Replacing Struts on 2013 Hyundai Elantra
If you do not purchase them in a set ensure you have both left and right. Ordering online may result in purchasing two struts of the same side.
Detach the brake hose bracket from the strut and the ABS sensor. Remove the strut to knuckle nuts and separate the steering knuckle. Prior to removing the top three screws of the strut you must remove the cowl cover.
Warning: disassembling a strut is potentially dangerous and utmost attention must be directed to the job or serious injury may result. Us only high quality spring compressor.
Пікірлер: 67
You can bring the strut up to the bolt holes on top before it's attached to the knuckle so you don't have to lift the whole brake assembly with one hand while tightening the nuts on top.
Best video iv seen on doing struts. Thanks for making it. Saved slot of money on labor. Video was great in detail.
Great video! Looking forward to replacing ours and I feel absolutely confident I'll be able to complete it with this DIY
Perfect 👌.. this is an exact guide to how to change a front struts for any car in general
That's not a strut knuckle that's a sway bar link. Nice job!
You saved me a bunch of stress...will be replacing mine soon. Thanks
good stuff man, thanks for posting this
good diy sir! Kudos to you for changing this on a snowy day lol.
Great video! Thank-you!!
Awesome video. Thank You.
Excellent video! Well explained. Thanks so much.
@23sapper
3 жыл бұрын
You’re welcome
Great job
Perfect Guide !!!!
Thanks. I just did this on mine today. To note, I got KYB Excel-G struts which were taller than the OEM ones, so the length of the new completed strut assembly was longer than the OEM one.
@dirtbagthings
3 жыл бұрын
I've got to do my fronts with those kyb you didn't have any reassembly issues did you?
@place_desjardins
3 жыл бұрын
@@dirtbagthings No issues with reassembly. Using the same springs, the car's wheel gap distance stayed the same after installation.
@dirtbagthings
3 жыл бұрын
@@place_desjardins awesome thanks I did the back with kyb and a bar and it's been a dream
Lol your supposed to connect the top 3 nuts first and then attach the two bottom bolts for reinstallation.... But thankfully you had the strength 👍🏼
Thanks.
When installing the strut assembly back into the car, isn’t it best to support the front control arm with a floor jack for safety?
Last step is get an alignment done
Great explanation! What kind of struct you bought?
@odibryant92
5 жыл бұрын
Those are MONROE. I have purchased rear struts for my 2013 Hyundai Elantra Limited and love Monroe. The fronts struts are McPherson.
j'adore sa
Where did you place your jack stand? do you have a pic or video on that? The hardest part of these cars is finding a safe place to jack / jack stand. I know the notches in the pinch welds work, but I can't use that for both the jack point and stand point simultaneously.
@23sapper
5 жыл бұрын
I used a floor jack, lifted one side, placed a jack stand, then did the same to the other side.
@christopherhendricks4369
3 жыл бұрын
I don't trust those pinch welds at all. Maybe for jacking up the car with the hydraulic jack but I support it by the suffrage front on jack stands
@troytsapatolis6657
2 жыл бұрын
Put the jack on the frame of the car
Do you know if a 2012 Elantra would be any different than this?
@23sapper
6 жыл бұрын
It’s the same. Only the 2011and below have some slight differences
What shocks should I buy for my 2013 Hyundai elantra, I have heard That KYB is a really good brand for the rear but I need some for the front as well... any suggestions?
@23sapper
4 жыл бұрын
That’s a good brand but I would recommend Monroe, maybe $5-10 more but better quality, but KTB will be fine.
@TEXASBABYDOLL13
4 жыл бұрын
@@23sapper Okay Thank you so much :)
Very useful vid! Are those Monroe struts?
@23sapper
3 жыл бұрын
Yes!
Using 19 mm get bolt out but it seems stuck. What do you recommend. I even use stuff that helps stuff get lose.
@23sapper
3 жыл бұрын
PB Blaster works well to loosen bolts. Sometimes I’ve had bolts so tight the it took a few hours of PB blaster soaking the bolt.
Did you notice that on the new strut the brake hose mounting tab lip is at the bottom, whereas the stock is on top? Is that the Monroe?
@23sapper
4 жыл бұрын
Monroe, yes.
Why you change it ...what is the problem with the old one ? I have same car and there is noise from front wheels and i dont know what is the problem ..
@23sapper
5 жыл бұрын
My tires had an uneven wear which is a sign of bad struts.
Hi all. I have a 2013 Elantra with 65,000. Question please. How do I know when the struts and shocks need replacement?
@SadComicLaughs
2 ай бұрын
obviously this question doesn't matter to you being 2 years old but for other people wondering if you are hitting bumps and you hear a loud metal clank or you think any small bump is feeling way to much bump (bounce) when you go over it... you could have a failing shock absorber... it wont always be both when it happens... my left side failed first on my car and it was pretty noticeable
Hey man, tried doing this job today and got all the way down to the sway bar link just not wanting to come out at the top. is it just stuck?
@SadComicLaughs
2 ай бұрын
im sure you figured it out but for others in the future sway link bar nuts can be a pain in the ass ... some you can grab behind the nut with a 16mm or 17mm crescent wrench ... this keeps the bolt from spinning while taking off the nut... some have a alan wrench cut out in the center of the bolt for you to lock the bolt from spinning but obviously you can't use a socket than to get the nut off you have to use an open end wrench or crescent and that presents more problems considering these bolts are on with a ton of torque.
i love all the ribbing this guy got for calling a Hyundai a Honda but at least he saved some ching-ching to take his lady out for some fine dinner, great job, yeah you could've done the job differently i like to watch 5-10 videos on the same subject just to see how they do the job and take the best id3as from each one...my hats off to you SIR!!
@23sapper
5 жыл бұрын
Thx bro! I’ve been hit in the head too many times so when I get to talking sometimes I mix up words like Honda and Hyundai!
What's the price on this job? Both sides? Will a strut or stabilizer cause a rattle noise on the elantra suspension?
@23sapper
3 жыл бұрын
You may need to replace the bushings as seen at this link www.carid.com/2012-hyundai-elantra-control-arm-bushings-hardware/ Or the lower control arm as seen at this link images.app.goo.gl/pN3rZLDLvGmnzbuV9
@23sapper
3 жыл бұрын
Bushings usually get rid of rattling noise. with coil springs and struts I think it’s about $175 a set, but with just struts, like $60-70
Does it matter if I have a GT? I can use the same strut as a regular Elantra correct?
@23sapper
5 жыл бұрын
They are the same.
@victoriagoodwin6915
5 жыл бұрын
Thank you!!
Does this change will stabilize the rear end of the car
@23sapper
4 жыл бұрын
New rear shocks should.
@d_p_m9319
4 жыл бұрын
And those are super easy. Take two bolts out - put two bolts in. No compressing on these.
0:00 he looks and talks so intense 🙂🙃 R E L A X
@23sapper
Жыл бұрын
Thanks for the compliment.
You missed the white soft rubber on the top of the strut
@23sapper
5 жыл бұрын
Thx
That's a nice Honda bro? Where can I buy one of these hondas? 🤣
Hyundai does not equal Honda. Lol. Honda Elantra. Bro. Cmon
@23sapper
5 жыл бұрын
I was waiting for someone to notice
@odibryant92
5 жыл бұрын
I noticed it too. just pure stupidity these kids now a days
@reg83ny
5 жыл бұрын
He's too busy modeling & posing lol
HONDA ELANTRA 🤪