Honda XR250R Street Legal Part 10 : Let's Ride on the Highway!
Тәжірибелік нұсқаулар және стиль
Support my channel when you shop Amazon!
Action Camera : amzn.to/2MOU6SR
Waterproof Wire Connectors : amzn.to/2P5Q5qu
Fork Boots : amzn.to/2BPjJPa
Tusk Fender Pack : amzn.to/2PEG0lr
Tools I use
Festool Track saw : amzn.to/2vhncAA
Festool Domino : amzn.to/2wseq1n
Festool CT36 : amzn.to/2vhMKOg
Festool Orbital Sander : amzn.to/2hIpeFa
Festool Rotex : amzn.to/2vhKAOp
Rigid Table Saw : amzn.to/2vhnXJW
Rigid Spindle Sander : amzn.to/2wsb6Dl
Rigid 14 gallon Vac : amzn.to/2vi82Lx
Dewalt Planer : amzn.to/2vDyekG
Dewalt Compact Router : amzn.to/2vktLkv
Bosch Router : amzn.to/2vhH06Z
Bosch Right Angle Driver : amzn.to/2vhhqiw
Bosch Mini Driver : amzn.to/2vkJXCk
Bosch Jigsaw : amzn.to/2wslRWm
Milwaukee Drill Combo : amzn.to/2vhRnrH
Milwaukee 6.5" Circular Saw : amzn.to/2vhNhj2
Kreg K4 Pocket Hole Jig : amzn.to/2ws3qAY
Kreg Mobile Project Center : amzn.to/2vhNOBK
Micro Jig Pushblock : amzn.to/2frCbm3
Rikon Lathe : amzn.to/2uEIVim
Woodriver Turning Tools : amzn.to/2vhO2Zy
Rockler Carbine Pen Turning Set : amzn.to/2hIWGLF
Incra Box Joint Jig : amzn.to/2hHZFEq
Woodpeckers Drill Press Table : amzn.to/2ws0p3D
Rockler Taper/Straight Line Jig : amzn.to/2vhinr6
Stanley Low Angle Jack Plane : amzn.to/2vkNpg7
Delta Dust Collector : amzn.to/2hILUp5
Be Sure to Follow Me!
KZread / johnnysshop
FaceBook / realjohnnysshop
Twitter / realjohnnysshop
Instagram / johnnysshop
Пікірлер: 13
All of this is good information for me to know. I am a first time motorcycle owner, and I am learning a lot of helpful tips from these videos. Thanks
Great series of videos! I’m in the market for an XR250. Thanks for sharing your journey through the small details
Your XR looks great. It's fun to see one going down the road. I've never made mine street legal because I also have a DR650 that is street legal. Anyway, it sounds like your idle is set too high. Also, like you said, it needs to be re-jetted for the open pipe, but you might also want to re-adjust the fuel/air screw. That alone stopped the decel popping on my bike. I'm at 650' Elev, running an FMF powercore 4 muffler, 135 main and stock pilot jet with air screw 2.5 turns out. Airbox snorkel also removed, but stock air filter element. Also running stock gearing 13/48. The bike runs like a top, plenty of snap. Anyway, looking forward to more videos, very nice XR you have there.
Looks and sounds really smooth. By the way I like the Kevlar T-Shirt lol. No gloves OOOOOhhh lol
I been there, lets face it it just did not have enough power on the Hi-way jetted piped all the free mods so I got a 650 .
Great job, and much appreciated info. Are you using stock 13-48 gearing? I just bought a street legal '96 XR250R in great shape and totally restored. Just came back from a 250 mile trip (mostly mellow dirt roads) at around 4,000 ft elevation. It ran perfectly, but at 45 mph, it felt like the engine was at 90 percent RPM. There's no way I'd be able to go above 60 MPH! From what I've read 14-45 would let me hit 70 mph on pavement, but still work well for casual trail riding.
@Johnnysshop
5 жыл бұрын
I'm using stock gearing. I was worried about it hitting 60 initially but I ended up hitting 64 on the second ride and the bike felt like it had plenty more to give. I don't think it would have an issue hitting 70 but I imagine that would be max.
i used to have a 79 xr250
what episode shows the paperwork process?
How is the tachometer reading with the wrapped around the sparkplug wire? Ive got a vapor on order and am wondering which way I should wire the tach.
@Johnnysshop
5 жыл бұрын
So far it seems pretty close. I've messed with the amount of wraps to get it as close as I can.
I think the foam oil rots the filter element faster.
@Johnnysshop
5 жыл бұрын
Shouldn’t