Restoration Rusty SHAMSHIR - FIERY Blade
Тәжірибелік нұсқаулар және стиль
Hi! Today, the restoration of the Shamshir saber. My friend gave me the scimitar and asked me to restore it. The condition is poor, the tip of the saber is broken (I am forbidden to use welding to lengthen the blade by a friend) The guard of the saber is also broken and rusty. Well, I'll fix it and restore it.
The blade of the saber.
My first duty was to use a rust remover. After the first cleaning, I used a soft iron brush. I sanded the surface of the saber with sandpaper and a polishing mixture.
The shape of the blade is fiery (this is the first time I've seen it) and I decided to give the effect of fire by using copper plating.
Next, he added a couple of patterns to the surface of the blade using electricity and salt water.
I made the handle of the saber out of beech and brass rivets. I also used epoxy resin. After drying and processing, I covered the surface of the handle with eco stain and wiped it with linseed oil.
The guard of the saber.
First, I cleaned the guard with a rust remover and also cleaned it with an iron brush. Next, I adjusted the joints and re-welded everything. After that, I sanded and added patterns to the surface, which I filled with 80% brass and also added copper plating elements, and then cleaned to create the old effect.
The scabbard of the saber.
I used wood to create the scabbard of the saber. The surface was covered with red velvet, decorated with paint and transparent varnish on the back. I made the accessories of the scabbard out of brass and polished them.
I hope you enjoyed this video of shamshir's restoration. Don't forget to share this restoration.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #shamshir #restoration
Пікірлер: 391
Always a good day when Alex gives us a new video!!! Cheers my friend!
@ScrewsAndTools
12 күн бұрын
Thank you so much!
Thank you for another classic video.
@ScrewsAndTools
12 күн бұрын
Hello, thank you for interest ^_^
There are four things that need to happen in every video. You say beep-beep. The cat curtain is shown. You drink tea. And something goes wrong to which you react in a totally chill manner.
@ScrewsAndTools
12 күн бұрын
that's right)))
Holy crap 😲!! You found a shashka with a flamberge blade 😲?! I'm surprised there's no markings, these were expensive swords to make. The color you added looks gorgeous. I'm glad you're still metal carving as well. You found a treasure with this one. It looks fantastic! This video has jumped into my top 3 favorites. ✨️🗡✨️👏
Огромное терпение нужно иметь! Это что-то! 😁😁😁
@user-lo5ml1do6u
11 күн бұрын
О! Основную работу "сделала" щавелевая кислота.😉
@ScrewsAndTools
9 күн бұрын
Еще бы она мне помогала бы с ножнами - цены бы ей не было бы
@KellaKrok
9 күн бұрын
@@ScrewsAndTools , точно) про это я и писала) А ещё и рукоять бы сама сделала,так вообще " бип-бип"!)))
Well regardless of what type of sword it is you did a remarkable job restoring it. Truly beautiful. Love Peggy and Tom
@ScrewsAndTools
9 күн бұрын
^_^ Greetings, thanks!!
interesting camera angles and close ups, 👍. I wonder if that copper plating won't turn green in time? But great colour decoration with oxides. The sabre looks like it was a curio from many decades ago and was left on a damp floor.
@ScrewsAndTools
12 күн бұрын
Hi! Thanks, in practice it shouldn't, because this way you can protect some parts from rust.
Какая необычная железка попала в твои руки) Работа потрясающая, как всегда. А вот дизайн вызывает вопросы, но в прочем дело вкуса. Спасибо за видео, Алекс!!!
@ScrewsAndTools
12 күн бұрын
Привет и я того же мнения) Спасибо!
I like how you saved the hilt with your skill!😁
Прекрасная работа! Дай бог вам здоровья и таких работ!
@ScrewsAndTools
12 күн бұрын
Благодарю!!
@user-sp7bg7nu9c
12 күн бұрын
@@ScrewsAndToolsпоздравляю к вам 2 раз попал фламберг .
@ScrewsAndTools
12 күн бұрын
ааа так вот оно как называется!
@user-sp7bg7nu9c
12 күн бұрын
@@ScrewsAndTools Тот кинжал "крис" тоже относится к данному типу. И фламберг -это вид клинка.
@ScrewsAndTools
12 күн бұрын
Ааа, да да. Было такое. А я почему-то помнил (но не вспомнил) что эта тема только двучурных европейских мечей
Золотые руки.восхищение.снято очень динамично.респект мастеру и оператору!!!
@ScrewsAndTools
9 күн бұрын
Работник, оператор, редактор и тот кто говорит Бип бип это один и тот же человек
Отличная работа!👍 Почему то предполагал, что при клепке именно в этом месте накладка рукояти может лопнуть. Продольные волокна дерева в этом месте самые короткие. Наверное для таких накладок лучше подойдет древесина со скрученными слоями. К примеру капы и сувели. берез, карагача и тд.
Чёрный или тёмно-зелёный цвет бархата смотрелся бы реалистичнее, чем красный.😮 Лайк.
@ScrewsAndTools
12 күн бұрын
Как я и писал - весь дизайн приятеля)
@user-jf7qp6eh3m
12 күн бұрын
@@ScrewsAndTools Я читал, просто свой взгляд написал. Красный как-то по детски смотрится.
Alex, this work is beautiful in every detail. Another masterpiece! Brgds from Brasil 🇧🇷. 👍💕🙏👏👏👏
@ScrewsAndTools
11 күн бұрын
Thank you!
That was so awesome it deserves three beeps. Thanks for sharing your work with us. 😎
@ScrewsAndTools
12 күн бұрын
Thanks)
As usual this was an amazing restoration, love how you inject your humour into the process. Again thank you for sharing your work, best wishes for the future from here in the UK.
@ScrewsAndTools
12 күн бұрын
Greetings and thank you so luch for interest!
Алекс доброго времени суток, только сегодня посмотрел Ваш ролик, у Вас золотые руки за клинок ни чего не скажу технология отработана на столько четко, что и добавить не чего, убитый клинок в Ваших руках превращается в реальное оружие, а вот Ваши ножны это просто класс , такая сложная конфигурация клинка и так хорошо сделаны, изделие после реализации Вашего творческого замысла смотрятся просто идеально , благодарю за ролик и отдельная благодарность за титры на русском языке. Привет из Владикавказа.
Вах какой сабля. Честно впервые такую вижу. Отличная работа жаль рубку не показал.
@ScrewsAndTools
12 күн бұрын
Я сам хотел, просили не точить вообще
Missed opportunity to write "The Rust is History" on that jar
My 6yo son says "I really like your videos and hope the letter I wrote you comes soon and I also made a picture for you". Cheers from Australia 🤠
@ScrewsAndTools
11 күн бұрын
^_^ Thanks!! Hello!
Amazing restoration! I love your work it’s always the best!
@ScrewsAndTools
12 күн бұрын
Thanks)
An amazing restoration job you did on the shamshir sword. I have never seen one like that before. You also made a new scabbard for it. That sword looks much better and I bet it cuts like a knife too. Excellent work you did on all of this.
@ScrewsAndTools
9 күн бұрын
Greetings! Thank you for kind feedback!
The most unique items you have, I love your channel. Thanks for the restoration❤
I really enjoyed the chemistry used to create a flame effect. I was able to identify a few reagents but the clear solutions had me guessing.
@ScrewsAndTools
9 күн бұрын
Hello! Thank you. So cheap and easy ingridients. Ordinary battery acid, distilled water and copper sulfate
Отличное восстановление истории. Надеюсь приятель не только " спасибо!" сказал....
@ScrewsAndTools
11 күн бұрын
Я старюсь помогать не требуя взамен ничего. Спасибо за отзыв
WOW how much work went in to all of that and so glad to see no teat time has come on this one
Hello Alex, once again you have outdone yourself! The care and detail you go to is amazing! I especially like the fire on the blade! And the scabbard is just beautiful! Thank you for another great video! All the very best to You and Yours from Brian in Southern California
@ScrewsAndTools
9 күн бұрын
Hello Brian! Yes, there were a lot of new technical "tricks" in this video. I did it for the first time)
Roadrunner you made a awesome job of that beautiful sword the brass work really brings it all together nicely till next time take care my friend 😊😊😊👍👍👍♥️
It is always a great pleasure to watch your videos. Thank you so much for a relaxant evening.
@ScrewsAndTools
9 күн бұрын
Thanks!!
Спасибо Алекс за прекрасную работу, за кропотливый труд. За то что не боишся браться за такие проекты в которых как я понимаю не профи. Но таким как я ты даёшь уверенность в себе и глядя на твои работы я и мне подобные становятся более уверенными в себе. И спасибо за ещё один познавательный вечер!,
@ScrewsAndTools
12 күн бұрын
Благодарю за внимание и понимание. ^_^
@natteft6593
10 күн бұрын
а где реставрация?
@user-vt7ou8oh4e
8 күн бұрын
@@natteft6593 Норм всё. Просмотры сделал. А то, что форму запорол, гарду на эдс, и т. д....ценителей то мало. Зато: "Смотри большой ножик!...Я сделяль")))
I have no words to say how beautiful your work was. As we say here in Brazil: YOU KILLED IT! Congratulations .
Irmão, seu trabalho é maravilhoso! É a melhor definição de arte. A melhor definição de artesanato! Parabéns!
Now that--is one hell of a blade! Wow! The scabard was completly different than what I expected and it was gorgeous! Alex you are amazing my friend! Stay Safe and Healthy! Bob and Teresa
@ScrewsAndTools
9 күн бұрын
Thank you! How are you? Spring has come?))
Есть подозрение, что это не только фламберг, но и мог быть зульфакар. Обломаный кончик мог быть и раздвоенным!
@ScrewsAndTools
12 күн бұрын
Вот этого не могу подтвердить, впервые вижу такую штуку) А флаберг получается это тип лезвия, а я все думал как бы назвать))
@oleg_konovalov
12 күн бұрын
@@ScrewsAndToolsда, фламберг - это клинок с волнистым, "пламенеющим" (от flamme (нем.) - пламя) лезвием.
@oleg_konovalov
12 күн бұрын
Точно, возможно и так.
@ScrewsAndTools
9 күн бұрын
Все, теперь буду знать)
@oleg_konovalov
9 күн бұрын
@@ScrewsAndTools 👍😉
nice to meet you again. You did a great job, it took a lot of work. Great restoration job you did on it. It looks nicer now, much nicer. Thank you for another classic video.
@ScrewsAndTools
9 күн бұрын
Hello! Thank for interest and feedback!
Bout did a spit take when Alex the Kid showed up 😂
As always, I enjoy watching your videos. Thank you for sharing this art with us.❤
@ScrewsAndTools
9 күн бұрын
Thanks!!
@gengen-vx8li
9 күн бұрын
@@ScrewsAndTools You very welcome. :)
Вначале подумал, что так равчина изъела, учусь и познаю на Ваших роликах, спасибо огромное за труд и что делитесь знаниями.
@ScrewsAndTools
12 күн бұрын
Вот это да) Приятно читать, хотя я сам учусь, но рад если кому-то помогаю
@edgor3224
11 күн бұрын
@@ScrewsAndTools огромное спасибо за канал, Вы расширяете кругозор, Вы учите обработке материалов, Вы учите терпению последовательности, преодолении ошибок, их исправлению, спасибо огромное!!!
@ScrewsAndTools
9 күн бұрын
Спасибо! Сегодня, точнее по-моему вчера.. Обнаружил очень интересный (не особо) экономный способ очистки металла старого. Скоро поделюсь.
That is a beautiful sword. You do excellent work. 👍👍
Примите моё уважение, настоящий мастер 👍💪👏
@ScrewsAndTools
5 күн бұрын
Спасибо, но я всего лишь учусь пока
@user-xz8rb2kx1s
5 күн бұрын
@@ScrewsAndTools далеко пойдёте значит)
Sword turned out beautiful Alex,will make a fine addition to the museum.as always your talent shines through.any time soon will you be going on a adventure to local craft fair,flea market,art show.just great video as always,sir what can you not do.just continue on doing your thing.😎😎😎👍👍👍
Excellent! Really enjoyed the resurrection of the saber.
That sword looked so good. Another fine job on your restoration.
@ScrewsAndTools
12 күн бұрын
Thank you!) ^_^
Sempre se superando... parabéns... saudações do Brasil
@ScrewsAndTools
12 күн бұрын
Obrigado pelo feedback.
может оставлять меньше длины медной трубки, по моему опыту до 3 сантиметров длины трубки нужно оставлять не более 1 миллиметра, то есть 0,5 мм на сторону, а также другой вариант, который точно не приведёт к трещине в дереве, такой же обжиг, как ты делаешь, когда из медной пластины создаёшь кольцо для ножен. прости что советую, но ведь ни разу не видел такого совета. 68 лайк мой. Очень нравятся твои работы.
@ScrewsAndTools
12 күн бұрын
Привет! Наоборот, я всегда рад критике адекватной и советом, т.к. я всего лишь учусь. Спасибо! А я вот я оставил на сей раз где-то по 5 наверное мм и... благо пронесло и удалось сохранить рукоять целой!
Браво мастер! Отличная работа!
@ScrewsAndTools
12 күн бұрын
Благодарю!
Спасибо вам большое за атмосферное видео! Что сохраняете частички истории!
Beautiful work !!! You are rare, man. Indeed !
Результат отличный и просто превосходно,браво!
I love what you've Made with this shamshir ❤❤❤
@ScrewsAndTools
2 күн бұрын
Thank you so much!
I've never seen that design blade. Very interesting. Awesome restoration ❤
@ScrewsAndTools
10 күн бұрын
Thanks ^_^
believe that it is an Indian made blade, very good job on the work you did
I want this! I'd love to have one in my collection!
@ScrewsAndTools
11 күн бұрын
Thanks ^_^
Another awesome restoration. Thanks!
Очень познавательное видео. Работа проделанная огромная и результат классный. Спасибо Алекс за видос, лайкаю.
@ScrewsAndTools
8 күн бұрын
Спасибо
Your jar should say The RUST is History! 😊
The blue crystal sorcery on that blade was a nice surprise ;)
Браво Мастер!🤝 Отличная работа 👍 наблюдать за твоей работой это особый вид отдыха!
Hello Alex🤓 Another beatiful restoration 👍 Congratulations 👏Greetings from Belgium 'friend' 😉🇧🇪👋🇬🇪
@ScrewsAndTools
12 күн бұрын
Hey Zou! You here - good, How are you? Thanks for feedback ^_^
@zou6492
12 күн бұрын
I'm fine.. Thanks, and you😊
@ScrewsAndTools
9 күн бұрын
I'm fine too, start working with new interesting project.)) Will share soon))
Not only a fine weapons restorer but a keen gardener? I noticed your "green fingers". lol
Wow 😲😲😲😲 that thing is crazy!!!
Приятель, конечно, не щадит тебя =) Отличная работа, спасибо большое за проделанную работу. Для нас это 23 приятные минуты, а для автора - месяцы тяжёлого и нервного труда.
@ScrewsAndTools
11 күн бұрын
Да за кадром там другая житуха))))
THAT WAS GREAT JUST GREAT , TAKE CARE MY FRIEND
Absolutely beautiful work as always Alex! Great job and an incredible result!
If you show how many ml of liquids you take, then write at the same time what kind of liquids they are 😅. And it was very interesting to watch the revival of the saber!
EXCELENTE TRABAJO. CADA DIA MEJOR
Excellent work!
Incredible!!😮
Спасибо. Хорошая работа. Сабля вышла в стиле Ар-деко)
@ScrewsAndTools
12 күн бұрын
))))) гламурненько))
You are a very skilled man, glad to see you back with new content. Also best of look with the cooking show!
@ScrewsAndTools
9 күн бұрын
Thanks a lot, I'm just learning
@justinwade9026
9 күн бұрын
@@ScrewsAndTools , take out the 'Just', we are all learning... but you are also teaching.
As always, great work!!!
Great peice of work! Nice looking sword as well
@ScrewsAndTools
10 күн бұрын
Thank you mate ^_^
Лови лайфхак! Когда подсыпаешь порошки, для достижения полного магического эффекта, нужно одеть островерхую шляпу и подхохатывать! Не благодари...
@oleg_konovalov
12 күн бұрын
😂👍👍👍
@ScrewsAndTools
12 күн бұрын
О это будет что-то из фентези))
Watching from Liverpool uk fantastic show .
@ScrewsAndTools
10 күн бұрын
Thank you so much!!
Спасибо, мастер! Удачи!
с руками и юмором все в порядке
Very cool scabbard sir you did really well on this project!!!
Beautiful work. You did it well 👏👏
@ScrewsAndTools
3 күн бұрын
Thank you!
great job love the work you do
00:01:35 отличное применение для ночного горшка!!😆🤣 Ждем следующее видео про его реставрацию!!😅😂🤣
@ScrewsAndTools
9 күн бұрын
Нет уж, он и так служит верой и правдой))
Работа очень интересная! Всем бы такими криворукими быть! я бы, точно, не отказался?) Спасибо большое!)
Nice to see a red scabbard! What was that when you applied somehing to the edges? I do not mind shinny blades, but not so polished that they blind me. I knew the scabbard would have to be roomy to fit the curb and edges.
@ScrewsAndTools
12 күн бұрын
Hi, I tried to give a fiery look as much as possible due to such an unusual blade. Thanks
Good job, as always, the beker you use is at least 25 years old, made in GDR 👍🤣
Звук стали офигенный... Звучит... Но клинок с такой формой вижу в первый раз...
Alex I’m starting to believe there’s nothing you can’t do amazing work on this sword so want you to restore my fathers knife
@ScrewsAndTools
12 күн бұрын
Thank you, sometimes I don't know how I do it myself))
niesamowite :) kolejne pozdrowienia z Polski cały czas oglądam każdy Twój film POZDRAWIAM i czekam na więcej :)
@ScrewsAndTools
7 күн бұрын
Bardzo dziękuję!
Coloring the blade to complement the flame edge was very cool. I recognized the blue copper sulfate you used at the end to deposit copper on the steel but not the other red, green, brown and off-white materials you used earlier to prepare the blade. Can you tell us what they were, or is it your secret? I won’t hold it against you if you don’t want to tell us. Anyway, another exciting resurrection of a poor, sad “piece of junk” that has a new life being admired in a museum. Thanks, and beep beep!
@ScrewsAndTools
9 күн бұрын
Hi! Thank you so much for your interest and feedback. I like to read your comments. No secrets, it's simple. I'm here to share my experience. So: for polishing steel, I use dry paste (for steel and for non-ferrous metals), (green for ferrous metals and red for metal) to make them softer, I used kerosene. To gradate the sanding, I used purified sand and hot water to make one mix. I am currently working on a project and have found a more interesting way. (but not fully economic) but so effective. I'll share it with you soon. Ask questions - I will always be happy to answer. If I answer later, I'm sorry, I won't have time physically. beeP)!
Excellente Mi Amigo. Buen Trabajo
Przepięknie jest to odrestaurowany pozdrawiam serdecznie 👍👍👍👍👍👍👍
Great job Alex always 🇻🇪👏👍🏻🤗
Another great video - thanks! I am still wondering what is this yellow liquid which you use to remove rust. You always tell us that you clean/neutralize afterwards with Water+Soda - but what do you use before?
@ScrewsAndTools
9 күн бұрын
Hi, thanks for the feedback! I used cheap rust remover, name is "Yeetis" in yellow plastic bottle (550ml and 2L).
Top job mate
Incredible
@ScrewsAndTools
11 күн бұрын
Thanks!
Great job
Where do you find these things ? I'm always amazed !
@ScrewsAndTools
9 күн бұрын
This is a request from a friend, he gave it to me for restoration. The item has already been in his museum for a couple of days
Восхитительно!!!!
Fantastic restoration. So are you professional carpenter??
@ScrewsAndTools
11 күн бұрын
Hi, I have studied everything I can (you can see on my channel), I am learning the trial and error method and do not hesitate to share it with you. Thanks for the feedback
Very good! I'm from Americana SP Brasil.
Nice work as always.
Просто божественный фламберг🎉