Restoration of RUINED Cossack Shashka - My Worst Idea to RESTORE This
Тәжірибелік нұсқаулар және стиль
Hello folks! Today I will show you a great restoration of the cossack shashka of the sample of 1881. The condition is terrible! When I first saw this sword , I asked, what is there to restore? But as practice shows, the world is waiting for new achievements from me and I am starting this unreal restoration!
The first step is to weld rotten metal. But how?! There the thickness at the edges was less than 0.5 mm… It took a huge amount of time. I started to brew the hole, then sanded it, then again, and so on indefinitely.
After welding, I moved on to cleaning the blade. But very carefully, because it is thin and I could create new problems for myself-tasks.
I cleaned the dirtiest places with sand at low pressure. Further, to hide the irregularities after welding, I filled everything with tin-lead alloy and sanded the surface with sandpaper.
It looks much better! The handle of the saber! This type of shashka sword has a kind of handle where many factors need to be taken into account. I made it out of wood, as it was in the original.
After cutting out the handle, I boiled it in oil, dried it and covered it with a special protective varnish for wood. Now this handle will definitely live for more than 100 years.
I made the scabbard for the saber out of wood and pasted it with thin genuine leather. I received the original fittings (details) from my friend for scabbard.
They were found and brought to me directly from the ground, where the parts had been lying for more than 100 years. I cleaned all the parts for the scabbard with sandblasting. All the irregularities and holes were soldered, but not all in some places the metal was extremely thin and failed. Iron parts were coated with iron oxide, (so that they no longer rust) dried with a hairdryer and applied graphite grease.
I leveled the brass parts with wood and a mallet, drilled the old rusty and oxidized screws, substituted new ones.
I successfully installed all the details on the scabbard, added a bayonet from the Mosin system of the old model and now I have a complete set of the Cossack shashka of 1881 year together with the bayonet. The item was transferred to the museum.
Don't forget to share this video, it will take you a couple of seconds. Thanks for your attention!
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #shashka #restoration
Пікірлер: 375
Хвостовик, который вы выровняли - на самом деле должен быть изогнут. В целом рукоять на этой шашке и должна иметь некоторый изгиб..))
@ScrewsAndTools
8 ай бұрын
Значит фурнитура из более поздней версии. Я это сразу подметил ибо там в начале "гард" должена быть другая ширина.
@user-ul7mt4so4r
4 ай бұрын
На оригинальной шашке хвостовик не выпрямишь, если только клинок не отпушен был. На новодельных их легко гнуть.
@user-ku2oe4mg8b
4 ай бұрын
@@user-ul7mt4so4r не согласен. У меня есть три оригинальных козачьих шашки 1889г, 1902г и 1927г. Шашки не закалены до такого состояния, чтобы нельзя было что-то выправить. Твёрдость оригинальных шашек была в пределах 54-57 HRC - но измерялась в других еденицах.
@user-ul7mt4so4r
4 ай бұрын
@@user-ku2oe4mg8b , привет. Разбирал 2 оригинальные обр.1881 гг казачьи шашки (годы выпуска 1904 и 1907), а также обр.1927 (1944 ). Пытался проверить и изменить угол наклона хвостовика- бесполезно их профиль ( это как балка с измененным сечением )не возволял это слелать. Хотя один из клинков был в плоскости согнут. Твердость 43-47 ед, для сравнения твердость напильник 62-67 ед.. Если бы можно было хвост гнуть, то при ударах шашкой она бы повреждалась, что происходит с новодельными суверирными шашками. На одном из клинков, вроде кск обр.1881 поднятых из копа, после очистки решил поставить клейма года на пяте и хвосте , но клеймер практически следа не оставил. Хотя проищводители были в РИА и РККА разные, может и материалы и качество такое. Успехов и с наступающим новым 2024 годом.
@user-ul7mt4so4r
2 ай бұрын
На обр.1881 изгиб хвостовика шашки незначительный, а вот на обр.1927 гораздо больше
I wouldn't even imagine sitting in one place & curve woods by hand. Sometimes we forget our place due to the comfort we r living in. Mad props to u for another trial.
Every time I think your work can't get more beautiful, you prove me wrong! I love how the handle turned out
@ScrewsAndTools
8 ай бұрын
Thank you)
С удовольствием смотрю Ваши ролики. Ваше мастерство и самоирония, это признаки мудрого и доброго человека.
@ScrewsAndTools
7 ай бұрын
Благодарю за интерес и внимание!
Once, again, your patience and steadfast work ethic have produced a piece of historic art, from the wreckage of time.
Шашка казачья донская степовая рядового состава. Мастеру уважение за труд.
Шикарная реставрация шашки! Удачи тебе Мастер!
It is always great fun to see you work!!!
It's a great restoration you can be very proud of, and your work will be forever in a museum ... congratulations!
@ScrewsAndTools
8 ай бұрын
Thank you!
Not only you became a master woodworker, you also got enviable biceps! Stay sharp too, man! Cheers from Italy!
@ScrewsAndTools
8 ай бұрын
Thanks)))
Great job Alex, what a beautiful restoration!
Потрясающая работа и великолепное чувство юмора Мастера. Ролики приносят истинное удовольствие. БлагоДарю !!!
@ScrewsAndTools
5 ай бұрын
Благодарю!!
So beautiful indeed! Thank you 🙏🏼
Usted, mi estimado Señor, debe ser de los pocos youtubers que pueden hacer un video sin hablar (casi) por media hora conservando el interés hasta el fin. Muchas gracias por eso; y por favor, no se ahogue con te por que lo necesitamos para muchos proyectos mas. Hasta la proxima restauración.🛠🗡👍😀
@ScrewsAndTools
8 ай бұрын
¡Buenos días! Muchas gracias por sus comentarios e interés!
thank you! i really enjoyed your video again, especially the advice for smiling. on the result of this project you really can see the hours of work you spend to restore this weapon. please keep on making this! greetings ,paul
@ScrewsAndTools
8 ай бұрын
Hello Paul! Thank you for your interest and feedback) I will!
Another museum piece for the wall, keep em coming 👍️
Another beauty, and with your 'trade mark' light heartedness. Thank you again for sharing !
@ScrewsAndTools
8 ай бұрын
Thank you!!
Super job it looks really lovely and awesome. 👍
Спасибо за отличные видео! Всегда жду и смотрю с удовольствием!!!!
Amazing museum piece you saved!
Amazing skill and effort you put into all of your work!
@ScrewsAndTools
8 ай бұрын
Thank you!
Excellent work as always. The sword is reborn.
@ScrewsAndTools
8 ай бұрын
Thank you!)
This was a great video despite all of the setbacks. As in some of these it really showcases your perseverance and ingenuity.
@ScrewsAndTools
8 ай бұрын
^_^ thanks
Good one! Glad to see that everything went so smoothly 😂
Truly awesome!
Beautiful!
Master at work! 👌
An absolute masterpiece, my friend! Beep! Beep! 👍
Спасибо, как, всегда интереснее, и интереснее!!!!!!!
great restoration!! it looks amazing. I hope to see photos of it at the museum one day.
@ScrewsAndTools
8 ай бұрын
Специально под штык для транспортировки, т.к. это носили служащие из рядового или сержантского состава.
Thank you for this restoration. It is beautiful. Thank you also for protecting our eyes when welding. Thank you also for showing us that things can go wrong or not ideally sometimes but we need to keep trying our best. I hope one day to make a scabbard that holds my blade in place like yours do.
@ScrewsAndTools
8 ай бұрын
Hi! Thank you for your interest and feedback!
Шикарна робота Лайк і БІБІП!!!
You have been working out! Looking good my friend.
awful lot of work to rescue that one, come out much better than I thought it might, well done
Great job Alex. I watched the welding bit 3x. 🤣🤣. I also liked how you did the handle, very clever! Thank you 🙂
@ScrewsAndTools
8 ай бұрын
Thanks
Beautiful ❤
Yet another truly awesome job!! I look forward to all of your videos! Thank you for sharing the wonderful work you do with the rest of the world.
I like your videos bc you don't overwork the antiques. Some Restaurateur overwork it and the objects loses the authenticity. U r great man, keep goin
@ScrewsAndTools
7 ай бұрын
Thank you so much!
Однозначно лайк! Отличная работа!
A very good restoration! Thanks for sharing!
@ScrewsAndTools
3 ай бұрын
Thanks!
Beautiful restoration mister well done
It's hard to imagine how much work you put into this project! I respect you, thank you!✊️👍
This is one of your best projects on your channel. Wonderful work, especially with the welding. It's difficult to weld a thin piece. Well done.
Супер! Получилась отличная вещь! 👍
Great job!
I love this guy and always does an excellent job:)
@ScrewsAndTools
7 ай бұрын
Thank you for feedback!
@zachwood8095
7 ай бұрын
@@ScrewsAndTools you're very welcome 🤗
Beepbeep Alex 🤓 my friend.... Amazing restoration 👍 Congratulations 👏 and Friendships from Belgium 😉🇧🇪👋🇬🇪
@ScrewsAndTools
8 ай бұрын
Thanks Zou)
Привет мой дорогой. Блестящая ресторация, а латунные детали иштыкнож было вишенка на торте🙂👍👍👍👌👏
@ScrewsAndTools
8 ай бұрын
Благодарю!
Awesome always cool stuff always thanks 😎
Outstanding workmanship 👍👍
@ScrewsAndTools
8 ай бұрын
Thank you!
Здравствуйте Алекс. Непростая работа. Ну в общем как и многие проекты у вас. Отлично смотрится шашка. Все получилось.
@ScrewsAndTools
8 ай бұрын
Спасибо!
Բարև Հայաստանից 🇦🇲
Здравствуйте! Вы молодчина!!! Афигенная работа!! Столько терпения.. Как говорится респект и уважуха!!!!
@ScrewsAndTools
8 ай бұрын
Спасибо!
Looks great and I love the scabbed you did an excellent job making it!!! I enjoyed your video and I gave it a Thumbs Up
@ScrewsAndTools
8 ай бұрын
Hello! Thank you for feedback! ^_^
Кропотливая но интересная работа. Бип бип рулит. Алекс спасибо за видос.
Как всегда отличная работа! Отдельное спасибо за позитив!😊
Finally got around to watching this. I also had a manual printed ons shashka training so looks like I'm being pushed in that direction
Unbelievable! Your level of craftsmanship just gets better and better.
І дякую за гідний проект)дай боже Вам сил і надалі робити Вашу роботу та гадихати інших
@ScrewsAndTools
8 ай бұрын
Дякую за інтерес!
Похоже это один из самых трудо и время затратных проектов.Время и коррозия не щадят металл.Спасибо за ваши труды.
good work - again! Have you tried glass beads in the grit cleaner? It might be less damaging to the thin metal and brass.
@ScrewsAndTools
8 ай бұрын
Hi! thanks for the feedback. Yes, I've heard about it, but they don't sell it in my city (
i never seen a sword with a bayonette attachment before great work
@ScrewsAndTools
8 ай бұрын
Thanks!
Офигенная работа!!!
Тяжёлый труд, результат порадовал 👍
Thank you for helping me sleep 😊
Отличная работа.👍
Вот это Класс!!!! Золотые руки Мастера!!! 😊
@ScrewsAndTools
8 ай бұрын
Я только учусь)
Gosciu .... Naprawdę , podziwiam Cie i szanuję . U nas powiedzielibyśmy.....zlota raczka. Życzę ci powodzenia , masz serce , do tej pracy. Musisz być dobrym człowiekiem , ratujac , kawal historii. Pozdrawiam bracie , serdecznie.👍☕🕊️
The bayonet holder on the scabbard is pretty cool
Beautiful!!
@ScrewsAndTools
Ай бұрын
Thanks!
Отличная работа! Удачи тебе
@ScrewsAndTools
8 ай бұрын
Спасибо!
Juajjaua exelente trabajo amigo.❤🎉🎉🤪🇺🇾💪
Привет с Кубани! Отличная работа!
Отличная работа и как всегда несмотря ни на что на позитиве!! Браво!!
@ScrewsAndTools
8 ай бұрын
Спасибо!
wow! Amazing work, thought that was a dead sword! Was worried the tang was going to snap on you though...
@ScrewsAndTools
8 ай бұрын
))) well, that's was long story but I really happy to show you it in final version. Thanks for interest
Молодец как всегда на высоте 👍👍👍🤙
Вот это работа кропотливая!!!!! Просто класс!!!
Four!!! Hours!!! Grinding!!! Alone!!! Holy!!!
Здравствуйте Алекс, спасибо, интересный проект! Два месяца за тридцать минут, круто. Я не представляю сколько весят исходники и сколько время занимает монтаж :)
@ScrewsAndTools
8 ай бұрын
Привет, благодарю! Ой даже не спрашивайте, а сколько осталось за кадром))))
к сожалению функции "жирный лайк" не предусмотрено, выразить свое восхищение объёмом проделанной работы могу только стандартным образом! Вы молодец!
@ScrewsAndTools
4 ай бұрын
Спасибо!
Молодец Алекс 👍 классно получилось в итоге. Хотя и растянул реставрацию на 2месяца😏 👍👍👍🤝 😆😆😆 УЛЫБАЕМСЯ
@ScrewsAndTools
8 ай бұрын
Спасибо)
Большая работа!👍
I thought the blade was beyond redemption, but you somehow helped it. I could not have.
It was a lot of work. You did well Amigo.
By far my favorite handle…it was awesome to see the hand work…also I like the longer vid! If you make merch I want the first curtain kitty Hawaiian shirt… keep up the good work! Beep beep
@ScrewsAndTools
8 ай бұрын
))))Thanks
Алекс как всегда красавчик!!!! на высоте Кавказких гор!!!
@ScrewsAndTools
8 ай бұрын
ого!)) Благодарю!
Man, amazing wood carving work with the handle. Remarkable video as always. Beep beep.
@ScrewsAndTools
8 ай бұрын
Thank you))
Красота!
Прекрасная работа, классная драгунка
@ScrewsAndTools
8 ай бұрын
Драгнука с душкой всегда) Это строевая казачья
@vadimlysov6467
8 ай бұрын
@@ScrewsAndTools ножны с держателями для штыка характерны как раз для конной пехоты
@ScrewsAndTools
8 ай бұрын
У конных были драгунки с такими же крепежами@@vadimlysov6467
11:18 best part of the whole video 😂😂😂 jk man beautiful work!!
@ScrewsAndTools
8 ай бұрын
Haha)))
Очень нравиться твоя работа, спасибо.
@ScrewsAndTools
7 ай бұрын
Спасибо!
@BrayanOKonner820
7 ай бұрын
@@ScrewsAndTools и к тому же, ты весёлый и классный 😁
14:40 ya te habías ganado mi like antes de hacer esto
Essa foi difícil. Mas as suas soluções são sempre fantásticas. Parabéns!
WOW GREAT JOB ! THE COSSACKS ARE OR WERE BAD MOTHERS , YOU TAKE CARE BROTHER
That was very impressive..what age would the blade be ??👍🤔
@ScrewsAndTools
8 ай бұрын
The minimum age of the blade is ~ 150 years
Молодец, терпеливый ты Алекс!!!
@ScrewsAndTools
7 ай бұрын
Дорогу осилит идущий ^_^
I knew you were gonna come through and restore it to better shape than it was in before. Beep! Beep🗡️👍!!
@ScrewsAndTools
8 ай бұрын
Hello! Glad to read!, so kindly, thanks ^_^
@CJ_7519
8 ай бұрын
@@ScrewsAndTools, you're welcome.
that GN dude would be also glad that the sword he used be restored
You are the best 🥳🥳🥳👍🏻👍🏻👍🏻
Очень интересный комплект, признаться такого "содружества" раньше не видел,а на позитиве ,да с юмором работа спорится! 😂👍👌