hello guys !....i have a 2017 subaru wrx fa20 and my car was hit in right side lower by the exhaust oil control selenoide and what happen is selenoide is completly damage too and im already bought it but plug was damage too ....so.....my question is if you can showing me please whats the right order and what (the order) colors goes in the selenoide plastic plug ? .......any picture or a video recommendation or website you can providing me please ? ...thank you ill appreciate ....
@paulricketts286310 ай бұрын
TALK ABOUT THE COWBOYS,GLAD YOU NOT WORKING ON MY SUBARU
@Sedate4K Жыл бұрын
Question does the crank mark have be exactly at 6 o clock ??? When lined up everything ?
@kalolotuliloa57542 жыл бұрын
Tell me picture
@unisoftserve2 жыл бұрын
Isn’t it enough to put the arrows facing each other’s ? I mean the blue mark Should be lined up too ? Can a wrong timing belt setup work well but creates knocking problems on cylinder 1 after warmup ?
@jacobtravissampson17 Жыл бұрын
HUH?
@emmagarcias14262 жыл бұрын
You crazy is back clock 🤣😭😂
@stevebrewster22612 жыл бұрын
Do I have to remove the high pressure fuel pump to do the time Ig because my cam won’t move to the position
@VictorCastillo-jc5to3 жыл бұрын
YOU GUYS NEED ANOTHER CAMERA MAN
@maxwellakwaboa20323 жыл бұрын
Where's your shop,l have 2013 Subaru forester engine to fix.My name is Maxwell l live at long island new yourk.phone number 631 4158416 thanks.
@bboyairrick3 жыл бұрын
Why didnt you have the engine fully assembled before you put it back in?
@victorfernandez2343 жыл бұрын
So did it work?
@pukaman13 жыл бұрын
The music is annoying
@brendonsmith69563 жыл бұрын
Will this work on my 2017 Subaru wrx fa20?
@joeyhanson53223 жыл бұрын
Same motor 15-19
@treesniper35783 жыл бұрын
Just got a 94 prelude with the f22 where’d you find your parts?
@alexandriavinichenko39733 жыл бұрын
Fb20 junk sell your car kzread.info/dash/bejne/X5541M1-da6faag.html
@coffee33443 жыл бұрын
I’m late asf , but those confused about that line, just know there’s a machined indent in the near itself, The key stone it’s self is centered between 2 teeth and it’s the one one the lift that has a marking
@gingcraft3 жыл бұрын
Can y’all make videos about the celica or hmu also my buddy has a prelude
@philbee...live..it..to..th57584 жыл бұрын
Shocking vlog
@alexandriavinichenko39733 жыл бұрын
Right kzread.info/dash/bejne/X5541M1-da6faag.html
@chrisspencer88154 жыл бұрын
Hey bro I have a 92 turbo also what's your instagram
@andrewcarmona30253 жыл бұрын
Do you have videos of your car
@chrisspencer88153 жыл бұрын
@@andrewcarmona3025 just pictures on the gram
@gillermotorres51844 жыл бұрын
When you turned the engine manually and it jumped a quarter turn. Is that normal? Cause mine does the same and I aligned everything and it does that jump when I first started the engine with it in. Please reply about your start up. Thanks fellas. I don't wanna take it out again :(
@gsohi97003 жыл бұрын
Did you end up figuring this out ? I’m stuck on this atm
@bigholeintheground2 жыл бұрын
@@gsohi9700 Did you figure this out - I had this happen and I thought something had broken - obviously it has something to do with the dynamic timing.
@josuemiltonflores3904 жыл бұрын
Hello friend nice video just let me understand the Engine lock or tight it is normal? Thank you guys.
@infinitig35494 жыл бұрын
Wow it sounds really nice
@ayushmehta96514 жыл бұрын
I bought this exhaust but I have a sedan 2003 g35. Will it still work?
@kinxsoccer5714 жыл бұрын
Ayush Mehta might need an extension
@sarchavius11114 жыл бұрын
it wont work
@ayushmehta96514 жыл бұрын
Sarchavius are you sure
@sarchavius11114 жыл бұрын
Ayush Mehta yes they have completely different exhaust systems
@ayushmehta96514 жыл бұрын
Sarchavius it said it would fit the sedan
@itsmrangel76674 жыл бұрын
Me watching this knowing damn well I'm never going to do something like this on my own
@XxIMEXICANxX4 жыл бұрын
Yall forgot that the crank pulley mark gotta be 180 degrees
@XxIMEXICANxX4 жыл бұрын
Yall made it easy and simple
@DavidRider4 жыл бұрын
what sealant did you use?
@TheGluttony884 жыл бұрын
Same engine I just got with my prelude 92''
@aguaxv80695 жыл бұрын
Hola a los cuantos kilómetros se le cambia la cadena al subaru. Saludos
@changodrift5 жыл бұрын
Cabrones.... good video overall. I still need to research a little more but you guys gave me a good idea on how to do it. Thanks 🤙🏽
@gustavogonzalez97555 жыл бұрын
Im planing on rebuilding mine same f22a1 on my accord and wanted to add small boost turbo.. But what kit or rebulid are u using thanks
@gustavogonzalez97555 жыл бұрын
Hows the rebuild going
@trave9165 жыл бұрын
Did the engine run fine after this?
@alexandriavinichenko39733 жыл бұрын
Junk kzread.info/dash/bejne/X5541M1-da6faag.html
@GEO35355 жыл бұрын
You are a good person Thank you for this video😃
@living2learn1385 жыл бұрын
Hey man, how loud does it get inside the car? I'm looking to get something for me G that has a nice sounds to it but that is quiet when cruising.
@Fishtail_Z4 жыл бұрын
You should probably get an Invidia Gemini then
@usmanhaider53295 жыл бұрын
Hello sir I have rattling noice at start for 1 second then disappeard of my car toyota altis 1.6 manual transmission Can you help me the solution of this problem
@bimmerTFF Жыл бұрын
you need a new timing chain
@rafael33805 жыл бұрын
Good video. Thnx for the info. I got to do a frs recall today for the valve spring recall.
@wolfpackmechanics5 жыл бұрын
rafael3380 no problem! And thanks for watching!
@dieseldog24575 жыл бұрын
Hey man, how are those valve spring recalls going, I have just finished my 9th one. Just watched video out of interest. Not a bad job eh? biggest nuisance is cleaning sealer off!
@williamfoster42685 жыл бұрын
Those chain tensioners will take all the slack out after the engine has started, they operate with oil pressure.
@sergior6095 жыл бұрын
Anything else done to the G35 before installing the exhaust?
@wolfpackmechanics5 жыл бұрын
No, the exhaust was the first mod done to the car
@sergior6095 жыл бұрын
Wolf Pack Mechanics how is the fitment on the kit? Kinda see that it doesn’t line up properly with the left cutout. It sounds great! And so far it’s my top pick for exhaust.
@wolfpackmechanics5 жыл бұрын
Yea when I removed the muffler the rubber hangers broke so we just tried to hang it the best we could. But I have it fixed now and its all lined up perfectly. It looks uneven because it had no hangers on the rear
@hygradehydro37913 жыл бұрын
Hey man, I just got this exhaust. Do you know which hangers u got? The right side on exhaust is not lining up correctly with the stock hangers. Not sure if it’s the hangers or maybe the exhaust.
@TimmyTrades6 жыл бұрын
How did you mark the crank? The sharpie mark, how and ware does it come from?
@wolfpackmechanics6 жыл бұрын
Tim Sakharchuk the harmonic balancer only goes one way. The harmonic balancer has a small key that lines up with the crank and that is the marking we put because once you put the harmonic balancer on the crank you can't see the cut on the crank
Пікірлер
hello guys !....i have a 2017 subaru wrx fa20 and my car was hit in right side lower by the exhaust oil control selenoide and what happen is selenoide is completly damage too and im already bought it but plug was damage too ....so.....my question is if you can showing me please whats the right order and what (the order) colors goes in the selenoide plastic plug ? .......any picture or a video recommendation or website you can providing me please ? ...thank you ill appreciate ....
TALK ABOUT THE COWBOYS,GLAD YOU NOT WORKING ON MY SUBARU
Question does the crank mark have be exactly at 6 o clock ??? When lined up everything ?
Tell me picture
Isn’t it enough to put the arrows facing each other’s ? I mean the blue mark Should be lined up too ? Can a wrong timing belt setup work well but creates knocking problems on cylinder 1 after warmup ?
HUH?
You crazy is back clock 🤣😭😂
Do I have to remove the high pressure fuel pump to do the time Ig because my cam won’t move to the position
YOU GUYS NEED ANOTHER CAMERA MAN
Where's your shop,l have 2013 Subaru forester engine to fix.My name is Maxwell l live at long island new yourk.phone number 631 4158416 thanks.
Why didnt you have the engine fully assembled before you put it back in?
So did it work?
The music is annoying
Will this work on my 2017 Subaru wrx fa20?
Same motor 15-19
Just got a 94 prelude with the f22 where’d you find your parts?
Fb20 junk sell your car kzread.info/dash/bejne/X5541M1-da6faag.html
I’m late asf , but those confused about that line, just know there’s a machined indent in the near itself, The key stone it’s self is centered between 2 teeth and it’s the one one the lift that has a marking
Can y’all make videos about the celica or hmu also my buddy has a prelude
Shocking vlog
Right kzread.info/dash/bejne/X5541M1-da6faag.html
Hey bro I have a 92 turbo also what's your instagram
Do you have videos of your car
@@andrewcarmona3025 just pictures on the gram
When you turned the engine manually and it jumped a quarter turn. Is that normal? Cause mine does the same and I aligned everything and it does that jump when I first started the engine with it in. Please reply about your start up. Thanks fellas. I don't wanna take it out again :(
Did you end up figuring this out ? I’m stuck on this atm
@@gsohi9700 Did you figure this out - I had this happen and I thought something had broken - obviously it has something to do with the dynamic timing.
Hello friend nice video just let me understand the Engine lock or tight it is normal? Thank you guys.
Wow it sounds really nice
I bought this exhaust but I have a sedan 2003 g35. Will it still work?
Ayush Mehta might need an extension
it wont work
Sarchavius are you sure
Ayush Mehta yes they have completely different exhaust systems
Sarchavius it said it would fit the sedan
Me watching this knowing damn well I'm never going to do something like this on my own
Yall forgot that the crank pulley mark gotta be 180 degrees
Yall made it easy and simple
what sealant did you use?
Same engine I just got with my prelude 92''
Hola a los cuantos kilómetros se le cambia la cadena al subaru. Saludos
Cabrones.... good video overall. I still need to research a little more but you guys gave me a good idea on how to do it. Thanks 🤙🏽
Im planing on rebuilding mine same f22a1 on my accord and wanted to add small boost turbo.. But what kit or rebulid are u using thanks
Hows the rebuild going
Did the engine run fine after this?
Junk kzread.info/dash/bejne/X5541M1-da6faag.html
You are a good person Thank you for this video😃
Hey man, how loud does it get inside the car? I'm looking to get something for me G that has a nice sounds to it but that is quiet when cruising.
You should probably get an Invidia Gemini then
Hello sir I have rattling noice at start for 1 second then disappeard of my car toyota altis 1.6 manual transmission Can you help me the solution of this problem
you need a new timing chain
Good video. Thnx for the info. I got to do a frs recall today for the valve spring recall.
rafael3380 no problem! And thanks for watching!
Hey man, how are those valve spring recalls going, I have just finished my 9th one. Just watched video out of interest. Not a bad job eh? biggest nuisance is cleaning sealer off!
Those chain tensioners will take all the slack out after the engine has started, they operate with oil pressure.
Anything else done to the G35 before installing the exhaust?
No, the exhaust was the first mod done to the car
Wolf Pack Mechanics how is the fitment on the kit? Kinda see that it doesn’t line up properly with the left cutout. It sounds great! And so far it’s my top pick for exhaust.
Yea when I removed the muffler the rubber hangers broke so we just tried to hang it the best we could. But I have it fixed now and its all lined up perfectly. It looks uneven because it had no hangers on the rear
Hey man, I just got this exhaust. Do you know which hangers u got? The right side on exhaust is not lining up correctly with the stock hangers. Not sure if it’s the hangers or maybe the exhaust.
How did you mark the crank? The sharpie mark, how and ware does it come from?
Tim Sakharchuk the harmonic balancer only goes one way. The harmonic balancer has a small key that lines up with the crank and that is the marking we put because once you put the harmonic balancer on the crank you can't see the cut on the crank
I hope y’all torque everything