thank you for sharing this video.. it so very helpful for me.. 😊 My hub is the same that hub.. more videos about bmx . 😊

@KamaarhKenn

Жыл бұрын

Glad to be of help

U are best !!! No info about this on russian u tube. Tnhx a lot, bro!

@KamaarhKenn

3 ай бұрын

You're welcome 🙏🙏

Awesome video

@KamaarhKenn

7 ай бұрын

Thank you 🙏🙏

I know this hub.... Matter of fact I ride this hub 😹 literally 😂

@KamaarhKenn

2 жыл бұрын

😂😂😂 The master himself

very cool video ive never had to rebuild a bmx hub but i been thinking about it. The only thing i would mention from my experience rebuilding mtb hubs they get dirty and dusty fast. is use isopropyl alcohol or some kind of solvent to clean the parts it will have them shining in no time and also if you have a shop of some sort in your area buying new ball bearing will make the rebuild possible over and over again they are very cheap. If you use the same ball bearings too much the races or rolling surfaces of the hub will be damaged and roll rougher in the future or make them un ride able. But if you dont have anything but grease you could probably do this 2-3 times and just throw the hubs out or maybe they would still be good you just have to inspect the races and parts who knows. Very good video nice music all that.

@KamaarhKenn

Жыл бұрын

Thanks man. For these hubs I try and be on alert for the maintenance. And yes, the ball bearings are so dirt cheap I have a stock of different sizes for them. So whenever I get to do a rebuild and they're lookia bit sus, I just throw some new ones on there, some thick grease and it's good to go. The open hubs are super delicate and even riding the bikes through water or some muddy terrain can be problematic.

@michaelevans6205

Жыл бұрын

@@KamaarhKenn yeah it's pretty cool with maintenance you can make parts last a very long time. How often do you have to service those ? What kinda of hub is it?

@KamaarhKenn

Жыл бұрын

This one is a semi-sealed hub. Has a sealed bearing on one side of the axle and ball bearings on the other. For me, I used to service mine whenever I got bored, which was very very often, like every other week 😂😂. But I upgraded to a fully sealed hub and that one doesn't require any maintenance at all. Just a grease check like once a month or two and it keeps rolling on until the sealed bearings wear out after quite a long time.

@Shish_cammello.

Жыл бұрын

Wow I lot of writing and u can buy one

Clean job

@KamaarhKenn

2 жыл бұрын

Thank you

@andrew1233

2 жыл бұрын

@@KamaarhKenn does same method in front?

@KamaarhKenn

2 жыл бұрын

Check these 2 videos. There's 2 different types of front hubs and I showed how to work on them separately. kzread.info/dash/bejne/c5yMs6mLiseweps.html 4:25 kzread.info/dash/bejne/hpVhwdGLpNW4hbg.html

@andrew1233

2 жыл бұрын

@@KamaarhKenn sankyu I check it

Could you put a Freewheel set up into that Hub cuz I'm thinking of doing that

@KamaarhKenn

Жыл бұрын

No you can't. Because the way freewheel hubs are designed, they have threads on either or both ends of the hub where it would screw on

Can you change the gearing on a cassette hub? I don’t want a 9t cog..

@KamaarhKenn

7 ай бұрын

You'd have to get a cassette hub with more teeth on the cog.

Hello, what Size of the ball bearing inside the Driver pawls

@KamaarhKenn

10 ай бұрын

I'm not sure what size dimensions they are exactly, but you can pull the ones off your bike and use them as samples at your local bike shop to get replacements

Hello, i have a question,, what Size of the bearing ball to that hub because that hub is same to my hub.

@KamaarhKenn

6 ай бұрын

Best way to get the size is to get one of the bearings and use them as samples at your local bike shop

What kind hub is this do you know what's brand is this

@KamaarhKenn

Жыл бұрын

I guess it is a Quando. The label had been scrubbed off so I can't remember what exactly it was

Seems pretty easy never done it looks easy asf

@KamaarhKenn

2 жыл бұрын

It is, if no nuts are seized on the axle. 10, 20 minutes and you're done with a rebuild

@matthubbard904

2 жыл бұрын

@@KamaarhKenn cool 😎

@matthubbard904

2 жыл бұрын

@@KamaarhKenn still want that S&m shield wrapped top load stem you got 🙏🙏

Back again with this horrible hub

@KamaarhKenn

2 жыл бұрын

Over here they're pretty common and they break a lot. So rather than fix everyone's hub I encourage them to just go ahead and try doing the rebuilds themselves