Great repair. You sir are worth every penny and your customers are lucky to have you.

@NBSWELDING

19 күн бұрын

Thank you kindly...good to hear from ya...thanks for watching and commenting CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

that little torch table just impresses the hell out of me

@Froggies505

21 күн бұрын

also im young. i scarf everything, dont want to carbon arc off my bobcat. ill have to try that straight cut through. amy tips for the bigger gaps at the bottom of the gouge? half the time i try to key hole it wants to blow out on a bigger that 1/8" gap

@NBSWELDING

20 күн бұрын

I've used it in many videos CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

@jondavidmcnabb

20 күн бұрын

That is a really cool copy torch system isn't it!!!

Good repair job. Really liked the cutting table. Just and idea for you. Making a video on all the different cutting touch’s you have alone with and explanation of there use and the different tips. I’ve seen rosebud touch’s that are used to heat propellers hubs up to jump them onto the propeller shaft taper on towboats. And the same heating applied to remove them. They produce a huge amount of heat. You have a great deal of knowledge and there beginners out here who benefit from your sharing. Your videos contain lots of information that you probably don’t think a second thing about but to others it’s a world of knowledge. Thank you for sharing.

@NBSWELDING

20 күн бұрын

Thanks for watching and commenting CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

@jake-mv5oi

13 күн бұрын

Agreed.

Thanks CB, nice repair. You never know what you're going to get into .nice shots of your torch work. The flame probably helps to burn off all that oil. Keep up the great work.

@NBSWELDING

20 күн бұрын

Thanks 👍 CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

awesome repair. Always learning something when i watch your channel CB

@NBSWELDING

20 күн бұрын

Glad to hear it CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Wicked torch work Nice end result thank you for sharing Cheers from Nova Scotia

@NBSWELDING

20 күн бұрын

Thank you! Cheers! CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Nice job as usual CB, you sure do prove you don’t need all the fancy expensive equipment to do a quality repair. Maybe just a little resourcefulness. Have a good night

@NBSWELDING

20 күн бұрын

Thanks 👍 CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Better than new. Great job👍🇺🇸🇺🇸🇺🇸🇺🇸

@NBSWELDING

20 күн бұрын

Thank you CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Love that pattern torch thing it is cool as hell. We have worked on quite a few of those grapplers as well nice repair/reinforcement. My uncle in WV was telling me how hot it was this morning. We haven’t had a drop of rain in 3 weeks here in central NC. Been to a few logging jobs recently that made me real nervous as far as fire since it is so hot and dry. Stay cool and safe out there buddy.

@NBSWELDING

20 күн бұрын

Thanks...stay cool CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Thank you for speaking in a more relaxed voice, today. I enjoyed it and the video.

@NBSWELDING

20 күн бұрын

Glad you enjoyed it! CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

The wiper motor in my 1988 Chevy k1500 Silverado 4x4 didn’t have the circuit board in it so I just had to replace the whole motor but if there’s a circuit board in yours resoldering should fix it Tapping the break pedal at a 🛑 here is a California stop 😂

@NBSWELDING

20 күн бұрын

Gotcha...10-4 CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Hey C.B. D.P. here, you can repair the circuit board in your wiper motor very easily. I've done quit a few over the years. Your friend is correct the solder joints crack and cause the wipers to either not work or to work then stop work not park start up again , in other words your wiper motor gets a brain of it's own. There's only one wiring plug that you disconnect then there's 3 screw on the black plastic cover, remove those screws and the cover. Once you have the cover off there might be one more screw holding the board in. the board should lift out with no more wires attached inside the motor. on the back of the big black plastic plug you'll see 5 tabs coming through the board. Look at them closely for cracks. Once you locate the cracks, get out your carbon-arc and gouge out all the old solder. No,no,no just kidding, you can get out your soldering gun,torch or iron and reflow the solder. check for any other cracked solder joints and reflow the solder on them. Install the circuit board being careful not to bend the 2 contacts sticking up off of the black plastic plug on the board. install the screw if there is one, install the cover and the 3 screws plug the harness back in and you should be good to go. Hope this helps. Nice repair on the grapple, those things take a lot of abuse. I sent you an email.

@NBSWELDING

20 күн бұрын

Thank you for the information...appreciate the help on it CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Just when I thought I've seen everything, yo go and make a template with duct tape. Again proving use what you got that way you have everything you need. Nice job👌

@NBSWELDING

20 күн бұрын

You know it! CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Nice job👍

@NBSWELDING

20 күн бұрын

Thanks 👍 CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Great job; it ought to hold. I like arc gouging when available.....but also purchased gouging tips for my torch, for exactly the reasons you mentioned. It just increases versatility, & I don't have to have a big compressor on site to accomplish the same thing. Thanks for another great video!

@NBSWELDING

20 күн бұрын

Right on CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

That should do it!! Good job!

@NBSWELDING

11 күн бұрын

👍

Nice job! I appreciate the way you narrate and explain your logic in how/why you dooze it

@NBSWELDING

20 күн бұрын

Thanks CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Beautiful job CB. Love the explanation of the abbreviation of the stop sign.

@NBSWELDING

20 күн бұрын

Thank you kindly CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Awesome Job CB thanks for taking us along Always a lesson 👍😎💪💪💪

@NBSWELDING

20 күн бұрын

You bet CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

NIce repair that young man.

@NBSWELDING

20 күн бұрын

Thanks 👍 CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

nice result

@NBSWELDING

20 күн бұрын

Thanks CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Nice repair job as usual! 👍🏼💪🏼 I kept sitting here waiting for something to catch on fire and it didn’t. Whenever I work around stuff like that there’s always a fire lol.

@NBSWELDING

20 күн бұрын

Some bark caught fire on the ground and some grease flared up on the grapple but no big deal CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Great job, it sure is hot outside.

@NBSWELDING

20 күн бұрын

It sure is CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Great repair

@NBSWELDING

6 күн бұрын

👍

Great job cb, thanks for the video

@NBSWELDING

20 күн бұрын

You bet CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

I repair quite a few of these grapples every year and that’s the best repair you can do without disassembly. I’m fortunate enough to have them brought in to the shop where I can pressure wash and tear them down

@NBSWELDING

20 күн бұрын

I'd do more if they would take it apart CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

😎

@NBSWELDING

9 күн бұрын

Thank you 😊

Awesome video

@NBSWELDING

14 күн бұрын

👍

There's a lot going on, with this one.👍

@NBSWELDING

20 күн бұрын

Yep but we got it CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Awesome video thanks.

@NBSWELDING

19 күн бұрын

Glad you liked it! CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Also I saw the tags on the stack of logs wonder if that is like the woods yard here where people buy them for whiskey barrels on site there.

@NBSWELDING

20 күн бұрын

I don't think any of that goes for barrels...dunno CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Was definitely thinking that that pin on the broke side looked quite new...😕

@NBSWELDING

20 күн бұрын

Yep...brand new CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Great Job CB.....The NBS Welding Expert..............Why just repair, when you can make it 5 Times Stronger.........Always staying ahead of the Curve in a World of People over working their Equipment. They should be thankful you do what you do for them. Have a Great 4th of July.

@NBSWELDING

20 күн бұрын

You too thanks CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Good to go

@NBSWELDING

20 күн бұрын

Yep CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Another video to enjoy! Those plates look like they were factory installed.

@NBSWELDING

20 күн бұрын

Thank you CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Try running a wire from the body of the motor to the chassis ground. Worked on my 98

@NBSWELDING

20 күн бұрын

Thanks for the tip...I'll try that CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Love your videos and your repairs . Beautiful job done. Did you make that pattern table? Thanks CB!

@NBSWELDING

20 күн бұрын

In 1991 I built the base...watch this video that tells more about it kzread.info/dash/bejne/oqFsxNWiftjFeNY.htmlsi=LXk0T5lfxO56z6dv

Looks good to me.

@NBSWELDING

20 күн бұрын

Thanks CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

that was a lot of cracking on there

@NBSWELDING

19 күн бұрын

Sure was CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Wiper module just unscrews from wiper motor 3 screws get it from rock auto under $35

@NBSWELDING

20 күн бұрын

Thank you CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

@georgestrayer6922

19 күн бұрын

I used to work in a chevy dealership back in that era, we replaced lots of those modules. Like @acmemaching stated just three screws. If they strip the head just break the plastic module and get a pair of visegrips on the screw.

👍

@NBSWELDING

14 күн бұрын

👍

Man u lay a pretty weld down

@NBSWELDING

14 күн бұрын

👍

That aint going no where...👍

@NBSWELDING

20 күн бұрын

Right on CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Place an ice pack on the back of your phone or camera.

wiper control board is replacable under the cover of the motor I have done many of them

@NBSWELDING

20 күн бұрын

Thanks CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

Well CB , I am new to your channel I am. Impress by your talent and workship , man your are capable Quality of your video etc Question= i am having trouble to weld with 7018 rod You seems to have no trouble at all and so as other welders !!!! I. Cleaned my materials ,tried different amperage ( like you 125 amps ) lowerr amps high, dry rods, different brand etc I cannot get it going ?????? I am frustrated about it, i am a beginner welder , not trouble with mig,,,, What can you tell me about it ,if you have a little time to comment Thanks in advance wish to spend time one day beside a guy like you to get experience Very good job and hoe you approch it Serge ( from Mtl )

@NBSWELDING

20 күн бұрын

Practice and develop understanding of arc length...long arc makes a hotter puddle...short arc cools the puddle and increases control of arc direction Arc direction---arc direction is part of control--practice and develop the ability to direct the arc where heat is needed until that spot is hot then redirect arc to a cooler spot Weld will get hotter as you go...long arc length to start with then shorter arc as you proceed so it doesn't get too hot

@NBSWELDING

20 күн бұрын

CHECK OUT THIS GANG MOWER Help me out with a like, comment, & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

@sefaucon3839

20 күн бұрын

Thank you so much for advice , well welcome , i will try that

Looks like crackalation to me

@NBSWELDING

20 күн бұрын

Exactly....crackelation situation in need of a proper doozination CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

I used a scarfing tip for a lot of my 20+ years in the mobile welding business before getting a Hypertherm 45XP plasma cutter with the gouging mode. Both work great, not that a carbon arc torch doesn’t have a place but, I’ve never owned one. I’ve used other people’s but never saw a reason to go out and buy one.

@NBSWELDING

20 күн бұрын

Hauling an air compressor big enough for the carbon arc is the issue for me CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

gee, dunno what your problem is, there is at least 1/4 inch of metal left holding that all together... better not fart on that!

@NBSWELDING

20 күн бұрын

Yep CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

.

@NBSWELDING

20 күн бұрын

Thanks for watching and commenting 😉 CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM

👍

@NBSWELDING

20 күн бұрын

Thanks for watching and commenting 😉 CHECK OUT THIS GANG MOWER Help me out with a comment & share on your social media kzread.info/dash/bejne/mH6Wr8yepM_ahMY.htmlsi=i_PTXBeUL5IewtcM