I've got the same. Yesterday after new update 003 and it was totally stable!! So maybe the firmware 1.0.300 optimized the gimbal stablity when temperature below zero, even dji release note do not refer info for opitmizing gimbal stable ability. You can update the firmware of your drone. May the info can help you.

I just came back home, i was so happy to check out the footage ... It's horrible, the shakes, unusable. I'm happy that i'm not the only one. Thank you for uploading this.

@vince1271

4 жыл бұрын

Is there a way that i could show you how horrible my footage is ? lol

@cantechvideos5701

4 жыл бұрын

@@vince1271 upload it to your channel I will take a look, did your video start out smooth and progressively get worse?

@vince1271

4 жыл бұрын

@@cantechvideos5701 I uploaded the video. I'm not sure if it started smooth. All my footage is shaking like that.

@cantechvideos5701

4 жыл бұрын

@@vince1271 was your drone cold when you launched it or was it still warm from your house?

@cantechvideos5701

4 жыл бұрын

kzread.info/dash/bejne/jIpso9Rrd7uzndY.html

So I just bought this drone yesterday and the camera shakes really bad. I’m in Alabama and it’s like 65-70 degrees here. Have you found a fix for this? Mine looks worse than yours. I will try to post a video in your comments of what mine looks like. If it will let me.

I had a similar problem with my mini 3 pro it happened after a crash into a small tree and a 15 foot fall. The jello in the video was caused by the rubber mounts on the gimbal had moved out of place and the airframe vibration were conducting to the gimbal . After a little adjustment problem fixed ,hope that helps.

I have the same issue, I think the temperature was around 0Celsius on the ground so I think it was way below 0 up in the air. The video started out great but after 20seconds it started shaking.

It’s the cold temperatures Mine did the same thing at 32 degrees when it warmed up to in the 40’s then it stopped

It was the music, it I had to listen to this music why I was flying I would shake too.

I have the same kind of vibration shown at 1:54. It seems very random. I mostly fly in P mode. Very few people report this. I asked DJI and let's see what they say. Funny how youtube testers did not find this pre-release given the high chance for this to happen. Maybe the release day firmware update caused it.

@cantechvideos5701

4 жыл бұрын

kzread.info/dash/bejne/jIpso9Rrd7uzndY.html

@TheMisterg34

4 жыл бұрын

It gets worse even with the new firmware, and i live in the Caribbean...check my channel

I've got the same. I hope it's a firmware issue. I can't be arsed to send it back to China.

You have a defective gimbal, please, contact with your SAT

Do not update firmware via WiFi,use DJI Assistant2 for Mavic and reinstal latest Firmware via USB Cable,belive me i have some issues and when i reinstal Firmware using DJI Assistant problem with range was solved and i dont have anny issues....And tri to recalibrate Gimbal,check the propelerels and inspect the gimbal from inside.

Im taking mine back today. Not worth the headache

What was the temperature?

@cantechvideos5701

4 жыл бұрын

First flight about -7 celsius, second flight -2 celsius (haven't uploaded this yet).

@maxkielbasa6079

4 жыл бұрын

@@cantechvideos5701 I have noticed all the shaky footage had coldness in common. There are many videos with the original mavic experiencing the same in cold weather.

@maxkielbasa6079

4 жыл бұрын

@@cantechvideos5701 DJI lists that the operating temperature range is ; Operating Temperature Range 0° to 40°C (32° to 104°F)

@cantechvideos5701

4 жыл бұрын

@@maxkielbasa6079 tomorrow will be +1 celsius will try again, a friend of mine flew his mavic mini in the same temperature today and had no shake. The only difference was his was cold from being in his car, I am suspecting it is the temperature changes that are affecting it (going from a warm house into a cold sky)

@maxkielbasa6079

4 жыл бұрын

@@cantechvideos5701 I hope you get it worked out. I wonder what the physics of the problem is. Like water condensing or freezing on the gimbal housing or brittle rubber or a defect. Good luck.

Flew today after new update 003 and it was totally stable!! Happy!!

@xingxingyi670

4 жыл бұрын

me too. When i updated the firmware to 1.0.300 and it was totally stable!! awsome!

Is still happens to me

@xamakitho90

3 жыл бұрын

me too :/

Mines doing it too!,!!!

@cantechvideos5701

4 жыл бұрын

Check out my other video for a solution

The cold wheater can damage your motors,and propeler's iff propelers cach the ice when flying in -2 or more celsius it can seryosli damage your drone and gimbal motors are so sensetive and tiny....I do not fly with my mini when is cold outside.

@cantechvideos5701

4 жыл бұрын

I live in Canada, unfortunately it's cold 6 months of the year! I have flown other drones in -20 no issue, the mavic mini is fine in the cold as long as it's climatized first

It's because it's freezing out where you are #DuuuhDuuuuh

I used a different sd card and it fixed it

@jelbarrios695

3 жыл бұрын

Daniel Taormina what sd card do you use?