No video
TIG welding aluminum motorcycle case
TIG welding this cast aluminum motorcycle engine case while my Buddy had it apart for rebuild. Another good job for the ARCCAPTAIN TIG 200P.
For ARCCAPTAIN products use this link www.arccaptain...
Remember to enter promo code NBSWELDING5% to get 5% off and a free gift
For NBS WELDING T-shirts send Tina an email request at nbswelding@aol.com
For Thrive Supplements use this link nbswelding.le-...
Пікірлер: 47
Nice fix. Cast aluminum can be such a pain. And that's a good looking cup 👍
@NBSWELDING
2 ай бұрын
Yes indeed
No matter which metal you start with, everything you touch turns to gold. Damn nice work, C.B.!
@NBSWELDING
2 ай бұрын
Thank you
@NBSWELDING
2 ай бұрын
Appreciate the comment and good to hear from ya
Cup needs to say Less Yack'n More Tack'n with the thumbs up
@derekbryant6137
2 ай бұрын
I agree with that or something like run your welder not your mouth
@NBSWELDING
2 ай бұрын
Good point
C.B., looks like it never happened !!! Good job 👍
@NBSWELDING
Ай бұрын
Thank you
I like your idea. And maybe a QR code on the bottom for Kenny's business too.🤷♂️
That’s a smart idea for the QR code that would boost you channel Nice aluminum repair by the way Cheers from Nova Scotia
@NBSWELDING
2 ай бұрын
Thanks And good to hear from ya again 😊
Yup, you a Ninja!
Thank you for free education
@NBSWELDING
2 ай бұрын
Appreciate your commenting
Agree with @apollorobb " Less Yack'n More Tack'n with the thumbs up" and just one or two QR codes on each cup
@NBSWELDING
2 ай бұрын
Working on them now...thanks for the advice
Nice work CB thanks for the video
@NBSWELDING
2 ай бұрын
You bet
Very nice job looks great
@NBSWELDING
2 ай бұрын
Thanks 👍
Looks like 85-89 Atc250r/Trx250r stator side engine case.
Super looking job. The most important is that it is sealed.
@NBSWELDING
2 ай бұрын
Thanks
Aluminum is tricky, looks WAY better than I could do! 👍
Yeah, man the QR code is a great idea
Another great job CB! Yes on the QR . Good price too.
That turned out great 👍
@NBSWELDING
2 ай бұрын
Thanks 👍
Good idea
I'd buy one of those cups that would still be cheaper than a high-end Cup in a store local wherever it's at because look at this the brand Yeti those cups are almost $40 a piece I would definitely buy one of those cups and those yetis in some places are over 40 bucks so even with shipping anywhere almost it would be cheaper than a Yeti still
My wife wants a pink one. Lol
Hi from harold
@NBSWELDING
2 ай бұрын
Hi Harold 👍
The sound that you hear when Tig on Aluminum, is that what you hear as well or only because it’s picking on the microphone?
@NBSWELDING
2 ай бұрын
Your hearing the high frequency...makes that sound as soon as you hit the footpetal...sounds even worse when you speed up the video
👍
@NBSWELDING
9 күн бұрын
Thank ya!
Off topic here CB, my mig 200 when I'm using flux core, I'm normally welding 1/8 thick material. I use 030 wire and about 18v, and wire speed on 8, but unless I hold the gun right into the puddle, the wire stutters like crazy to the point its unusable. I'm using knurled roller (I had to purchase that separately my machine didn't come with one) and I even upgraded to the black torch. If I leave minimal stick out she's smooth, but I have a 130amp inverter synergic welder that's smooth whatever techniques I use. Any idea what im doing wrong?
@NBSWELDING
2 ай бұрын
So you mean you can take that same spool of wire out of the MIG 200 and put it in the other machine and it runs without any stutters? I know that the ARCCAPTAIN .030 flux core they sent me did not run good unless you run the stickout very short...I showed that in the part 2 review I did on that machine...but when I put Hobart Fabshield 21B flux core in it I could run it with a long stickout and it ran great so it was the wire and not the machine at all.
@NBSWELDING
2 ай бұрын
kzread.info/dash/bejne/aGiWz5WOn9y9aJM.html
@PaulFarrell04
2 ай бұрын
Cb, you might be correct about the wire. In my mig200 I'm running the large 4.5kg spool, my other machine I've the .45kg small spool of wire. I'll swap to the small spool and let u know the result
👌🏻🤘🏼🤘🏼
The qr code could even look like your bull symbol . Well kinda anyway
@NBSWELDING
2 ай бұрын
It doesn't look like the logo...I have it on my business cards