Brilliant video. Impossible to do rebuild without this! Thaank you

@levelomec

Жыл бұрын

Thanks!

@benedikte.2729

Жыл бұрын

You re damn right

Thank you! The snag I hit was on the release lever spring. It wraps around a bushing, but I was letting it jump above the bushing while setting its tension. Also, it was easy to fab a tool for the four-notch mech locking nut out of brass tubing, making it easy to trial fit the mech.

Bravo pour cette super vidéo, j'ai pu réparer quelques leviers défectueux grâce a vous (y), par contre a la fin de la vidéo j'ai l'impression que vous remettez l'axe du levier dans le mauvais sens ;)

@levelomec

4 ай бұрын

😱 tu as raison!! Merci!

Спасибо тебе, добрый человек!!!!)

Thanks!!!

Bravo, le Vélomec : beau travail. Il y avait des étapes et des détails que je n'avais pas pu voir correctement, sur d'autres vidéos concernant le démontage et le remontage des ST-1055. Là, et avec beaucoup de patience, tout fonctionne ! Quinze mois que j'attendais ça... Merci , merci beaucoup ! Une question : j'ai l'impression que je ne peux utiliser que sept couronnes sur les huit. Qu'est-ce que j'ai pu louper ?

belo trabalho

@levelomec

Жыл бұрын

Thanks!

Hello ! Very good video that helped me a lot for my right shifter ! But I took my left shifter to pieces and I can't find any video that shows how to put it back together ! Did you ever record he same video for the left shifter ?

@levelomec

Жыл бұрын

Hello and thank you. I have a video of a full rebuild of a left 3s shifter too, see at my videos.

Hi love the video-using it to re-build a lever as I watch-- keep getting stuck though- cant work out were the spring ends, in between the plates go/ butt against at approx 22 to 24 mins , can you help please?

@levelomec

Жыл бұрын

Seen from above: The shorter angled link of the spring clicks into the upwards bent ear from the lower plate. The longer angled link of the spring, going counterclock wise from the smaller one, clicks into the downwards bent ear from the upper plate. Watch very closely in high resolution, it's hard to describe

Good work, do you know if u can adjust the lever clearance to the bar? To reach the levers easier. Like for smaller hands for example. Cheers

@levelomec

Жыл бұрын

Thanks. To my knowledge this is not possible. Maybe try other bars or add a spacer where the lever is stopped in the housing

@nils_on_wheels

Жыл бұрын

@@levelomec yes.. Putting a shim/spacer in between was one of the solutions i was thinking about. But i think about some modern compatible levers. U maybe know of some modern and compatible 8 gear levers that could easily replace the old ones here and have a better shape and adjustment points? Cheers

@levelomec

Жыл бұрын

The Shimano Claris St-R2000 are 8s and reach adjustable however I'm not sure if compatible with old 8s derailleurs

Hey! Just found your video!! Im restoring an old vitus 979 with a shimano 105 groupset. The groupset is ok but both brifters are not working. Probably because its been 25 years out of office. Do you have any recomendation? I was thinking about using a degreaser before disassembly and hope it is just old grease, or just disassembly like you. Thanks in advance Ooh it is the same model as yours but 2x8. St1055

@levelomec

Жыл бұрын

In my experience it's usually old grease that blocks the mechanism. You can try to soak it in degreaser for some time. maybe it works, otherwise take it apart 🤞

@carlossiciliadiaz2656

Жыл бұрын

@@levelomec i opened the brifter yesterday. It was actually really cleaned but it doesnt move at all. Theres a really tiny spring that doesnt look its doing anything… do you know anywhere that could fix it? In spain they said they dont work with old shimano parts. They offered you to buy a new one… thanks!!

@levelomec

Жыл бұрын

@@carlossiciliadiaz2656 try WD40 first and jiggle all parts with a tiny screwdriver. Maybe, if not yourself, look for a person around you who knows how to rebuild it.