Just found the logo on the internet then had a buddy of mine print them out for me in vinyl
@tonynagle41944 күн бұрын
Nice job croping out what I needed to see
@KamaarhKenn3 күн бұрын
@@tonynagle4194 you're welcome 👍
@pareshdanatani4 күн бұрын
rs $
@pareshdanatani4 күн бұрын
ok😊😊❤❤
@jaytee789512 күн бұрын
Could you tell me the number of bearings used plz
@KamaarhKenn6 күн бұрын
@@jaytee7895 which ones exactly?
@aurteekay633916 күн бұрын
Wow amazing job. Especially on the paint, not many guys actually taking the time and money to use a gun to paint on KZread the right way. But the results speak for themselves! I’d buy that bike and not bat an eye probably lol. I don’t think 75 percent of people would even know.
@KamaarhKenn6 күн бұрын
@@aurteekay6339 thank you. The tools definitely help to get that nice smooth finish. A bit of time and effort and you have yourself a new bike
@35o12521 күн бұрын
isn't that chain sitting backwards?
@KamaarhKenn21 күн бұрын
@@35o125 now that I look at it, it was definitely sitting backwards 😂😂
@oldmanlogan905524 күн бұрын
I just bought a 2019 rock shock recon silver for my dirt jumper a 2019 Haro steel reserve/ it should hold up I e been dj for 20 years plus .. I even was sponsored at one time don’t listen to the haters bruh 🤘🏻 just bought the shock today
@KamaarhKenn21 күн бұрын
@@oldmanlogan9055 That's dope man. It's a pretty good fork granted what I do with the bike is mainly riding rough roads around where I live. So far so good
@dilipsingha62927 күн бұрын
Op bro 😁😁😁😁 theek hai nobade cycle rider nobade
@tuesdaytvАй бұрын
I have a wasp female axle that I will be trying to swap into the rear hub of this in the coming days. I will report back and let you know if it works. If it does not, I am going to mode the male axle into female 3/8 X 24tpi myself.
@KamaarhKenn29 күн бұрын
Sounds like a fun project. Let us know the results if it works out
@spytoyou123455 күн бұрын
Where did you buy that? In homebmx shop??
@HcType_rАй бұрын
My dad gonna buy me cool bike
@KamaarhKennАй бұрын
Safe riding my friend 👊👊
@AnimaJamatiaАй бұрын
Hi bro you will sell this cycle bmx
@AnimaJamatiaАй бұрын
Hi bro you will sell this cycle reply
@KamaarhKennАй бұрын
Not for sale
@heartbreakcreamery2503Ай бұрын
Damn that's dope! Great work brother!
@KamaarhKennАй бұрын
Much appreciated, thank you
@CallofDoobie585Ай бұрын
I think i woulda at least trimmed that lenth of cable in the back just a bit but hey, to eachs own
@KamaarhKennАй бұрын
That's what came on the bike, I was just reinstalling the system as it was
@lost.6x._989Ай бұрын
Yooo bro, when do y’all meet up I join you guys
@KamaarhKennАй бұрын
Most rides are just impromptu but we're planning a few rides soon. Stay tuned
@MNpickerАй бұрын
Carfull😬
@KamaarhKennАй бұрын
Definitely 👌
@sammyjr3396Ай бұрын
Jinga jinga...mmeweza ...keep on representing
@KamaarhKennАй бұрын
Lazima bro 👊👊
@mtbproGАй бұрын
respect crew🤫
@KamaarhKennАй бұрын
👌👌
@kabacho-s7bАй бұрын
how much did the bike gor for?
@KamaarhKennАй бұрын
Around 90 USD.
@lost.6x._989Ай бұрын
When is the next bike meet? I wanna join
@KamaarhKennАй бұрын
Still in the works for sometime later in the year, but it will definitely be communicated out.
@Youseff._965Ай бұрын
Damnnn bro cleann ❤❤❤
@KamaarhKennАй бұрын
Thank you 👏
@JoelWilliamBMXАй бұрын
I want my freecoaster HUB to be louder.. will this work?
@KamaarhKennАй бұрын
If you want it dead after 10 minutes, yes 😂😂
@Slimcycles44Ай бұрын
That is definitely some work😊🌷 #bmxkenya ⚡
@KamaarhKennАй бұрын
Still more to come 😅😅👌
@matthubbard904Ай бұрын
Should listen to the super cross bmx hub and primo balance hub those hubs sound like a swarm of pissed off bees 🐝
@KamaarhKennАй бұрын
If this colony replica is anything to go by, then those I definitely wouldn't want to be around for long 😅. Riding through traffic on this thing just makes my ears irritated after a while 😂😂
@matthubbard904Ай бұрын
@@KamaarhKenn if you get your hands on a primo balance rear cassette wheel or super cross you won’t want nothing else
@KamaarhKennАй бұрын
We'll see what happens down the line. I might change my mind and want something louder than this 😅😅
@matthubbard904Ай бұрын
@@KamaarhKenn yeah for sure bro lol 😂
@andrew1233Ай бұрын
2:48☠
@KamaarhKennАй бұрын
The springs are kinda hidden by my fingers there a little bit 😅
@andrew1233Ай бұрын
@@KamaarhKenn what you did is going to reduce dramatically the hub lifespan lol I got a friend who did that he got lot of money so it's fine, just the right spring tension with do👌
@KamaarhKennАй бұрын
Well, it's part of the long term testing I'm doing on the hub. I want to see just how long this Chinese brand hub will last. Think of it as me testing it out so if you consider buying it, you don't have to 😅
@andrew1233Ай бұрын
@@KamaarhKenn his hub is still holding fine till now from what i remember he did that 2 year ago already that guy rarely rides but his bro rides it sometimes the hub still sound the same xd
@KamaarhKennАй бұрын
Exactly why I wanted to try it out. I wanted to see what would give out first. The splines in the hub or the pawls. And since I ride the bike very often, it should give me a good understanding of how well it holds up over time 😅
@andrew1233Ай бұрын
yerd
@matthubbard904Ай бұрын
Sweet sound to my ears 👂
@JoelWilliamBMXАй бұрын
Ni nini unajiangusha 23:37 😆😆
@KamaarhKennАй бұрын
Kiherehere ya salamu 😂😂😂
@litboiyarah23Ай бұрын
Msee aliparara😂😂
@KamaarhKennАй бұрын
😂😂😂Mbaya sana
@newtonnyongesa8119Ай бұрын
Hiyo ride out yenye sam alianguka nlikuwa nae alipo bunny hop ndio hvyo alijipata down simu hyo kwa road 😂😂
@KamaarhKennАй бұрын
Aaah, uliiona live yaani 😂😂😂
@newtonnyongesa8119Ай бұрын
Nmekosekana nyengine iko lini? 😅
@KamaarhKennАй бұрын
Tutapanga moja official tuite crew zote zitaweza kufika watu watokee 😅😅
@sammyjr3396Ай бұрын
Jinga jinga ...keep it up crew
@KamaarhKennАй бұрын
Lazima man 👊👊👊
@philipwambua1596Ай бұрын
Nini inaangusha professional driver bana
@KamaarhKennАй бұрын
Kiherehere ya salamu 😂😂😂
@andrew1233Ай бұрын
Yerd🔥
@KamaarhKennАй бұрын
🙌🙌👊👊👊
@dredORDER666Ай бұрын
🔥
@KamaarhKennАй бұрын
👊👊
@user-ii5xd9kj9gАй бұрын
Noma🔥
@KamaarhKennАй бұрын
Kabisa manze. 👊👊
@wessnation689Ай бұрын
Kuna jamaa amepigwa moshi na Citi hoppa😂
@KamaarhKennАй бұрын
There is no peace anywhere 😂😂
@andrew1233Ай бұрын
wow bro u got lot of upgrade lately thats good for you xd
@KamaarhKennАй бұрын
Thanks man. Next thing on the list is a paint job and it'll be 100% done
@bobbo9549Ай бұрын
How do you remove the ratchet that is mounted in the hub. That’s the part no describes or shows
@KamaarhKennАй бұрын
Just use a thin flathead screwdriver and push the spring wire out. But not with too much force because the spring wire might deform and won't work correctly
@nikhiljha38952 ай бұрын
Keep moving bro ❤
@KamaarhKenn2 ай бұрын
Much appreciated fam 👊👊
@JonRobot2 ай бұрын
Dawg… never heard of paint stripper before?
@KamaarhKenn2 ай бұрын
Clearly you haven't watched the full video.
@v3rm1llon2 ай бұрын
Joli job mec👍🏻
@Dfox4202 ай бұрын
Looks like a salt hub like mine
@KamaarhKenn2 ай бұрын
It probably is. But unfortunately there wasn't any branding on it so it wasn't possible to tell what brand it is
@NoQualmsTheArtist2 ай бұрын
That's some gangsta shit, paint stripping in socks and floral slides 😂
@KamaarhKenn2 ай бұрын
Hahaha, it's a wonder that I've never gotten any of that stuff on my feet during this process because that stuff burns.
@andrew12332 ай бұрын
nice build bro, i didnt knew there was such a plate like that with 19mm hole such a nice thing, you dont need to deal about the plate being in center with chaing ring xd
@KamaarhKenn2 ай бұрын
These are one of those rare finds I come across and I realize there's just so much crazy stuff in the BMX world that I don't know about.
@andrew12332 ай бұрын
@@KamaarhKenn indeed bro i bet u did not know the eastern cranks with 8spline but works like 48spline xd
@twiztidsidfreak132 ай бұрын
Even a stock bike needs a refresh and tune up
@KamaarhKenn2 ай бұрын
Definitely, gotta keep them running in tip top condition.
@matthubbard9042 ай бұрын
Were did you get the gold cranks from ?
@KamaarhKenn2 ай бұрын
Those actually came with the bike. Along with the gold finished handlebars.
@matthubbard9042 ай бұрын
@@KamaarhKenn oh ok so it was complete bike
@KamaarhKenn2 ай бұрын
Yes. It just needed a few extra parts but those were easy to get
@matthubbard9042 ай бұрын
@@KamaarhKenn cool
@drewanstore55502 ай бұрын
Hey, thank you for the video. I'm trying to take apart the semi-sealed hub of my daughter's bike but opening the nuts next to the cassette seems impossible, they won't move a millimeter. I have sprayed it with anti-corrosion/anti-jam oil, but no success. You open it with ease at 1:35 of this video - how do you do it like that, without holding the opposite side, as these nuts turn with the axle? Thanks again!
@drewanstore55502 ай бұрын
Okay got it open - the ****er was jammed TIGHT. I also learnt it was actually sealed, although it was supposed to be semi-sealed. The reason I wanted to take it apart was that the cranks would keep turning when pushing the bike. So, having got it open, I cleaned and greased the pawls etc. and put everything back together - but the cranks still turn when pushing the bike. What would you suggest, what should I try next? Thanks again for very helpful videos.
@KamaarhKenn2 ай бұрын
@@drewanstore5550 Great. sometimes the pedals will turn when there's not enough tension in the chain. or when there's too much tension in the pawls of the cassette driver. My current setup runs double springs for extra sound but the trade off is the cranks always move when pushing the bike along.
@vleonett28902 ай бұрын
Hey I didn't comment for a long but I just wanna say keep going✌️🔥
@KamaarhKenn2 ай бұрын
Much appreciated fam. There's definitely a lot more content on the way.
Пікірлер
Where did you get the sunday stickers?
Just found the logo on the internet then had a buddy of mine print them out for me in vinyl
Nice job croping out what I needed to see
@@tonynagle4194 you're welcome 👍
rs $
ok😊😊❤❤
Could you tell me the number of bearings used plz
@@jaytee7895 which ones exactly?
Wow amazing job. Especially on the paint, not many guys actually taking the time and money to use a gun to paint on KZread the right way. But the results speak for themselves! I’d buy that bike and not bat an eye probably lol. I don’t think 75 percent of people would even know.
@@aurteekay6339 thank you. The tools definitely help to get that nice smooth finish. A bit of time and effort and you have yourself a new bike
isn't that chain sitting backwards?
@@35o125 now that I look at it, it was definitely sitting backwards 😂😂
I just bought a 2019 rock shock recon silver for my dirt jumper a 2019 Haro steel reserve/ it should hold up I e been dj for 20 years plus .. I even was sponsored at one time don’t listen to the haters bruh 🤘🏻 just bought the shock today
@@oldmanlogan9055 That's dope man. It's a pretty good fork granted what I do with the bike is mainly riding rough roads around where I live. So far so good
Op bro 😁😁😁😁 theek hai nobade cycle rider nobade
I have a wasp female axle that I will be trying to swap into the rear hub of this in the coming days. I will report back and let you know if it works. If it does not, I am going to mode the male axle into female 3/8 X 24tpi myself.
Sounds like a fun project. Let us know the results if it works out
Where did you buy that? In homebmx shop??
My dad gonna buy me cool bike
Safe riding my friend 👊👊
Hi bro you will sell this cycle bmx
Hi bro you will sell this cycle reply
Not for sale
Damn that's dope! Great work brother!
Much appreciated, thank you
I think i woulda at least trimmed that lenth of cable in the back just a bit but hey, to eachs own
That's what came on the bike, I was just reinstalling the system as it was
Yooo bro, when do y’all meet up I join you guys
Most rides are just impromptu but we're planning a few rides soon. Stay tuned
Carfull😬
Definitely 👌
Jinga jinga...mmeweza ...keep on representing
Lazima bro 👊👊
respect crew🤫
👌👌
how much did the bike gor for?
Around 90 USD.
When is the next bike meet? I wanna join
Still in the works for sometime later in the year, but it will definitely be communicated out.
Damnnn bro cleann ❤❤❤
Thank you 👏
I want my freecoaster HUB to be louder.. will this work?
If you want it dead after 10 minutes, yes 😂😂
That is definitely some work😊🌷 #bmxkenya ⚡
Still more to come 😅😅👌
Should listen to the super cross bmx hub and primo balance hub those hubs sound like a swarm of pissed off bees 🐝
If this colony replica is anything to go by, then those I definitely wouldn't want to be around for long 😅. Riding through traffic on this thing just makes my ears irritated after a while 😂😂
@@KamaarhKenn if you get your hands on a primo balance rear cassette wheel or super cross you won’t want nothing else
We'll see what happens down the line. I might change my mind and want something louder than this 😅😅
@@KamaarhKenn yeah for sure bro lol 😂
2:48☠
The springs are kinda hidden by my fingers there a little bit 😅
@@KamaarhKenn what you did is going to reduce dramatically the hub lifespan lol I got a friend who did that he got lot of money so it's fine, just the right spring tension with do👌
Well, it's part of the long term testing I'm doing on the hub. I want to see just how long this Chinese brand hub will last. Think of it as me testing it out so if you consider buying it, you don't have to 😅
@@KamaarhKenn his hub is still holding fine till now from what i remember he did that 2 year ago already that guy rarely rides but his bro rides it sometimes the hub still sound the same xd
Exactly why I wanted to try it out. I wanted to see what would give out first. The splines in the hub or the pawls. And since I ride the bike very often, it should give me a good understanding of how well it holds up over time 😅
yerd
Sweet sound to my ears 👂
Ni nini unajiangusha 23:37 😆😆
Kiherehere ya salamu 😂😂😂
Msee aliparara😂😂
😂😂😂Mbaya sana
Hiyo ride out yenye sam alianguka nlikuwa nae alipo bunny hop ndio hvyo alijipata down simu hyo kwa road 😂😂
Aaah, uliiona live yaani 😂😂😂
Nmekosekana nyengine iko lini? 😅
Tutapanga moja official tuite crew zote zitaweza kufika watu watokee 😅😅
Jinga jinga ...keep it up crew
Lazima man 👊👊👊
Nini inaangusha professional driver bana
Kiherehere ya salamu 😂😂😂
Yerd🔥
🙌🙌👊👊👊
🔥
👊👊
Noma🔥
Kabisa manze. 👊👊
Kuna jamaa amepigwa moshi na Citi hoppa😂
There is no peace anywhere 😂😂
wow bro u got lot of upgrade lately thats good for you xd
Thanks man. Next thing on the list is a paint job and it'll be 100% done
How do you remove the ratchet that is mounted in the hub. That’s the part no describes or shows
Just use a thin flathead screwdriver and push the spring wire out. But not with too much force because the spring wire might deform and won't work correctly
Keep moving bro ❤
Much appreciated fam 👊👊
Dawg… never heard of paint stripper before?
Clearly you haven't watched the full video.
Joli job mec👍🏻
Looks like a salt hub like mine
It probably is. But unfortunately there wasn't any branding on it so it wasn't possible to tell what brand it is
That's some gangsta shit, paint stripping in socks and floral slides 😂
Hahaha, it's a wonder that I've never gotten any of that stuff on my feet during this process because that stuff burns.
nice build bro, i didnt knew there was such a plate like that with 19mm hole such a nice thing, you dont need to deal about the plate being in center with chaing ring xd
These are one of those rare finds I come across and I realize there's just so much crazy stuff in the BMX world that I don't know about.
@@KamaarhKenn indeed bro i bet u did not know the eastern cranks with 8spline but works like 48spline xd
Even a stock bike needs a refresh and tune up
Definitely, gotta keep them running in tip top condition.
Were did you get the gold cranks from ?
Those actually came with the bike. Along with the gold finished handlebars.
@@KamaarhKenn oh ok so it was complete bike
Yes. It just needed a few extra parts but those were easy to get
@@KamaarhKenn cool
Hey, thank you for the video. I'm trying to take apart the semi-sealed hub of my daughter's bike but opening the nuts next to the cassette seems impossible, they won't move a millimeter. I have sprayed it with anti-corrosion/anti-jam oil, but no success. You open it with ease at 1:35 of this video - how do you do it like that, without holding the opposite side, as these nuts turn with the axle? Thanks again!
Okay got it open - the ****er was jammed TIGHT. I also learnt it was actually sealed, although it was supposed to be semi-sealed. The reason I wanted to take it apart was that the cranks would keep turning when pushing the bike. So, having got it open, I cleaned and greased the pawls etc. and put everything back together - but the cranks still turn when pushing the bike. What would you suggest, what should I try next? Thanks again for very helpful videos.
@@drewanstore5550 Great. sometimes the pedals will turn when there's not enough tension in the chain. or when there's too much tension in the pawls of the cassette driver. My current setup runs double springs for extra sound but the trade off is the cranks always move when pushing the bike along.
Hey I didn't comment for a long but I just wanna say keep going✌️🔥
Much appreciated fam. There's definitely a lot more content on the way.
@@KamaarhKenn 🤝👍🔥
thanks for the vid, was great
You're welcome