Restoration of MYSTERY Dirty Piece
Тәжірибелік нұсқаулар және стиль
Hi! Today, the restoration of the mysterious dirty scabbard and, in my opinion, the knife. My friend's new find. The leather suspension and the tip of the handle are visible. We are starting to restore.
After removing the dirt, I found a piece of steel inside the roughly made iron "scabbard". After a complete cleaning, I determined that it was a piece of a saber of the 1881 model (I am 95% sure of this!).
The steel is good - the project has begun. I'll make a knife. I used the back of the blade where the holes appeared from the rust.
Furthermore, I adjusted the blade, sharpened it and took a deer horn for the handle. Secured with two rivets and glue.
I additionally processed and made an ordinary leather case from the leather of an old boot in which this blade will be stored.
I also did the usual test for you, do not forget to share this video. Thank you!
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #restoration
Пікірлер: 213
An old very rusty dagger 😍kzread.info/dash/bejne/nnabz9qSnrXWlZs.html
Always a great day when Screws and Tools posts a video!!! Cheers, Alex!
@ScrewsAndTools
2 ай бұрын
Thanks))
Спасибо большое! Субтитры читаю!) Ножику вторая жизнь!
Sehr schöne Arbeit und nicht schrecklich wie Du sagst. Dankeschön für Deine Hingabe und Kreativität.
There was nothing terrible about that restoration, just your normal way of showing how a piece of scrap can be beautiful again. Another great video.
Алекс приветствую Вас, из куска старого хлама получилась вещь, которая прослужит ещё не дин десяток лет, уважение за Ваш труд.
Привет Алекс, и не ужасно а прекрасный нож получился, выглядел он ужасно до реставрации),вставки нравятся, как всегда спасибо за работу, пошел я видео реставрации движка смотреть 😊
¡Excelente!😀🛠🗡❤👍
That's not a restoration, its a resurrection ;)
@memati1110
2 ай бұрын
Most accurate comment 😅👍
Отличный ножик, как всегда отличная реставрация, ничего ужасного :) А в режимен доселе и опосля - так вообще великолепно 👌
Очень здорово получилось! Отличная работа!
Nice choice of handle, my friend! ****beep-beep****
That was amazing
Cool, Mad Max style)👍
@ScrewsAndTools
2 ай бұрын
Oh yes, exactly))
Very bad corrosion! You did a great job restoring it! Looks very nice!!
You say it looks terrible, i think you resurrected a piece of history for future usage. FANTASTIC!!! I would use it in my workshop.
Great restore and it turned out awesome. 👍
@ScrewsAndTools
2 ай бұрын
Thanks Aalan) ^_^
Excellent work!
@ScrewsAndTools
2 ай бұрын
Thanks!
Dope AF results, @ScrewsAndTools!
You are an amazingly creative restorer! Bravo Alex I love to see you restore the impossible! 😊❤
Beauty and functionality do not have to go hand-in-hand. You found a piece of blade steel in something you did not expect. You turned it into a functional tool. That is were it's beauty lies,. A blade that anyone else would have tossed, you made useful. Keep up the great work.
@ScrewsAndTools
2 ай бұрын
Thank you for your attention and feedback
You are good at everything you do!
@ScrewsAndTools
2 ай бұрын
Thanks
Hello . I like your videos. A satisfying video. But I see you are doing very well.
Amazing job. Essential but elegant
Отличная работа❤ Простой нож, но один из самых красивых👍Би бип
Wunderschön geworden, mit der Hornspitze fand ich es sogar noch besser. Super Arbeit, danke 🎉👍🏻🥳
@ScrewsAndTools
2 ай бұрын
Danke für Ihre Aufmerksamkeit!
Нормально! Здоровья и Удачи!
Awesome always cool stuff always thanks
@ScrewsAndTools
2 ай бұрын
Thank you!
The beauty of your videos are not the final results of the journey but showing that being resourceful with the tools and knowledge available, anyone is capable of restoring something. For example, i don't have a bench grinder. I got creative and figured out how to make a temporary grinding wheel with a drill. Wasn't perfect but it worked
Very nice! Beep beep! 👍👍💪💪
Hello mister Screws beautiful restoration well done
@ScrewsAndTools
2 ай бұрын
Thank you!
Que barbaridad de trabajo hiciste hermano y esa funda impresionante ,me encanta verte trabajar no cabe duda que eres un maestro en esta arte 🤗🇲🇽 saludos y bendiciones para ti hermano ☺️🙂 nos veremos en el próximo video
Мне очень интересно где вы читаете комментарии?😅 Прекрасная работа. Из обломка восстановить целую шашку не реально. А сейчас Вы подарили этому кусочку металла, со своей инсторией, что не маловажно, вторую жизнь! Это прекрасно!
Amazing restoration as always 👏👏
Quedó espectacular,te felicito tovarich
Hello Alex, I think it's a great restoration! Any knife with a horn handle is good! The perfect shop knife! Thank you for another great video! All the very best to You and Yours from Brian in Southern California
Its a nice and simple restoration. Looks like somebody tried to turn that old Shashka into a dsgger but it was left alone for years. Good to see you still gave some life and character to that remaining piece!
Мастер! Критиковать могут те, кто сам подобного делал к сожалению. Я , например, уже второй год делаю ножик😂 и понимаю как это долго и сложно. А у тебя каждый раз оригинально выходит!👍
I think it looks good! Unique knife with an interesting history!
@ScrewsAndTools
2 ай бұрын
Thanks, yes. look strange and not nice but now it will work)
That’s not terrible!!! It looks great 👍🏻
Bravo brother ❤
АЛЕКС ПРИВЕТ ! ХОРОШО ЧТО ВЫ НЕ БРОСАЕТЕ СВОЁ ЗАНЯТИЕ И ПРОДОЛЖАЕТЕ НАС РАДОВАТЬ СВОИМИ РОЛИКАМИ. В КОНЦЕ РОЛИКА БЫЛИ СЛОВА ЧТО ВЫШЛО НЕ КРАСИВО НО " ПОД ПИВО " ПОТЯНЕТ. А КОГДА ЖЕ КРАСИВО БУДЕТ ? ВЕДЬ ВИДНО ЧТО МОГЁТЕ И КРАСИВО...
Very interesting, a sabre into a dagger restored with a very serviceable sheath. Nice story.
@ScrewsAndTools
2 ай бұрын
Thanks
always good to have a shop knife handy
@ScrewsAndTools
2 ай бұрын
Thanks!
Alex, if this is going to be a "Shop knife" could you not have made it all shiny, shiny? LOL! You know me, I like shiny things! You did great with this one. Like the shotgun shell end by the way! I never would have thought of using one. Stay safe my friend! Bob and Teresa
Очень понравилось! Спасибо, Алекс!
@ScrewsAndTools
Ай бұрын
Спасибо за интерес!
It's not terrible. It's a real miracle. Wonderful work. I liked it a lot.
@ScrewsAndTools
2 ай бұрын
Thank you!))
Abraço aqui no Brazil 🇧🇷👍👏👏
Best knife is the one you have. I’d be proud to have such a blade. 👍
@ScrewsAndTools
2 ай бұрын
Interesting feedback)
You are too hard on yourself Alex, what you consider as "Terrible" is a wonderful job in my eyes.
@ScrewsAndTools
2 ай бұрын
Thank you!)
Бип Биииип👍💪🙏 всем добра 🤝 как всегда на высоте все 😂
My mentor would often call a blade like this well for him made from old machetes or corn knives a hack blade. The idea was simple enough reusing old steel to make something new and you did that wonderfully brother
@ScrewsAndTools
2 ай бұрын
Thanks for feedback!
still good job:)
Nice work, that is the kind of knife you can beat on and not feel too bad about it.
@ScrewsAndTools
2 ай бұрын
Yeah)
素晴らしい技👍
Алекс ты всё делаешь считай на коленке, но результат реставрации всегда классный. Спасибо за субтитры, лайк мастеру.
@ScrewsAndTools
2 ай бұрын
Спасибо учусь)
Молодец, хорошая работа.
It looked a whole lot better than it did before you restored it.
Хорошая работа. Тыльник рукоятки и лезвие подходят по стилю и дали новую жизнь старым сапогам.
Отличный нож! Можно и на охоту!!!
The horn and shell casing give it a hunters knife look. Another old sword gets new life as a new knife 😄. And at 5:55 yes it was! 🤣
Какой Вы молодец! Златоустовские мастера знали толк в холодном оружии как и Вы!
@ScrewsAndTools
2 ай бұрын
Спасибо, мне очень далеко до них, я учусь всего лишь
Отличная работа, всегда ваши видео смотрю с большим удовольствием.))))
@ScrewsAndTools
2 ай бұрын
Спасибо!
Из за ножика для мастерской жена теперь босиком ходит? Естественно палец вверх.
A whole lot better than sitting in the ground for another 100 years!
@ScrewsAndTools
2 ай бұрын
hahaha yes)
It went from something that looked almost like a turd to something that looks almost like a knife! Seriously though, I really like the refreshing honestly and discovery of your work and you make good use of the materials you have at hand. Nice video!
@ScrewsAndTools
Ай бұрын
Thanks for feedback!!
Спасибо за субтитры)
I don’t think it’s terrible at all Alex, I think it’s pretty cool! I think the addition of the shell casing was a neat touch, what was the caliber of that casing? You sure didn’t have much to work with but you turned it into a useful knife! Always enjoy your wok!
Незнаю что скажут другие но по мне так из мусора в рабочий нож это просто супер, там более это ещё один кусочек истории. Всех благ успехов и процветания, а также больше нового (с кусочками истории). БИБИП.
@ScrewsAndTools
2 ай бұрын
Спасибо)
Привет Алекс , приятно смотреть как ты мучается восстанавливая из хлама . Главное что получаются достойные вещи !!!! Но как ты при этом мучается , смотреть приятней!!!
странные звуки ? Алекс все время на кого то спирает , оператор наверное виноват ! нож нормальный получился , я примерно так и реставрирую ! )))) Удачи Алекс , ждем новых работ !!!
კარგი ნამუშევარია 👍👍👍
@ScrewsAndTools
2 ай бұрын
დიდი არაფერი, მაგრამ გადაგდება დამენანა, მაინც კაი ფოლადია. მადლობა!
@bogverius.i
2 ай бұрын
@@ScrewsAndTools სახელურიც მოუხდა, ნანადირევისათვის კარგი იქნება. 👍👍 წარმატებები
@ScrewsAndTools
2 ай бұрын
ასევე, გაიხარეთ! @@bogverius.i
Я доволен)
The seath it wasn't anything much, but the bullet at the tip of the adler was brilliant.
Би биб 👍
If you gave this man oil he would restore it back to a dinosaur! Love your work...beep beep!!
I would never have thought of reusing a cartridge case as a knife pommel but now that you showed it, it’s kind of obvious. The primer hole is ready made to put the lanyard through, even. Shotgun shell, right? I almost had a heart attack when you tossed the sheet metal from the original scabbard but then I realized that it could not be original to the saber the knife was made from because it was only folded, not welded or soldered. You call the finished project ugly, I call it utilitarian. Nothing wrong with that. I expect to see it working as hard as you do in future videos. Beep beep!
Привет, конечно выглядит не казисто, но центровка вышла и сталь отменная!
Screws And Tools развивающийся - вот и до метания добрались!)))
@ScrewsAndTools
2 ай бұрын
Было весело)
Базар жок
კარგი სამუშაო, როგორც ყოველთვის
Нормально. Лучше чем просто выкинуть 😁👍👍👍🤝🤝
@ScrewsAndTools
2 ай бұрын
Выкинуть бы рука не поднялась, а интерес к грязному и ржавому никуда не делся
very cool
👍👍👍👍👍👍
Все хорошо, вы отличный мастер. Субтитры очень помогают, спасибо.
@ScrewsAndTools
2 ай бұрын
Спасибо, учусь
Даже если бы это был ты, мы бы не расстроились) и ничего не сказали бы тебе, раз ты из раза в раз повторяеш эту шутку 😂
@ScrewsAndTools
2 ай бұрын
А вы про какую?) Я старый сразу и не припомню
@user-oq5yk7tt2r
2 ай бұрын
@@ScrewsAndTools про клей и звуки жизнидеятельности
@ScrewsAndTools
2 ай бұрын
хахах))))
It was an old style Bayonet which would have been in a sleeve that was part leather part metal as the metal dragging across the metal as it was pulled out would have assisted to keep it sharper for longer.
👍👍👍
гаумарджос Брат !!!
@ScrewsAndTools
2 ай бұрын
Гагимарджос!
Miracle, you are using globes
Привет Алекс я сразу ставлю лайк не глядя. Первый раз вижу тебя в перчатках в чëм дело? 😊
@ScrewsAndTools
2 ай бұрын
Благодарю!
Привет Алекс! Почему ужасно? Ужасно это когда вещь забыта, утеряна, а это возвращение к жизни. Да простой нож. Но мы не пользуемся каждый день произведениями искусства и порой самый простые вещи - самые ценные. А на счет звуков выдавливания клея, признайся 1 из 10 случаев все же это ты😂. С уважением))) Удачи!!!
40х10с2м-ЭИ-107, Rockwell 57,4.
Bunun geri pas tutmaması için ne yapmak lazım usta
Это ж сколько летов клинок провалялся в грязи? 😮 Неужели почти 140 лет?
That’s not bad knife throwing.
The cap and lanyard look good and are practical, but I think that it would have looked cool to have the curved horn down to the point. But that is just me seeing too many fantasy daggers.
Моё одобрение!!!
О, опять кусок грязи стал чем-то восхитительным. Кайф.
Особо нравится когда не получаются ножны.