The third movement isn't one I was aware of - I'll be sure to try it. Many thanks for recommending it, Sir - and for demonstrating it so ably! 🙂

@MadScientistOfMuscle

Жыл бұрын

you bet!

1:03 damn had me going lol my jaw dropped when he said he was gonna drop them from overhead

I'm excited to see they're holding up OK. I purchased them for my personal training business and I am excited to see how they hold up for me!

@MadScientistOfMuscle

Жыл бұрын

I'd be curious to see how they hold up for you!

@bestfitnessli

Жыл бұрын

@@MadScientistOfMuscle Ill be able to review them in a few months after some usage! Awesome vid

@codyfrancis4474

9 ай бұрын

@@bestfitnessliare they still holding up good ?

Great video !

@MadScientistOfMuscle

7 ай бұрын

thanks!

If you can’t lift without dropping your weights on the floor, you’re not ready for nice equipment and should lift weight you can handle. Great review!

@MadScientistOfMuscle

2 жыл бұрын

So true!

@casshernsins8333

2 жыл бұрын

Depends. If you’re going to or close to failure, I rather have my dumbbells drop resistant just in case I need to abort them. I’ve never drop my dumbbells but if im in a position that I need to drop them for my safety, I want them durable

@MadScientistOfMuscle

2 жыл бұрын

@@casshernsins8333 very good point

@potentatewags

Жыл бұрын

Even lifting to failure I've never dropped weights. I burned out my biceps, chest, etc, not my entire body. My other muscle groups take the burden of setting it down.

@ajc8923

Жыл бұрын

I’ve went to failure with db and can still easily transfer to my thighs and sit up and place them onto the ground. If you’re dropping or slamming them, you’re lifting too heavy of weights. You should still be able to control your lowering of the weights.

Never dropped a dumbbell, even on a heavy set i always make sure to set them on the floor slow and careful

@MadScientistOfMuscle

2 жыл бұрын

glad to hear it!

Awesome gym set up there, Nick! I was going to ask where you bought the rack and bar but I'm sure you've got a video on this. How high is the ceiling?

@MadScientistOfMuscle

2 жыл бұрын

Thanks! That rack is actually Body Solid - got it about 20 years ago now, at this point. Ceiling is 8 feet

You should keep your eye out for the SNODE 80lb Adjustable Dumbbells. They’re going to be a serious contender to the Nuo Bells (unfortunately I can’t buy them yet as they’re not available in my country). The Nuo Bells are very good too (I own a pair). Their changing mechanism and ability to change weights instantly is incredible. But at the sametime, SNODE adjustable dumbbells are more compact and more durable. Thinking about selling my Nuo Bells and upgrade to them in the future. Hope this helps.

@MadScientistOfMuscle

2 жыл бұрын

Interesting - I'll have to check those out!

@strengtholdschool

Жыл бұрын

They wont be contenders with 10 lb jumps in weight. That's far too much for dumbbells. Ideally, 2 kg (4.4 lb) jumps in weight are standard, but even then it can feel too heavy for certain body part exercises.

@joefrank1982

Жыл бұрын

Thank you, this is exactly what I was looking for!

I never drop dumbbells. I’ll purchase 85+ lbs hex rubber dumbbells separately. Those 5-80 lbs Nuobell’s saves me a lot of space.

Gday, considering getting Nuobells vs MX55s over the next month I also have Ironmasters which I've had since mid 2020, but due to them being slow to change between sets I prefer to only use them for heavy compound type of movements like presses, rows and shrugs and always have them loaded with at least 55lbs, so I have a few lighter pairs of kg hex dumbbells too for accessories/drop sets, but I've found a few pairs to have annoying weight discrepancies and I'd need a heap of space and cash to get the amount of dumbbells I'd want to truly compliment the Ironmasters (keep the Ironmasters for say 90lbs+ or kettlebell exercises). You mentioned you had a full rack of dumbbells but even then you use the Nuobells alot, is it a convenience thing, or do you like the feel of them? I do like the convenience of the Nuobell in the twist and pick up design and that they have higher weight ranges than the MX55s (2-32kg and 5-80lbs available) and where I am they have a 3 year warranty compared to MXs 12 months, but I feel the MX55s may be more durable in the long term with less plastic parts, particularly with none in the cradle to rack/unrack. No problems for you in that regard? Tough call, perhaps some reassurances from the supplier in regards to the warranty/spare parts available may sway me to going with the Nuobells 🤷‍♂️

@MadScientistOfMuscle

2 жыл бұрын

I actually quite like the feel of these over the other dumbbells I have. They have a bit thicker handle so they're great for getting a bit more forearm work in. I haven't had any issues with durability but you're right about the plastic parts - more chance of that happening. I don't see it as a big problem as long as you're not dropping the weights or anything.

@henryw31

Жыл бұрын

I am selling my ironmasters because to your point I don't like changing them at all.

Could you tell the diameter of the plates (in cm)? Thanks! :)

How are they holding up still Nick? Those and the bench look fantastic to bring on the road if you are camping or something

@MadScientistOfMuscle

Жыл бұрын

They're still holding up good - I use them regularly still, too. No trouble with the mechanisms at all - still solid. And yep, along with that foldable bench, they would really give you a ton of options to work with in a small space.

Been looking for a review under more robust use but can't find one. E.g. doing a snatch or clean and press from the ground. (I do these a lot with KBs and DBs.)The grip changes as you lift upward. For example, with a snatch, at the ground, the grip is hammer or palm facing back. By the time you finish the snatch and lock out up top, the grip would be hammer/neutral or palm forward, and the rotating of the whole DB on the way up could make it want to turn in your hand after completion of motion. . When putting force on the DB during movement so that the handle wants to spin in your hand (hasn't anyone had that happen when coming to the top of a curl, for instance?) then would this spin force make the DB want to "click" into the next weight up or down?... Does this make sense? Or cn the DB handle even turn and "click" out of the current weight if it's not in its cradle? What are your thoughts on that? Thanks.

@MadScientistOfMuscle

2 жыл бұрын

Sorry for the delay in getting back to you! Totally get where you're coming from. I haven't seen that happen with these dumbbells. The plates won't "unlock" unless they're setting in the stands. They will rattle a little bit, but they won't come loose and disconnect.

With all the KZread reviewers I am surprised nobody has done a drop test of the nuobells.......patiently waiting

@MadScientistOfMuscle

2 жыл бұрын

I would like to see that, too! I think it would hold up ok for short drops and depending on how it hit the ground, e.g. if it hit flat, it would be ok. If it hit the edge first, you'd probably see breakage. Would depend on how heavy it was set to as well.

I think the fear of having part of these break is over blown. These a a relatively new product, but I feel like in a couple years, there will be replacement parts available on the market. You likely wont have to replace the whole set if a part breaks. There is no reason you shouldn't be able to get a replacement stand, a singe plate, or a new handle if the changing mechanism fails.

@MadScientistOfMuscle

2 жыл бұрын

Yep, I would agree with that.

@plmn93

Жыл бұрын

They have a video on how to replace the handle, so apparently it's pretty common for them to break. These are expensive and should be expected to last decades. Perhaps they will, but I wouldn't bet on it. And if they improve them over the years, you will probably no longer be able to get parts.

@AverageJoeInnovationsLLC

Жыл бұрын

This is not the case. I just did a teardown of the Nuobell handle and I can tell you that they are not what I would describe as DIY repairable even if parts were available (they aren't). I plan to do a second teardown at some point just to demonstrate how to non destructively disassemble the handles...now that I have the luxury of knowing how they're designed internally. Nuobell's two primary weaknesses are the delicate plate locking mechanism and plastic internal cam followers. Once those internal cam followers shear off the handle is toast. A secondary weakness is the telescoping shaft design. Bend the shafts even slightly from dropping the dumbbells and they will no longer retract.

@trevorpullen3199

Жыл бұрын

@@AverageJoeInnovationsLLC I mean you could buy a new handle without having to I buy a whole new set.

@AverageJoeInnovationsLLC

Жыл бұрын

@@trevorpullen3199 Absolutely, buying a handle is always an option. But I imagine most customers aren't thinking that the handles of an 800$ dumbbell should be disposable. It's a waste of resources. As I point out in my vid, Nuobell needs to make the handles repairable and provide replacement parts. I'm sure they're concerned about potential liabilities of DIY, but it's no different than DIY auto repair at that point.

I just bent the shaft on mine by setting the dumbbells on a 17” high bench after a set and it rolled off. I could not move the handle to get them off so had to pound the center bar out to get them off so I could buy a new handle. I had 80 lbs on so it was a lot of weight dropping on the floor. Don’t set them on the bench.

@MadScientistOfMuscle

8 ай бұрын

oh man, yeah, that kind of drop will be tough on these things.

If for example you fail the last rep of flat bench, and have to drop the nuobells from ~13in do you think that could break them?

@MadScientistOfMuscle

2 жыл бұрын

Honestly, the heavier of a weight you're using with those and if that happened, the likelier that could be a problem. I haven't tested that specifically but the plastic parts that hold the plates in place could potentially crack, depending on how they were dropped. Not as much force with lighter weights, but dropping it at 80 lbs could potentially break it.

@huggyturtle9531

2 жыл бұрын

@@MadScientistOfMuscle Thanks! I treat my equipment with respect too, but getting stuck in flat bench is something I could imagine happening.

@MadScientistOfMuscle

2 жыл бұрын

@@huggyturtle9531 for sure

Do you still have these use them often and are they in good shape?

@MadScientistOfMuscle

3 ай бұрын

I used them up until a few weeks ago and they held up really well! I actually gave them to my nephew who's starting up a home gym. I have a full rack of regular dumbbells, so I'm covered and he needed them more than me!

I ordered mine through SMRTFT pretty much the same company right ? Or is SMRTFT the original company that sells nüobell ?

@MadScientistOfMuscle

2 жыл бұрын

yep, that company is the manufacturer. I got mine from a distributor that sells them as well.

Great video! I had nuobells for a few months and the plastic connector broke. I immediately returned it. It may be a rare case but I cannot risk the dumbbell breaking like that. I’ll stick with powerblocks and ironmasters 👍

@MadScientistOfMuscle

2 жыл бұрын

Wow, sorry to hear that! Definitely something to be aware of.

@futbol1972

2 жыл бұрын

Damn thats crazy. And that's why I went with properties powerblocks")

@futbol1972

2 жыл бұрын

Love my pro series powerblocks

How thick is the handle? I find some sites saying one thing and others stating another.

@MadScientistOfMuscle

2 жыл бұрын

It's definitely a little bit thicker than a normal hex or pro style handle...just a tiny bit. It's not thick enough to qualify as a fat handle, but it's definitely noticeably thicker than a normal handle.

Which brand/model is the foldable bench please?

@MadScientistOfMuscle

6 ай бұрын

That bench is from Finer Form - got a full review of it here: www.fitstep.com/2/2-how-to-build-muscle/training-equipment-reviews/finer-form-foldable-flat-bench-review.htm - it's a nice piece!

Do you think these are durable enough to perform man makers on a well padded (mma type padding) floor? Over an extended period of time (weeks, months, year)? Thank you

@MadScientistOfMuscle

7 ай бұрын

I think as long as they don't get slammed down onto the floor too hard and are controlled down into the bottom, they should be fine.

@groundunder12

7 ай бұрын

@@MadScientistOfMuscle thank you Nick👍🏻

@MadScientistOfMuscle

7 ай бұрын

you bet!@@groundunder12

Haven't heard P.O.F. mentioned in a long time.

I hear a rattling when people go overhead, how is the feel when performing an overhead press

@MadScientistOfMuscle

Жыл бұрын

I haven't had any issues with instability or rattling when pressing overhead. I've noticed a bit of that with exercises like curls where you're changing the orientation of the dumbbells during the exercise. Nothing that is concerning, though, in my experience.

I like the Nuobells but my concern is the plastic pin that's in the center of the weights. How long will that last before it begins to crack and break.

@MadScientistOfMuscle

2 жыл бұрын

Fair question. I've had mine for awhile and haven't seen any signs of cracking. It's pretty solid plastic so likely should last a long time with normal use.

Are the nuobells still holding up?

@MadScientistOfMuscle

Жыл бұрын

they are, yep!

Are these still holding up?

@MadScientistOfMuscle

Жыл бұрын

yep still good so far!

Still holding up good?

@MadScientistOfMuscle

Жыл бұрын

They are still going strong after another year! I am careful not to drop them, but in terms of normal use, they're holding up really well. The mechanisms are all still smooth and the plates still line up exactly right.

Ok lets be honest sometimes you drop a dumbbells it does not mean you did it on purpose. It happens period. So your saying if these drop your screwed.?.?. Lol.

@MadScientistOfMuscle

Жыл бұрын

Honestly, that's a possibility! It would depend on how the dumbbell hits the ground. Might be fine but there is a non-zero chance that there could be breakage.

@user-yv4kn2ws8r

11 ай бұрын

I did it broke handke should be all metal

Just get Powerblocks

Jesus enough about equipment respect

This is a pretty useless review by the look of it, people want to know how rugged these are, its the biggest question I've seen. And you don't really offer any insight into that.

Those bicep curls had me in tears lol this video was not very helpful at all

@hellboy66153

2 жыл бұрын

You talking about the concentration flys? At no point did he curl

Lol what’s that gay floor sweeping move you did after dumbbell press?

@MadScientistOfMuscle

2 жыл бұрын

That's a cross-body flye - it hits the peak contracted position of the pecs, similar to a pec-deck or cable cross over but using free weight. Really gives a solid contraction.

@brandonbandstra226

2 жыл бұрын

@@MadScientistOfMuscle Nick handled that question like a mature man. Props