You saved me from throwing away money. I managed to take apart but could not remember the side of components. With detailed movie I manaved to put back together. Thank you very very very much

Very good and intelligent demonstration of how all the tiny parts are arranged. I'm about to dive into an identical shifter that has started giving me trouble and this will be of great help. Awesome song in the background. Tx.

Awesome machine. Loved the music in this. Cheers

Loving the dishes being washed in the background. Great video, i've a pair of old Campag Veloce shifters that i may experiment with.

You are a lifesaver!! I had one which was disassembled and then illness caused a delay before I could put it back together and by then I forgot all the different steps! I wasn't even as tore down into it as you are at the 8 minute mark. And the way that you stop rotate and reshow parts per step before you actually take the next piece off it's just wonderful and how ALL videos of this type should be made by everyone!! KUDOS now I just have to find a way to download your video reverse it so I can play it backwards to put everything back together LOL

@alanmann

Жыл бұрын

Glad you found it useful. That was a megga tricky one to take apart - probably did it 5 times before making a video which showed everything in it;s right place and the right way round :)

@kirkgeahlen5532

Жыл бұрын

@@alanmann I had a second one come in this week disassembled, LOL I wish these people would bring them in complete. But at least now it's ingrained in my head, LOL Thanks again!!!

Just about to fully service my 9spd ST-7700 Dura-Ace lever. This is just what I need! Thanks for the video. Very helpful!

@worldfrequency

7 жыл бұрын

I actually run into some difficulty to loosen that ring at 1:20. In your video you used a needle plier to catch the notches on that ring. That ring has 4 notches. I found it's impossible for me to loosen that ring. It's tightly bolted on. Any suggestions? Thanks.

Great help, thank s a lot! ST-A550 Shifters are very simmilar (almost identical). Viele Grüße aus Berlin

Gracias por su video. Me sirvió mucho

Very well done video! I'm in awe of how you show each component from so many angles so you can catch the details. I might not know I needed to see a certain detail until I can't get it back together right. I didn't see any broken bits in there and other videos suggest just spraying the heck out of it with solvent then lube. Even if I didn't take it 100% apart I could get things a lot cleaner with a partial disassemble before doing the spray and pray. Mine is a 2 by 10 speed setup, how many speeds is this one for?

Very interesting video, i would like to see the parts working together again. I suppose there is no a video o reassembling the shifters. Really complex mechanisn,

Thank you so much.

Did you record the left shifter also? I recorded mine but it stopped recording after 20 seconds and I didn't know until it was all apart. I have it back together but It isn't working right

Hello! Thanks for the video! In case you were still around youtube, I wanted to ask you this: the part with the thin spring attached to it that catches the gear (@6:45), is there a way to disassemble it in order to put a new spring on? Mine broke... Thanks!!

@Taktloss247

3 жыл бұрын

Yes. It is possible without the complete strip down. You have to remove the small clamp and than you can strip of the catcher.

Dicen qie el invento mas grande de todos los tiempos es el telefono celular, pero creo que es un error, he aqui otro invento importante

what is the background music?

@alanmann

8 жыл бұрын

Sorry, not sure, it's not from anything I have on my computer any more. :(

@eagerbob

6 жыл бұрын

Give it up Kutiman ? Princess Shaw kzread.info/dash/bejne/iaN82tGzj5Pfm6w.html trailer of the movie here: kzread.info/dash/bejne/oIGMqaucmJuYirg.html you're welcome

Olá, você poderia me ajudar ?