Sawmill Build Start to Finish
Ғылым және технология
This is a full process of a swingblade sawmill build - made from scratch. The function of the mill is in its name "swingblade" - the blade swings 90 degrees making it possible to cut both ways while moving the carriage up and down the log resulting in dimensional lumber in one pass. I built a chainsaw mill ten years ago and milled lumber that I used for my cabin / sauna house project. Then I built a bandsaw mill five years ago and used the cut lumber to build a partition in my barn I currently call my workshop. Both of them worked great, bandsaw mill was faster than chainsaw mill for sure. But I think I there's an even faster mill and swingblade sawmill in my opinion is just that. There are different types of swingblade sawmills, one type utilizes a railway system where the saw carriage rides on rails so both rails are in the way when loading the logs. This is a beam-type mill where the saw carriage is suspended on a single beam over the log that sits on the ground fixed by a couple of wedges so it doesn't roll off while cutting. There is no need to clamp the log down, there's no need to move and turn the log. Cut depth and width adjustments are all made on the sawmill beam end frames. I think this design is ingenious! And it cuts great!
This sawmill build is based on www.turbosawmill.com "Manual Mill" design and it is patent pending.
My other videos: kzread.infovideos
Support me on: / donndiy Follow me on: / donndiy
#donndiy #homemade #sawmill
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Пікірлер: 177
My other videos: www.youtube.com/@DonnDIY/videos Support me on: www.patreon.com/DonnDIY Follow me on: instagram.com/DonnDIY Swingblade sawmill build series with full length videos: kzread.info/head/PLkmF7FAZBzkWuunWOOh0zSzB1LllQdUKr
Thank you Donny for not succumbing to the temptation to add music to your videos. I like the fact that I can hear the whole process of what you are doing. The grinding and cutting noises add to the video. From Andrew (Australia)
Man Donny, what a feat of engineering to make that track! My hat is off to you sir! Outstanding job!
I've watched this channel since he began. He's an absolute inspiration and it's awesome to watch his skill level increase. He is past master at this point.
Excellent project build from test bed to full beam, top job Donn.
Definitely a win. I can’t imagine what you’re going to do next.
you are a genius and very fine maker
The REAL beauty of a personal sawmill is NOT cutting regular dimensional stock but sizes that the lumber store doesn't have and can't get. It literally changes your designs from the inside out, for the better.
@DonnDIY
4 ай бұрын
Yup, only imagination is the limit.👍
Almost a million subs!! Awesome channel and loads of cool projects you've done, well done to you sir. 👍
Hallo Donn , ich wünsche Dir und deiner Familie eine schöne Weihnachtzeit und viel Gesundheit ! Ich persönlich hoffe auf auf viele neue und tolle Projekt im Jahr 2024 .🤔🤔 Dank und Gruss Markus😁😁😁
@DonnDIY
4 ай бұрын
Danke, Markus. Frohe Weihnachten und viel Gesundheit für euch auch!
Mammamiaaaaaaa, t’es un artiste … T’as pleins de choses que nous pouvons apprendre de toi Merci 👏😊
You are monster builder. Standing ovation Sir.
Hello from the Netherlands. thanks for the video Donn . Kind regards, Hollandduck
You are the best mate keep up the great work Ray from down under
Well done Donny your accuracy cutting with the angle grinder is amazing I don’t do enough and what I do is rubbish keep it up👍
Absolutely brilliant. From Australia 🇦🇺
@DonnDIY
3 ай бұрын
Cheers!
Kamu adalah Sosok idola saya...semua ide dan hasil karyamu sangat memberi inspirasi untuk saya...sukses selalu kawan...you the best
Brilliant! I need something like that in my remote areas of the Mighty Sepik River & Keram villages in Papua New Guinea. Thank you for sharing this informative video. Greetings from Madang, Papua New Guinea!
@DonnDIY
2 ай бұрын
You might want to check out Turbosawmill products which design my sawmill is based on. They will definitely have something suitable for you. 👍
@luimackjohnson302
2 ай бұрын
Thank you very much, May God Bless you.@@DonnDIY
amazing job , i have watched from start to finish
Wow, donny. This is an awesome mill. I love the way you built it. Light but stiff. You got skill and sense like no other. Love your projects. Someday i am going to buy some of your plans. Only got 15 more projects before that cheers from western washington usa😊
Хорошая у вас мастерская! И работаете хорошо!
Love watching all your builds bro! Top notch!
Exceptional work. Respect👍
Now that's a great build it video! One of best i've ever seen- Amazing job Donn!
@DonnDIY
4 ай бұрын
Thank you🙏🙏
I'll go along with that, it's definitely a keeper. You did a fantastic job building the swing blade saw. Thanks for sharing this quick version too but I really enjoyed the ride along on the initial build where you were making and changing to begin with. That really showed the hard work and fabricating that you do so well. You did good my friend. Stay safe and Peace be with you and your families during this time of the year and may Happiness continue through the new year ahead . O D D Fred.
@DonnDIY
4 ай бұрын
Thank you for the good wishes Fred. May you and your family be safe as well! 🙏 Greetings from Estonia.👍
Safety first Good job
Снимаю шляпу! До таких глобальных моментов я не доходил.
this is one big electric motor, I was surprised seeing it LOL
I LIKETHIS VIDEO IT IS AMAZING THANK YOU FOR SHARE TO VIEW AND I WISH YOUR CHANNEL MORE SUCCESS,
Excellent travail
Amazing work 👌
Thanks again 👍 bro
51:16 🎉 прекрасная инженерная работа!!!
God jul til dig og din familie jeg ser alle dine KZread indslag hilsen fra en fan fra Danmark .😊
@DonnDIY
4 ай бұрын
Happy holidays from Estonia.🤗
The best and the calculations done on the number
Make a roof for it keep the weather off great build
Master machinist, precision.
Pretty sweet.
Genial vídeo, y una obra maestra su construcción caballero!.
I think that mill's not only a keeper, l think it's a seller! Bandsaws are nice, but that looked perfect, nice job. You should be proud 🦚
@DonnDIY
3 ай бұрын
Cheers! 🙏 I am. It took some time to build it but I'm super happy with it.👍
WOW well done. Keep up the cool vid's.
Increíble!!! Felicitaciones 🎉
Sa oled vägev metallimees, olen jälginud mitmeid aastaid kuidas asjalikult kokku pandud videod on, kahjuks meil 60-tel oli saksa keel, sellegi poolest pilt näitab ju rohkem kui tuhat sõna..kas lõikasid saarepuud, tamm ja saar on kanged puud aga muster ilus, jaksu edasiseks! Piä`vasta!
@DonnDIY
4 ай бұрын
Sestap üritangi videod nii üles ehitada, et keelebarjäär väga ei segaks. Tööprotsess on jah õnneks universaalne. Lõikasin saarepuud. Oli kõva kui kurat.😀
Exelente proyecto ¡ de Argentina 👏👏
Très très bon travail j'adore
Ya! ah ha! i think that beast is a keeper .good job man.
OUTSTANDING, DESIGN, BUILD AND DEMONSTRATION OF FINISHED PRODUCT, KUDOS.👍🏻👍🏻👍🏻👍🏻👍🏻☀️☀️☀️☀️✌🏻✌🏻✌🏻✌🏻😁
@DonnDIY
3 ай бұрын
Much obliged!🙏👍
País : BRASIL 🇧🇷 Estado : Ceará Cidade : Fortaleza Trabalho fantástico ! 👏👏👏👏👏👏👏👏
16:34 Nice modification to the vernier calliper.
Wenn man Ihre Videos anschaut, fragt man sich ernsthaft, ob es auch etwas geben mag, das sie nicht beherrschen !? Es sieht alles so spielerisch leicht, einfach aus. Ich bin aufrichtig beeindruckt !!!
@DonnDIY
3 ай бұрын
Danke!
Interesting. Very nice work
wow, this is very impressive as usual! congratulations
@DonnDIY
3 ай бұрын
Thank you🤗
Excellent 👍
@DonnDIY
4 ай бұрын
🙏
Sweet!!!
Pretty slick :)
AL FINAL MI COMENTARIO EN UN VIDEO ANTERIOR TE VINO BIEN LO PENSASTES E LO HICISTES BRAVO
Fabuloso el video , es usted un maestro . 👌👌💪💪👍👍👍
BRAVO !!!
Very clever D I Y sawmill 👍👍💯❤ thank s .
@DonnDIY
3 ай бұрын
Thank you🙏
Достойная работа настоящего инженера. Один момент-сделай себе стульчик поудобнее а то как то не очень сидеть в гараже
Merry Christmas to you and your family Donn.🎄
@DonnDIY
4 ай бұрын
Merry Christmas!🙌
That IS very well , thank you
Super! Danke!😍🤗
Я не вижу никаких чертежей, вы просто необыкновенный талант.
Everything is beautiful, but I notice a small and quite important detail - the beam is not stiff enough and bends under the weight of the stroller. As a result, the center of the cut boards is bent relative to the edges. Element to be improved. Apart from that, it's a nice patent. Regards.
Thank very much for this very Video
Buen trabajo feliz navidad desde México
@DonnDIY
4 ай бұрын
Feliz navidad!👍
le top je ne trouve pas les mots
Hi Donn, great build, every time I see you cutting with the anglegrinder I wonder how can he cut that straight even a CNC couldn't get it better!
@DonnDIY
4 ай бұрын
Cutting with an angle grinder is so satisfying. The more you do it the better you get. I do alot of it.👍
no planned obsolescence! ☕🙂🌞
Да, как сделать ровные направляющие, это отличная идея, просто прекланяюсь перед мастером!
Super!!!!!!!!!!!!!!!!!❤
@DonnDIY
3 ай бұрын
👍🙏🙏
Впечатляет результат! Ещё бы подачу автоматизировать и вообще класс!
Are the boards pretty consistent in width and thickness or will they have to be planed? Great job!
MM77 Approved 👍🏼👍🏼
Great job. Any idea how many hours to build? Looks professional.
Thanks
making it to be able to do taper cuts also?
Отличная работа и полезный станочек можно начинать небольшой бизнес
@DonnDIY
3 ай бұрын
👍
I quite enjoyed the start to finish video on this. I wouldn't mind seeing some more sawing in the future, the way this works is pretty slick. Big plans with the lumber?
@DonnDIY
4 ай бұрын
More sawing will probably come since I intend to saw alot of lumber. For what project - I'll reveal in the future.👍
Genial
Какой марки у вас токарный станок?1К62?
The English captions are excellent and add tremendously to your videos ... _but they flash off too quickly!_
It should be a band saw. That's how I would cut everything.
@DonnDIY
3 ай бұрын
I built and used a bandsaw for awhile, full video here: kzread.info/dash/bejne/m3eZtq-kmc3Vgps.html But I still like the swingblade better due to less physical work involved with handling the material and faster cutting in general.👍
Soovitan teil vaadata üle kanal nimega I did a thing, too härra teeb ka huvitavaid projekte aga proovib sisu naljakaks muuta ja see toob palju inimesi vaatama.
رائع...🙂
Testereyi nereden nasıl temin ettiniz Türkiye de bulamıyorum yardımcı olurmusunuz
good
Siis võib-olla järgmiseks projektiks tuleb üks kombineeritud höövel ja freespink? Uskumatult kena töö. Häid jõule! 🎄
@DonnDIY
4 ай бұрын
Neid vist lihtsam osta seal 250-300mm töölaiuse juures. Aga kui juba laiemaks läheb, siis vist hinna mõttes oleks jah mõistlik ise teha. Samas pöörlev mass suureneb ja sellega koos ka risk.😛
Are you going into competition with Turbo Sawmills? If so, when does production start? An event to look forward to! (-:
@DonnDIY
3 ай бұрын
Nope, I just needed a sawmill like Turbo Sawmill and made it myself since I don't have money for the real one.😀
Very nice work! i would use 3phase electric motor and bigger blade. Everything else is fantastic!
@DonnDIY
4 ай бұрын
It is 5,5kW 3 phase motor.
@dsadzaglishvili
4 ай бұрын
@@DonnDIY than my mistake. 😎
@dsadzaglishvili
4 ай бұрын
@@DonnDIY in some point i realized motor was struggling to spin a blade while under load.
@dsadzaglishvili
4 ай бұрын
@@DonnDIY Do you use direct 3phase or rotary phase converter?
Anyone else automatically started squinting when sawdust started hitting the camera?
@Urmomsboyfriend01
2 ай бұрын
How did you know? ARE YOU IN MY WALLS
Tundub tammine olevat 🤩
@DonnDIY
4 ай бұрын
Jaa, peaaegu. Aga tegelikult peaks olema tegemist saarepuuga.👍
@mata9154
4 ай бұрын
Kenad nad ju mõlemad. @@DonnDIY
Oled ikka väga kõva nikerdaja 💪💪 Ehk selle juhtme saaks panna nii, et jalgu ei jää 🤔 Jõdu ja jaksu ning uusi ja huvitavaid projekte 🙃
@DonnDIY
4 ай бұрын
Jah, see juhe ajas ka ennast kohe närvi ja see tuleb normaalselt installeerida (tross üles ja trossi külge jooksma). Aga ma ei suutnud enam oodata ja tahtsin saage katsetada.😀
Mr. Chop 😂😂😂
brilliant, better swing blade!
Просто супер. Ок
👍👍👍🔥❗
👏👏👏👍
Moin, Moin! Question) Plasma cut is not for you? You never don't use it, why?
@DonnDIY
3 ай бұрын
I didn't use CNC plasma on this project but I will use it on upcoming ones.👍