyone done a motor swap to a bigger motor just yet? On one of these Hisun 400's
Is there anyway you can disable the seatbelt feature?
I have a 2021 Hisun HS400 we purchased from a Hisun dealer in Hayden, Idaho and it is exactly like this Coleman UT400 feature for feature. Only difference is, ours is camo green. Not a toy. We've been using it on our farm and for hunting. Love the smaller size to get around most places where our 4-wheeler ATV could go... and the smaller price. I've had mine up to 50 mph. Well made, good quality!
gps is turned on but isnt lit up on the prefrence page but it doesnt have the line through it help meee PLEASE
How much for an ounce lmao
how much is the fuel consumption
Great video. What sparkplug did you suggest and what is the gap????
Think it would plow snow ?
How do u switch from 4x4 to 2 wheel drive I try to switch it and now it make a noise
Mine make a loud noise like if the breaks are on but there not
I have this dash cam and it cuts up recordings into 30s to 2m, I can’t seem to find a setting to change this (I do not want it to cut up recordings). Any help?
use good quality class 10 sdcad 64gb
Did you say a 'grease sert'? I'm sorry for being ignorant--I'm a 54 year old woman who has been legally blind her whole life, and I've never been able to drive. I just bought one of these so I can get around my 5 acres. I have enough eyesight to drive it safely on our flat land. I really needed that dump bed for tree limbs and yard trash. I'm also recovering from Achilles Tendon/heel bone removal surgery, a long 1.5 year recovery, still dealing with pain and swelling and I have a huge yard to take care of. Hopefully this UTV is going to make my life a lot easier! I came here on YT to find videos about this model, so learn how to do maintenance. I'm not sure what a grease sert is? How do I find them? My UTV was bought new, already assembled at Tractor Supply. I got the Black Friday deal, $2,000 off. Seems to be running well, but it has less than 4 miles on it, and it just came today, so I'm learning how to use it. Any advice is appreciated! I'm really excited to finally be able to drive something around for the first time. I learned quite a few things from you, so thank you so much for this video! I'm off to give it a go now!
Grease zerks are little fittings with a ball and spring seal you use a grease gun on to fill. They warned that often they haven't been greased when delivered so I would promptly get it done. They will be on the U-joints of the drivelines and often on other suspension joints. Perhaps the manual shows all the zerks. A flexible hose grease gun is usually needed.
Thank you for the video.
My biggest issue with coleman brand atvs is their refusal to stand. Ehind their warranties and products. And their warranties are terrible compared to other brands.
Just had to replace my Samsung phone and AUTEL SKY app is now INCOMPATIBLE !!! ?????
Mine leaked