That's the first time I watch a maintenance video and my conclusion is "i wouldn't dare trying to do it by myself, even with a video to guide me"

@turbotonic27

2 жыл бұрын

Thats bad

@danielgembski4487

Жыл бұрын

Same here 🙋🏻‍♂️

Thanks for this! My cable broke inside the shifter and jammed it, and I couldn't get it out. Your video helped me get it working again.

crazy high quality video

very nice! It works again. Thanks very much for putting such work in it and putting it in you tube!

Thanks for the detailed video! This is helping everyone making bicycling an even more resource friendly way of transportation activity. I enjoy you enthusiastic and insightful approach to this sport.

Thanks, great video. I used your video as guidance when servicing a Dura-Ace 7900 right shifter. However, what a pain. It took 6-7 hours.

Absolutely amazing g to watch. My front shifter jammed and this gave me a lot of interest to take it apart and look. You’ve done something many would tell us impossible… ти chain bike shops. 😄

That's smart and effective work. thank you for posting this helpful video.

Thank you for this video, was able to save a customer's shifter because of it.

Thank you for reminding me why I never owned STI brifters! I've had LX rapid fire shifters apart despite the staked screws and corrected the spring that slipped off its stop. Lately I've taken refuge from technology by riding fixed gear only!

Dude i have this exact problem at this exact shifter, your video will be a huge help thank you so much

Love these explainer video's!

Muchas gracias amigo, he podido arreglar la maneta gracias a tu video 👏👏🙂

Nice ! with this video I repaired a jammed shifter (one pawl we see at 10:57 was stuck by rust) ! Thank you so much ! Few remarks though. 7:52 - This main shaft is secured by a pointy pressure screw. This tiny screw (1mm Hex) is located deep down the hole where you secure the side cover 17:59. Then the main axle is free to slide out. Not need to do this move at 8:12 11:26 - There is also this centering pin which is locating the 1st block in place. The pin goes into a hole in the white plastic PCB support. 14:26 - It has been easier for me to place the trust bearing on the other part we see at 14:43 as it was well centered then. 14:58 - Mention we have to place the pawls under tension when reinstalling. We see you do it, yes. But a commentary would have help. 17:03 - I think I forgot to reattach a spring helping the brake lever return movement. I'll have to remove it again.

Excelente. Muchas gracias!!!

Nice! Thanks, as always!

You are really good!!! Thanks!

It really felt like watching a watch master, fixing a rolex

Great whatchmaker's skills

Really professional

Excellent video !! One of the best tutorials i’ve ever seen on KZread. Thanks !!

Congratulation my friend 😮 wow

thanks good work

Amazing!! thank u!!

now that i've serviced an integrated shifter i think i can disassemble a nuclear reactor with my toes

Nice job! I have a few of those levers and there was a bad batch one time where the plating process was poor leading to rusty parts....🤷🏼‍♂️😐....those levers are still going ok though 👌🏻not really too much in there once apart 🤓

Great video, I have a 5700 right side shifter that is jammed , this is similar but still I'm having issues ldown shifting are rebuilding

Great~ too hard work.

Amazing step-by-step tutorial. I stumbled on your page with the new product for ugrading SRAM 11 to 12 with a simple ratchet swap. I wonder if it could be an option for the more complicated Shimano brifters @

I got a used ST-6700 right shifter, because I couldn't find a replacement spring. Works good, but the grease looked worn, and dirty. I heavily degreased with White Lightning, air compressor dried, then sprayed TriFlow. I think taking it apart would weaken the existing springs. I'm considering cleaning it again, and getting a mini grease gun to replace the TriFlow. I won't be taking it apart. One thing I noticed with my broken shifter, and my new/used shifter... when shifting to the larger cogs, the mechanism inside seems to wobble a bit. It looks janky. I'm not sure if new ones are like that, or if it's a wear issue. This does instill confidence, and I surmise that this unnatural movement could be causing the return spring to eventually break.

Loved my bike with 6700! But wait a minute, there were electronics in the shifter, like in all of them? Never ever heard about that or noticed it.

Brilliant..how you got that all back together I’ll never know! 😂

I end up here cause my almost brand new ( only 500km ) STI 4700 Tiagra whose small circular spring has decided to dislodge its end from its small hole making it so that the pawls no longer want to brake in each notch of the ratchet. In the upside down position which allows me to remove the bigger cover which is below the rubber hood , the pawl engage just by gravity but we can clearly see that he is loose and that nothing applies pressure to him so that he stays in the notches.it's so small to see that I can't even tell if the end of the spring is broken and if it is possible to reinsert it in its stop hole. Real Swiss watchmaker job that you can do ....Tabarnak long live bar-end shifters

Nice video! I found that circlip extremely annoying to remove hahaha Oh, and after disassembling, then cleaning, I discovered that the reason my shifter had stopped working was that the plastic hole which houses the biggest tension spring broke in half, so there's nothing to insert it into :( Also explained why the end of the spring was warped and bent....

the video is phenomenal, congratulations. I'm trying to open my 6700 right handle, it's stuck in the N°10 click and doesn't want to go down, do you know why this happens? in your video I've seen that it must be left in the lowest position of the pinion to be able to start disassembling it, I hope that you can help to me please.

Nice, maybe you can clean my Shimano STI too. Very well meticulously done🧐

good job & good video.. but i will just use wd40 or something.. 😂

Is there a way to change the lenght of the cable pull per click?

Do you work for Shimano? That is really complicated. My shifter on my second bike stopped working about 8 years ago. I started to take it apart but couldn’t fix it. Hopefully, I can find the parts and try again. Wish I saw this back then. I think I miss my vintage down tube shifters. I could actually shift faster with those things. Haha. Good job.

Is there a way to put the shifter mechanism into gear 10 if the ratchets skip? Without disassembly?

What is the part at 11:54 called. It's the white plastic piece that the shift cable goes into and pulls the cable tighter when you shift gears up.

Hi thanks a lot for the video I lost the spring that you install in 13.49 Can you give the specification of it Or a link that I can get it.

Wow

I've been trying to rebuild a ST 5700, 105, RT shifter. I've have been trying to remove the brake lever pivot shaft. I can not find the sir clip like the Ultegra shifter. I was wondering if you would know how to do it and Maybey give me some info on how to remove it. Thanks for your informative videos.

Please can you do a video on how you film. Can you show in more detail how you set up your phone camera and tripod.

That last spring (called the return spring) that he installs was broken on mine. Don't know where I'll find another without buying one 'for parts.'

What are the orange and black screw drivers you're using?

Great video, but can you explain better how to remove the seeger at 6:40 ?

Have you ever come across the stuck shifter problem on the R8000 left shifter? It can't be taken apart as easily as the 6700.

what was the szajbaze debacle another person here kept commenting about 9-10 months ago? could you tell us your perspective? (10 speed ultegra disassembly is something i should do on one of the bikes)

may i ask what is the size of the rectangular head screw under the clamp band? i’ve lost mine and i don’t know what size to buy. TIA

Is there a manual for these repairs, and if yeah where can I find it?

How do you adjust the shifter height for this model please? I cant find a video for it online ?

Hello, Danny, will you ever upload race videos again? Cheers!

can you make a video, how can I disassebly the brake lever unit? 3:32

what kind of grease are you using?

if the flex for my sti(flight deck) can i still use it manuall?

What grease do you use?

😍😍😍😍😍😍

Please help me where do i buy shimano clamping bolts

Your lighting is better here than in the other similar video on YT. Your major mistake was taking that spring off the plastic right away (it should be removed later from the metal part, and left on the plastic housing) and fully removing the pin and having the guts spill out. That helps no one understand what’s going on. You should of done like the other video, and gradually pulled the pin down, while sliding out each piece individually as it sits in the stack.

beautiful video , but the grease on the brass electrical contacts absolutely not

I have a similar 105 10 speed with the problem you described at around 16 40 mark, Shifting down . I opened it up and I can see the problem, the down shifter doesn't stay down. After shifting up if I push the whole mechanism down it will work if I don't push it down it wont shift down. I need to tighten the mechanism but I don't see any screws

@atlantaswelder

3 ай бұрын

Me Too

@imsoniceee

3 ай бұрын

@@atlantaswelder there is a video showing how to fix this m.kzread.info/dash/bejne/pp-ZutKYfrnMfag.html

What grease do you use? The link is not working anymore

I need the same video but for the 8020 shifter and can't find it, plus this one doesn't help me. :/

Czy tiagra 4700 zbudowana jest podobnie? Mam problem ze sprężyna napinającą małą dźwignię w prawej klamce...

WOW, This is insanely complex. So glad MTB is simple. Beautiful engineering though.

@markifi

2 жыл бұрын

mine has 50 thousand+ kilometres on it and only now starting to develop problems, so must be really well made stuff unless i'm just lucky with it (i have the last 10 speed version that still has the shifter cable coming out on the side, i think it might be 6600 but not so sure)

Ohhh my 😶😶👾

Can I use it for Sh dura-ace 7900?

Any chance to send in myy 9170 for trouble shooting? Cheers from Hamburg / Germany 🙂

Excellent video!! I found out that the "smalest spiral spring" left in the "frozen video image at 09:09" was broken. Does you or anyone here know where to get spare parts like this from Shimano?? It would be amazing to fix this without buing a knew one.

@GNX157

Жыл бұрын

The best bet would be to look on eBay first to see if anyone is selling a “parts only” shifter, and see if you can find out what is broken about it. I have one here but same as you, springs are broken as well as a pawl pivot worn.

@thereisnoiindaly

Жыл бұрын

@thomasbergefoyn2559 or @sickbiker Did you find a replacement spring? I'm looking for the same part right now.

Is there any chance you can do one on rebuilding an Ultegra 6600 10 speed shifter?

@guy4850

5 ай бұрын

Yes please, I need to rebuild one of these myself.

Allright Baldi.

@SomeAngryGuy1997

2 жыл бұрын

Whatever hairi.

Does anybody know where I can find the fixing nut for inner mechanism from 7:32, or the bolt with the nut, or the Shimano code for it?

@trekkeruss

Жыл бұрын

I am certain this answer is too late for you, but Shimano does not recommend complete disassembly of the STI unit, and does not offer parts for them. The only way to get parts would be to salvage them from other shifters.

And that's why the road shifters are so damn expensive.

Wow! I can see why they're expensive!

@markifi

2 жыл бұрын

kind of puts the whole electric shifting thing into perspective. a servo motor with a wireless button seems less complex than this.

Now I know what not to buy. I need to get out more.

My left shifter is moving won’t shift gears after accident

Alguien conoce el nombre del sistema interno que se trabó

the electrical contacts on the PCB should not be greased.

@ivanteo1973

2 жыл бұрын

@@altern8tive That's incorrect, grease (as used in bicycle) is non conductive and act as insulation. this is why you will never see grease being apply to electronics.

@iffy_too4289

2 жыл бұрын

So do you use something like Deoxit to clean and assemble the contacts dry?

@dolinec

2 жыл бұрын

You right, but do you think that he will ever use it with the Flightdeck computer? I don’t think so ;)

My shifters were working fine but i wanted to regrease them properly this way. gotta be the worst maintenance procedure in the history of maintenance procedures, maybe ever. was successful tho

Dauntingly complex

mistake 19:45

hi

Those were bad shifters. Even when new. Not Shimamo's best product...

very complicated

@zeez4178

4 ай бұрын

And delicate and not a chance to but spare brocken plastic parts

Shimano revoshifter the most garbage shifter till date

@Schabo1234

2 жыл бұрын

Revos are on kids or cheap adult bikes.