How to Replace Front Strut and Spring Assembly 2011-2016 Hyundai Elantra
Автокөліктер мен көлік құралдары
Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ib/1ASTS01330
This video shows you how to install a front strut and spring assembly on your 2011-2016 Hyundai Elantra. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra
Tools you will need:
• 16mm Wrench
• 17mm Wrench 1aau.to/tMj/1AXAA00010
• 12mm Socket 1aau.to/tbtd/1AXAA00015
• 14mm Socket 1aau.to/tbtd/1AXAA00015
• 18mm Socket 1aau.to/t73/1AXAA00043
• 19mm Socket 1aau.to/t73/1AXAA00043
• 21mm Socket 1aau.to/t73/1AXAA00043
• Trim Tool Set 1aau.to/tS8/1AXXX00006
• Ratchet 1aau.to/taYN/1AXAA00016
• Socket Extensions 1aau.to/tbtd/1AXAA00015
• Torque Wrench 1aau.to/taeX/1AXAA00044
• Gloves 1aau.to/tvL/1AXSS00048
• Safety Glasses 1aau.to/tqg/1AXAA00343
• Floor Jack 1aau.to/tJS/1AXAA00068
• Jack Stands 1aau.to/tGC/1AXAA00065
• Pick 1aau.to/tA8/1AXAA00037
• Rubber Mallet 1aau.to/teT/1AXAA00413
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 32
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
These are the kind of videos that are priceless. You're saving me thousands of dollars with these videos.
@TRQ
11 ай бұрын
+Thisnameisl33t Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts! 1aau.to/m/Shop-TRQ
Thanks for the guide! I can tell you had a hard time taking the sway bar link off because the strut and link are new in your demonstration, then the next step is the old strut 🤣. Always buy new links when you replace your struts, folks!
Yes!! Please keep doing these videos for 2013 Elantras!!!
Fantastic! One of the clearest how to videos I have ever watched. Definitely increased my confidence level significantly, Greatly appreciated!
Excellent, I have no idea that all process starts from the top. Very clear explanation. Thank you
Nice work! Easy to understand. Step by step precision. Very helpful information along the way!
Thank you so much for taking the time to make this video!
Looks like you did both sides? Both looked new from the top view under the hood…I was told that it is best to do both then get the vehicle aligned? excellent video!
You make great videos. Very helpful
Excellent video, so full of information!
Well done! Thank you very much for sharing.
19 mm 10 mm 17 mm wrench 14 mm socket 16 mm wrench
Thx I appreciate your work
Thanks job well done I love it when you tell me what tools l nerd
Thank you very well explained
Rotor went from rusty to a nice drilled and slotted in under a second.
please provide with torqe specs for all bolts
Good video
So does this mean if you replace the sprint and strut as one unit you won’t have to compress the spring?
Wow, good video..🤙
Is it the same for 2018? Thank u
3:25 13:32 So, is that nut 18 mm or 19mm? Thanks.
Can anyone confirm this part is safe? Trying to decide to go this rout or OEM
What are the torque values
Yes!!
It’s a good quality TRQ shocks?
Wheel alignment required after this?
@TRQ
7 ай бұрын
+@flyonawall6521 Yes, an alignment will be needed.
How bad does replacing struts mess up your alignment.
Anyone know the size of the push pins that secure the hood cowl? I broke mine taking the cowl off 🫤