Overhaul Rear Wheel Hub Of BMX Bike
Тәжірибелік нұсқаулар және стиль
I disassemble, clean, install new bearings, lube and reassemble the rear wheel hub of a Trek Subvert 1.0 BMX bike.
▶ SUBSCRIBE & HIT THE 🔔 bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
/ rjthebikeguy
▶TOOLS
www.rjthebikeguy.com/tools
▶SHIRTS
bit.ly/RJBikeGuyShirts
▶WEBPAGE
www.RJTheBikeGuy.com
Пікірлер: 201
For more bike repair videos hit the subscribe button 🛑 and click the notification bell ► bit.ly/SubRJTheBikeGuy
@1pyroace1
5 жыл бұрын
RJ The Bike Guy is it possible to change axel size of the hub
@RJTheBikeGuy
5 жыл бұрын
@@1pyroace1 Do you mean a fatter axle? Not really.
@1pyroace1
5 жыл бұрын
RJ The Bike Guy sadly I have to downsize and I figured :(
This is the most helpful video I have seen about replacing bearings I wish I'd seen it three weeks ago.Would have saved me a big headache
I'm currently in the process of giving my bmx bike the maintenance treatment it deserves. This was a excellent video. I can't wait to give it a go. Thanks RJ!
@fabitsok
6 жыл бұрын
Many thanks, I been tryin to find out about "how often to oil a bicycle chain" for a while now, and I think this has helped. Have you heard people talk about - Viyackson Yenacob Review - (do a search on google ) ? Ive heard some great things about it and my work buddy got great results with it.
ALL of your vids have been a big help TY! I wish somebody like you lived around my area I would be your 2nd set of hands whenever I could just to learn learn and learn!
Wish I had watched this about 3 weeks ago before I took ages to work it out for myself! Great video RJ.
Excellent Teacher ! Been trying to find a Good close-up and Step by Step video on this I just Subscribed !
Thanks again RJ. Front wheel not running smoothly, followed your instructions, and found uneven number of ball bearings on each side. Cleaned parts, greased and added correct number of bearings, and wheel now runs just fine.
Awesome video. Simple, easy and clean. Greetings from oceanside, California. 👍
Outstanding Video! Just what I needed. I am now Subscribed! Thanks for your great videos!
Brilliant as usual, loved the tip on removing the thing. thanks
Thanks mate, clear step by step easy to understand vid, Cheers👍🏻
Subscribed!! Excellent video, been looking everywhere for this.
Great video hope to see more RJ! Cheers from Netherlands!!!
At Long Last seen a video that I need for fixing my Bmx bike. Thank you very much RJ the Bike Guy.
AWESOME JOB! Thank you for sharing you knowledge.
niiiice thank you i took my rear wheel apart a month ago and wheel was stuck thanks to your video i just fixed it flyin like the wind.
Really informative video dude, thanks!
Great stuff RJ
Love the vice trick!
My bike stand is rock solid no movement great for heavy bikes, push button controlled. Made my own. Great video tight cone
Useful and thanks. Needed the guidance to restore a Miraaco bmx that I picked up.
Very useful, thanks a lot!
genious man, genious!
great video, thanks
Thank you!Good video!
thanks sir i learn and it helps me a lot . Godbless :)
I'm restoring my old bmx and my rear wheel has the exact same problem. Thank you!
Excellent thank you.
Good stuff 😊
Great video.
Thanks a ton bro!
Love It !
Thanks so much!
Thank you so much!
I fussed with an old rusty freewheel for about an hour - even with the freewheel removal tool. Never even crossed my mind to put the nut back on holding the freewheel tool in place. Thanks RJ!
@RJTheBikeGuy
5 жыл бұрын
kzread.info/dash/bejne/fYp3scyTZNqpl6Q.html
Very informative
Thanks a ton man now my hubs will last alot longer
Nice video
Thanks sir.. acknowledge
Thx this helped
i have a hyper spiner its a whole lot different then it was on this 1 any adive to fix a bearing holder?.
Got any vids on how to rebuild mag wheels?
*7:54** satisfying Grease gun. ASMR like..*
Where can I buy a vise like thiss and what is it called because I wanna change to clean my bearings in my 9t driver cassette hub 14mm axle size
I have a question, Instead of using those bearing cups, could you replace with sealed bearings and new axles ? would those fit in those hubs?
What company marine grease do you use?
Do you have to remove the freewheel to take the axles and bearing out? Can you take out the axle by starting on the opposite site of the freewheel?
@RJTheBikeGuy
6 жыл бұрын
Generally yes, you have to remove it.
i like the wheels tho
My bike the kent chaos fs20 the thingy on the wheel that connects to the chain isnt compatible with that tool it has 2 small circles can anyone help
I so need to invest im a couple (thin wrench) cone wrench*s.🏁🏍️
When you spun the free wheel on you said it went counter clock wise,,it doesn't and you even spun it clock wise while you said counter!! Lol
@vonpffthausen
5 жыл бұрын
lol
Hey there, I am replacing the bearings on my bikes front wheel but don’t know what the correct size is. I’ve been thinking about going to a bike shop so they can match them. They are caged bearings, anything helps, thanks
@RJTheBikeGuy
4 жыл бұрын
Yes, for caged bearings, take them to a shop and have them physically match them.
@bigsandwich
4 жыл бұрын
Thanks! Just found your channel and it’s great
Thanks for the videos! Can you tell me what that little thumb pump grease gun is called, or where I might find one? What types of grease are best for bicycles?
@RJTheBikeGuy
4 жыл бұрын
www.amazon.com/exec/obidos/ASIN/B0025UGOVW/ref=nosim/youtube25-20
Great video...Thanks! I was a little surprised to find when I took my son's Mongoose BMX style bearing out there was no retainer for the bearing wheels. I've had this bike since we bought it new. Is that normal on some bikes? The cone seamed to organize the bearings in a uniform circle when I put it back together...but haven't seen anyone talking about bearings with no retainer.
@RJTheBikeGuy
6 жыл бұрын
Very common.
@Loudes012
2 жыл бұрын
Which are better, loose, caged, or sealed bearings?
I recently did this on two of my bmx bikes and 1 works perfectly and has a long spin time and the other has 3x less spin time. Did I overgrease or something? I made sure that the cones are not too tight and both bikes front wheel
@AngelAdrian563
6 жыл бұрын
FordGT489 could be your hub might just be fried just a thought
Thanks again for sharing your knowledge! I'm wondering, do most 20"inch bmx wheels require the same size (FR6) freewheel hub remover? My son has a 20inch mongoose bmx.
@RJTheBikeGuy
3 жыл бұрын
The tool is dictated by the freewheel, not the bike.
@williammoore7861
2 жыл бұрын
@@RJTheBikeGuy how many different options are there
@RJTheBikeGuy
2 жыл бұрын
@@williammoore7861 Lots.
Hi i didnt measure how much of my axle was sticking out on each side please advise me where i can find this information
@RJTheBikeGuy
4 жыл бұрын
Guestimate, then adjust so they are roughly even. Look at the other wheel axle.
Is this the same as a skyway or other mag wheels? Any difference? Thanks
@RJTheBikeGuy
7 жыл бұрын
There are tons of different wheels. The majority will be like this. Newer, higher end wheels might be different.
Would 20in bmx wheel bearings work for a 26in beach cruiser?
@RJTheBikeGuy
4 жыл бұрын
It doesn't work like that. It depends on what kind of bearing each of the hubs use.
slight play is still a major issue
@vonpffthausen
5 жыл бұрын
yeh he shoulda did some more "fine tuning"
I have a question. My brother's bike has similar bearings to what were in this bmx I would like to replace them with sealed bearings do I need to replace the hub to do that?
@fredgarvinMP
8 жыл бұрын
Yes.
@mr.mandudeguy5389
8 жыл бұрын
yea
My bmx bike does not have a easy removable hub or drive how take out un current hubs?
@RJTheBikeGuy
8 жыл бұрын
+DraZm BeatZ No idea what you are talking about. This is a non current hub. Cup and cone hubs like this go back long before BMX bikes.
Got a link for a full replacement of the hub if it’s rusted for 20 years?
@RJTheBikeGuy
4 жыл бұрын
Buy a used wheel. Or search ebay for hubs. But I am guessing you have never rebuilt a wheel, so I suggest buying a wheel.
Thanks , but can you do this without removing the freewheel??
@RJTheBikeGuy
8 жыл бұрын
No.
Would lithium grease be a suitable greaser? ive just cleaned and greased my front hub and used lithium grease because thats all i had.
@RJTheBikeGuy
9 жыл бұрын
gregormcclung I prefer marine grease. I think lithium grease is a lighter grease and won't do very well for the bearings.
@gregormcclung
9 жыл бұрын
RJ The Bike Guy Great, i did think it seemed a bit thin, ill get some of that and some new bearings. Thanks for your advice, really learned a lot from your videos.
@New777World
7 жыл бұрын
gregormcclung hey bike guy! is marine grease what you used in this video? or is there a better grease application for this hub job?
At what point would you replace the cones themselves?
@RJTheBikeGuy
5 жыл бұрын
When they show damage.
haha you kinda sound like Nicholas cage lol but great vid
His "aaand" tho :D
I know this is an older video, but any idea what brand of vise is being slid around on the tabletop? I could not find it on the tool page
@grumpyken9151
3 жыл бұрын
it is a drill press vise, to answer my own question. looked really handy for this type of repair!
@RJTheBikeGuy
3 жыл бұрын
Drill press vise from Harbor Freight.
@grumpyken9151
3 жыл бұрын
@@RJTheBikeGuy thanks!
I have a question so my mirrico when I go to pedal it allows me to but doesn't let me move I took the whole bike apart and when I pedal sometimes it will kinda skip what should I replace?
@RJTheBikeGuy
8 жыл бұрын
I have no idea what you are talking about.
@cgotthathit
8 жыл бұрын
It could be your bottom bracket or it could be the driver in your rear hub. My friend had the same issue.
Would you be able to give me some advice? I tried taking apart my bike tire because it was tight like the beginning of the video. I got it all put back.. but when I petel it's unscrews the back tire and get locked again... I took the back tires apart until I got to the ball bearings. I got everything back in. But idk where I went wrong.. Sorry it's alot of info. My main problem now. When I Pedel my bike, the bike tire unscrews until it's tight and won't move....
@g_dakid7767
3 жыл бұрын
The balls from the bearing were free roaming beneath the tires. Is that normal or are they broken?..
@RJTheBikeGuy
3 жыл бұрын
Sounds like you did something wrong. Can't tell you what without having worked on the bike.
👍👍👍👍👍👍👍👍👍👍
Where can I find cage bearings for rear free wheel hub of a 16 inch bicycle made by Framed bike company? Axle diameter is 14mm. Local bike shops couldn't help me. Or what would be your suggestion please?
@RJTheBikeGuy
4 жыл бұрын
Shrug. You need to match them. Those specs are no help. You need to find identical cages.
@praveensharma3456
4 жыл бұрын
@@RJTheBikeGuy got you. Thank you so much
can i change the wheel with freewheel hub to cassette hub.. or i need to buy new wheel with cassette hub on it?
@RJTheBikeGuy
4 жыл бұрын
If you completely rebuild the wheel with a new hub. www.amazon.com/exec/obidos/ASIN/B004H1UA9Y/ref=nosim/youtube25-20
RJ can any crappy spinning wheel be overhauled and lubed to say White Industries hub standard? I got some cheapo alex rims wheels with very rubby wheel bearings so I wonder if I should even bother to overhaul the dam thing.
@RJTheBikeGuy
5 жыл бұрын
Are you asking if you can install cartridge bearings in a hub not made for them. No you can't. Just overhaul the hubs.
@Justmyopinionlol
5 жыл бұрын
@@RJTheBikeGuy no I am asking if crappy factory wheels from big box vendors can be serviced to be as smooth as the bearings that normally come with white industries hubs...
@RJTheBikeGuy
5 жыл бұрын
I have not had white industries hubs. But if you are asking in Walmart bike wheels can be made as good as high end wheels, unlikely.
@Justmyopinionlol
5 жыл бұрын
@@RJTheBikeGuy I figured so. It´s probably 75% percent quality components and the rest in human assembly.
Is it possible to replace loose bearings with sealed bearings on a mongoose bmx?
@RJTheBikeGuy
3 жыл бұрын
If you replace the wheel.
@michalgt7203
3 жыл бұрын
@@RJTheBikeGuy Cant believe the price on the Wheels and other parts. Going to get my mongoose back together cheap as I can. I want to buy my old Schwinn Predator back!
Thanks I thought I was going to have to replace my entire rim on my bmx. I have a tri spoke (front and back) and the freewheel is stuck and will not stop pedalling when I move it.
@RJTheBikeGuy
8 жыл бұрын
+dajam9035 You can try cleaning and lubing the freewheel. kzread.info/dash/bejne/noqXk9Rrl8zXgMY.html
@0ngy697
8 жыл бұрын
Tri spoke?as interlacing?(bending them)
What's the name of that bike
Got any idea why my Rear hub keeps moving from side to side all the time ?
@RJTheBikeGuy
9 жыл бұрын
Marcus Isberg Yeah, the cones are not adjusted correctly. One of them is maybe loose. Overhaul the hub.
What was the tool used to remove the cone called?
@RJTheBikeGuy
8 жыл бұрын
+Jacob Patton A cone wrench.
can you get that tool you used to take the sproket or freeweal at auto zone o f Wal-Mart
@RJTheBikeGuy
7 жыл бұрын
Walmart sells it online. But your best bet it local bike shop, Amazon or eBay.
@pnw_manuel5099
7 жыл бұрын
What are they called
@RJTheBikeGuy
7 жыл бұрын
This is what I used in the video: www.amazon.com/exec/obidos/ASIN/B000AO9S68/ref=nosim/youtube25-20
my bmx driver is wobbly and my chain keeps skipping. What would be the problem?
@RJTheBikeGuy
3 жыл бұрын
I have not worked on your bike, so I can't say.
How do I do this without the free wheel removal tool
@donniebrown2019
6 жыл бұрын
screw driver and a hammer
@SkylerTauntsrandomstuff
6 жыл бұрын
donnie brown be spisific, not a smart ass
@BCHB-yh5co
6 жыл бұрын
Skyler Taunt he was specific, if you dont know how to do it with hammer and screwdriver then get proper tools
@jodycarlosborrageiro9588
5 жыл бұрын
@@BCHB-yh5co don't mind him.... He's TAUNTing you😂😂😂😂
Nice
would this work for any Hub as well? also how do you know if it needs to be overhauled will it not spin good?
@RJTheBikeGuy
9 жыл бұрын
Ivan Robles most older hubs are similar to this. Yeah, if it doesn't turn smoothly or is stiff, or even it the bike is older and it hasn't been done (grease dries out).
@miguelangelvalderrama1808
9 жыл бұрын
RJ The Bike Guy Everytime i disassemble my rear hub i find that the axle is bent so i go to the store to buy a new one , i install it and after 10 months when i need to grease the bearings i found this axle BENT again in the pinion side, my bicycle is a mountain bicycle . WHY?
@RJTheBikeGuy
9 жыл бұрын
Miguel Ángel Valderrama It could be you are buying poor quality axles. It could be you are are riding very rough. It could be you weigh too much for the bike. Maybe you are using pegs which are causing the axle to bend. It could be the dropouts are not aligned. kzread.info/dash/bejne/gqeJmqukm6nHn84.html
@leidyliduena9357
6 жыл бұрын
Ivan Robles
whats the zise of the bearing of my mongoose brawler bike , help please?
@RJTheBikeGuy
7 жыл бұрын
I don't know. Take them to a bike shop and have them match them. Or measure the balls in the cage, and replace the individual balls.
@discogoddess9196
7 жыл бұрын
Jesus Martinez omg the same thing just happened to me today with the same bike.
whats the name of that thing you used to put grease ?
@RJTheBikeGuy
7 жыл бұрын
www.amazon.com/exec/obidos/ASIN/B0025UGOVW/ref=nosim/youtube25-20
@clevelandcavaliers8619
6 жыл бұрын
a lot grease a lot better
👍👍👍👍👍🙏🏼
What Is the name of bolts you used there ?
@RJTheBikeGuy
7 жыл бұрын
What bolts?
Can you replace them with sealed bearings instead?
@RJTheBikeGuy
2 жыл бұрын
No.
@Jonathan00062
2 жыл бұрын
@@RJTheBikeGuy ok 👍 thanks
What kind of grease do you use
@RJTheBikeGuy
5 жыл бұрын
Marine grease.
@svt283
5 жыл бұрын
RJ The Bike Guy thank you
hi i have the same bike as you can you make a video how to remove the sprocket of this kind of bike. thanks.
@RJTheBikeGuy
8 жыл бұрын
+kirtan samadhi I remove the freewheel in this video starting at 1:14 into the video.
@punktsup
8 жыл бұрын
i mean the crank sprocket.
@RJTheBikeGuy
8 жыл бұрын
kzread.info/dash/bejne/c458xad9ia_HiMY.html
my bikes bearings didn't have cages and the beaeings kept falling out. I put them back but now the locknuts aren't going deep enough and now the wheel is too wide to fit in the bike :(
@0ngy697
8 жыл бұрын
Its easy if you put the wheel verticaly and start filling the top side then push the axle down so the bearings dont fall out and flip it then get a friend so he can thight up the top cone wile you hold the under one up.
@soundlesspeal
8 жыл бұрын
+/\/\0ngy too late
The fork is on backwards
what do you use to clean the treadings
@RJTheBikeGuy
8 жыл бұрын
Treadings?
@jahlonboodoo928
8 жыл бұрын
+RJ The Bike Guy yea the treadings in the hub because one side of mines not comin out
@RJTheBikeGuy
8 жыл бұрын
I have no idea what you are talking about. What are treadings?
@jahlonboodoo928
8 жыл бұрын
+RJ The Bike Guy 5:12 u had taken off the bolts on the hub but mines are not comin off
@RJTheBikeGuy
8 жыл бұрын
The cone and locknut. Just hold the cone with one wrench and turn the locknut counter clockwise with another wrench.
Not to be rude, just constructive criticism... You do know counter clock wise means the opposite of righty tighty right? Lol 11:34
Not everyone has fancy tools brah...back yard style?..🤔
@RJTheBikeGuy
5 жыл бұрын
If you don't want to buy the tools, you can always pay a mechanic who has the tools to do it.
@jasonwicks7491
4 жыл бұрын
Go to market or garage sales and pick up some old tools and grind the width down to suit 👍
its not a free wheel its a cuset hub or sproket excuse my spelling
@RJTheBikeGuy
8 жыл бұрын
kzread.info/dash/bejne/o5eb3JVmiNy0m6w.html
I bet that tire air you let out made your garage just smell amazing from that old bike 😂😂😂 I hate old tire air smell it’s so nasty 🤮
Wtf it's a free coaster?
@ep1379
7 жыл бұрын
No