You are a good person Thank you for this video😃

Yall made it easy and simple

Cabrones.... good video overall. I still need to research a little more but you guys gave me a good idea on how to do it. Thanks 🤙🏽

Hola a los cuantos kilómetros se le cambia la cadena al subaru. Saludos

Hello friend nice video just let me understand the Engine lock or tight it is normal? Thank you guys.

Yall forgot that the crank pulley mark gotta be 180 degrees

Do I have to remove the high pressure fuel pump to do the time Ig because my cam won’t move to the position

Question does the crank mark have be exactly at 6 o clock ??? When lined up everything ?

Those chain tensioners will take all the slack out after the engine has started, they operate with oil pressure.

How did you mark the crank? The sharpie mark, how and ware does it come from?

@wolfpackmechanics

6 жыл бұрын

Tim Sakharchuk the harmonic balancer only goes one way. The harmonic balancer has a small key that lines up with the crank and that is the marking we put because once you put the harmonic balancer on the crank you can't see the cut on the crank

Me watching this knowing damn well I'm never going to do something like this on my own

hello guys !....i have a 2017 subaru wrx fa20 and my car was hit in right side lower by the exhaust oil control selenoide and what happen is selenoide is completly damage too and im already bought it but plug was damage too ....so.....my question is if you can showing me please whats the right order and what (the order) colors goes in the selenoide plastic plug ? .......any picture or a video recommendation or website you can providing me please ? ...thank you ill appreciate ....

Isn’t it enough to put the arrows facing each other’s ? I mean the blue mark Should be lined up too ? Can a wrong timing belt setup work well but creates knocking problems on cylinder 1 after warmup ?

@jacobtravissampson17

Жыл бұрын

HUH?

So did it work?

Good video. Thnx for the info. I got to do a frs recall today for the valve spring recall.

@wolfpackmechanics

5 жыл бұрын

rafael3380 no problem! And thanks for watching!

@dieseldog2457

5 жыл бұрын

Hey man, how are those valve spring recalls going, I have just finished my 9th one. Just watched video out of interest. Not a bad job eh? biggest nuisance is cleaning sealer off!

Did the engine run fine after this?

@alexandriavinichenko3973

3 жыл бұрын

Junk kzread.info/dash/bejne/X5541M1-da6faag.html

When you turned the engine manually and it jumped a quarter turn. Is that normal? Cause mine does the same and I aligned everything and it does that jump when I first started the engine with it in. Please reply about your start up. Thanks fellas. I don't wanna take it out again :(

@gsohi9700

3 жыл бұрын

Did you end up figuring this out ? I’m stuck on this atm

@bigholeintheground

2 жыл бұрын

@@gsohi9700 Did you figure this out - I had this happen and I thought something had broken - obviously it has something to do with the dynamic timing.

I’m late asf , but those confused about that line, just know there’s a machined indent in the near itself, The key stone it’s self is centered between 2 teeth and it’s the one one the lift that has a marking

Will this work on my 2017 Subaru wrx fa20?

@joeyhanson5322

3 жыл бұрын

Same motor 15-19

You crazy is back clock 🤣😭😂

Hello sir I have rattling noice at start for 1 second then disappeard of my car toyota altis 1.6 manual transmission Can you help me the solution of this problem

@bimmerTFF

Жыл бұрын

you need a new timing chain

Shocking vlog

@alexandriavinichenko3973

3 жыл бұрын

Right kzread.info/dash/bejne/X5541M1-da6faag.html

YOU GUYS NEED ANOTHER CAMERA MAN

TALK ABOUT THE COWBOYS,GLAD YOU NOT WORKING ON MY SUBARU