No video
Disassembling and reassembling a Shimano Ultegra 6800 shifter - a guide
Video shows steps in disassembling and reassembling a Shimano Ultegra 6800 shifter.
The video doesn't extend to disassembling the shifter 'core' assembly of pawls, cogs, springs and levers. I might make an attempt at that later. But if this or any shifter items have failed, this video shows how to separate the major parts.
I haven't looked at a 105 5800 shifter, but it's probably similar. Also, here is a video on 5800 shifter: • Shimano 105 ST5800 Shi...
Visit my FB page: / shifterupcycling
Пікірлер: 14
My shifter started to miss shifts when going to a smaller gear. By checking it visually I could see that some slop had developed in the shifting mechanism (right hand brake lever assy.). I was able to purchase the R.H. Bracket (Shimano # Y00E98060) which includes a new shifting mechanism. Your video was extremely helpful when I had to swap over the new parts; especially regarding the removal of the circlip holding the shift lever assembly pivot shaft. What a pain in the butt...but your video helped me stay the course. Thank you.
Looking for a video to help me repair a stuck LHS 6800 shifter and here you are! Thanks Delbified, hopefully this helps me out.
@delbified
2 жыл бұрын
good luck James, let me know how you go
Thanks, I managed to jam my gear cable cause I was installing them late at night and didn't line them up properly. Tried various methods to get it out but pulling the shifter apart was the only way. I managed to do it with minimal tools and a lot of swearing :-)
Hellor sir!Is Ultegra 6800 disc actuated?i use a java siluro 2 that is a disc brake version
hey mate have you done any disassembly on the inner mechanism, I took a part mine and i cant find the way to put it back again, thanks a lot, nice video very helfull
@delbified
3 жыл бұрын
I have Dimitris. Difficult over the internet but feel free to post a photo
@mitsossimos
3 жыл бұрын
@@delbified add me on facebook mate dimitris simos is the name thanks, i allready have order a new shifter if it is difficult for you to reply or help me on the assembly it's ok no prob
Hi, any idea if i could fit a Ultegra 6800 lever into a 105 5800 shifter? Thanks
@delbified
7 ай бұрын
If you mean to take the 6800 lever blade and install it into a 5800 shifter, it might work. They are a similar design. I'm not 100% sure though. You'd have to try and see.
Hi mate, I have a ST-6800 RH shifter with snapped housing. Do you know if it’s possible to switch the mechanism with the 6700 RH shifter?
@delbified
2 жыл бұрын
no sorry they're completely different. the 6800 housing breaks too easily. Shimano did a poor job with that. you can't fix it (to knowledge).
@brandonchan8539
2 жыл бұрын
@@delbified cheers for the quick reply