Great video. I didn't have the problem getting the old bearing out, thankfully. Perfect teaching for someone who hadn't replaced wheel bearings before. Many Thanks.

@Brant_Moore

4 жыл бұрын

Hey thanks!! Glad to hear that you didn’t have troubles getting your bearing out as well. That can be a huge pain, as you saw. Haha

Thanks for the video. I just picked up a neighbors Miraaco bike from their trash. Rear hub is rusted. This vid will help me in removing and replacing both bearings.

@Brant_Moore

3 жыл бұрын

Let me know how it goes! Hope it’s a fun project for you too

Always nice to have a good reference video when working on the bike.

Thank you Brant Moore¡ Because of you, i successfully rebuilt my cheap wheel that no one is going to buy :')

@Brant_Moore

5 жыл бұрын

There you go man! Turn that wheel back into a new wheel again! Long as the ratchet ring and flanges are good, the hub can be made to look like new

Thanks loads bud, saved me a trip to the shop and some hard earned tokens

Thanks man best bearing replacement I have seen yet really helped me out thanks 😀😀

Really appreciate this video, especially the part of putting the pawls/springs back into the hub correctly. You bailed me out the night before a GCQ race, working on my Niece's bike, the rear hub came apart, had no idea what to do until I came across your great video. Been meaning to post something, finally got around to it. Thanks Again!!

@Brant_Moore

4 жыл бұрын

Hey thank you for letting me know it helps!!! Really really glad to hear I could help you get it back together!

Thank you young man. I’m a trained electro mechanical technician aka millwright, and used ya for a bit of reference. Great job

@Brant_Moore

3 жыл бұрын

Well that’s really awesome to hear! Thanks for letting me know!

Seriously well thought out, and explained. Thank you.

@Brant_Moore

5 жыл бұрын

You got it! Thanks for being here and enjoying it!

I appreciate you bringing the missing spacer part My hub was acting up all day because I took it apart but this video is very helpful I hope you succeed making more content and videos

@Brant_Moore

3 жыл бұрын

Heck yea glad to hear that it helped you!! And thank you, I do my best every day’

Very well made video. Great how-to for anyone who may need the knowledge.

@Brant_Moore

6 жыл бұрын

Thanks man!!! Glad it was of some use!

Thank you so much!Amazing video!

@Brant_Moore

4 жыл бұрын

Hope it helped!!!

Hell yeah this video was extremely helpful thank you man 👍

@Brant_Moore

4 жыл бұрын

Always happy to help! Thanks for the feedback too! Hope it was enough to earn your subscription

Thanks a bunch' I got alienation rim. I found out you hit it from the other side. Same concept tho.

Everything in this video is spot on! Try using a hammer that has weight, a Parktool HMR-4 with a plastic mallet is actually perfect for getting the job done without damage to components.

Profile doesn't grease or lube parts when installing trust me My maderas came with a tiny bit of surface rust due to no lube And storage and shipping humidity

A dead blow hammer is far superior to any other hammer for working on bikes. I got one and it makes everything so much easier and it doesn’t damage anything

@Brant_Moore

4 жыл бұрын

Can you explain what that is for me? I haven't heard of it before but that sounds really intriguing

@connersmith4104

4 жыл бұрын

Dead blow hammers have metal pellets inside that move around and when the hammer hits something, all the pellets go forward and create a dead blow. This allows the hammer to impact and not bounce back like a rubber mallet. If that doesn’t make sense there is quit a few good videos on how they work

@Brant_Moore

4 жыл бұрын

Conner Smith That makes 100% perfect sense man, thank you. That sounds like a really valuable tool to have!!!

I find it VERY USEFUL THANK YOU

@Brant_Moore

4 жыл бұрын

Happy to help!! Hope it helps enough to earn your subscription

What website has the best price for the bearing. Cuz I've been looking and I can't find it anywhere?? Anybody got an idea?

Best video I've seen ❤❤ thank you❤❤

You can use the axle it's self to seat the driver side bearing into the shell. Once the bearing is seated just pull the axle out, flip it around, install from the non driver side, reinstall and tighten hardware.

Very cool...thank you

I have a special freewheel, I dont know it can fit with your 9teeth racchet, I want you to see the photo of my freewhee and get your advice. can you help me?

After pressing my driver side bearing in I can’t get my driver out please help

I started the process of removing the rear axle. After removing the jam nut on the drive side, I notice another jam nut in the drive that is flat on two sides (round nut with two flat sides), what can use to remove that?

how do you change the bearings in the driver i need help with that

Love your videos man keep it up!!!!!

@Brant_Moore

6 жыл бұрын

Thanks buddy! Will do and lets ride soon so you can get some clips in one!

Mad how far these bikes are going. Wonder if they will evolve much from these bearings

Very helpful video, do u need to grease the driver or can u leave it degreased and make it loud?

@Brant_Moore

5 жыл бұрын

No grease on profile or Madera drivers. They’re designed to be used without. The only thing that could be done is a tiny dab of clear oil in the pockets where the pawls sit. Hope this helps enough to earn your subscription

Smart kid 👌

How do I remove a outer bearing race that is stuck in my bmx cassette? Please help

How can I get the rear rim off the frame when the coaster brake is locked up and the axle nuts are stripped????

@Brant_Moore

4 жыл бұрын

It sounds like you need some vice grips for those axle nuts. If you 100% can’t get them loose you may have to use a cut off wheel and cut them. Trying to avoid hurting the threads

1:23 I’m struggling so much no matter how hard I grip it, the axle spins with the nut

1:47 … so mine doesnt do that.(i don’t have the exact same hub but still similar) You just pulled the driver out like nothing, I’ve been tugging mine for ages and pulling it hard it still won’t come out

Great vid. I'm a dinosaur though, on my singlespeed DMR I still run a thread on freewheel. When the ratchet track eventually wears out I just unscrew it and screw a new one on. I get a long way out of my ACS freewheels as I strip and rebuild them once a year though I wonder what happens when the ratchet ring on a cassette hub wears? Can you get replacements? Can you fit them yourself? I learned a lot about cassette hub through this vid as I've never really tackled one. I had an Odyssey Hazzard cassette on my Standard Cashius back when 39/14 was the thing (showing my age again) but never needed to open it up.

@Brant_Moore

3 жыл бұрын

When a driver wears out, you have to buy a new one. This takes quite a long time though

I having trouble undoing my hub like those things won't come off

Sir please make a video how to remove the bearing inside of the driver, please thankyou

Noooice! 🤘🏾

@Brant_Moore

5 жыл бұрын

Thank you, I hope it helped!!

Great Tutorial! Thanks

@Brant_Moore

6 жыл бұрын

Thank you for being here to watch it!!

@572checo21

6 жыл бұрын

@Brant_Moore can you convert a bmx cassette hub that is unsealed into a sealed bearing hub??? Or do i have to buy a sealed hub as an only option....

@572checo21

6 жыл бұрын

I would like to know if you can explain if thats possible or not???

@Brant_Moore

6 жыл бұрын

I would very much doubt it, unless you have access to a machinist who can make the shell fit a sealed bearing. But even then the chances of it working are pretty slim. You’d be better off finding a used hub. I’ve seen used profile hubs sell for 40$ before

@Brant_Moore

6 жыл бұрын

I can’t say for sure whether or not it’s possible as I’ve never tried it. I don’t think it would be worth finding out if it’s possible or not

Stuck bro. What to do if you have female axle and the jam nuts are the rounded type ? I've recently started riding again and have never had to replace anything in a hub before. Thanks & peace out from the UK

@Brant_Moore

3 жыл бұрын

Send me a picture on Instagram and I’ll try to help you

Hey Brant! Love your professional approach to bmx tutorials, could you make a video on how to replace profile driver bearings? This procedure is quite scarce to find through youtube

@aidengregory9089

4 жыл бұрын

Also, the procedure for this is slightly different with the hubguard seeing as its a press-on not thread on hubguard

@Brant_Moore

4 жыл бұрын

I honestly have never done it and don’t know how. It seems like it would be pretty difficult

@aidengregory9089

4 жыл бұрын

@Brant_Moore ive done it myself a couple times, but each time has been quite difficult without an arbor press

My axle is snapped and the driver won’t just slide off any advice for that?

@Brant_Moore

3 жыл бұрын

Maybe you can use something to hit the axle/bearing out of the hub with the driver on since it’s broken. First though, is it broken on drive or non drive side

Does every hub have different bearing sizes?

@Brant_Moore

3 жыл бұрын

A lot of them do have different sized bearings

Bro how to remove does bearings from the driver?

@Brant_Moore

5 жыл бұрын

Honestly I’m not sure, it seems like it will be a huge pain

I bet this process is the same or similar for Profile Elite mtb hubs. Cool dude

@Brant_Moore

4 жыл бұрын

Yep exactly the same just more pawls and springs in the driver to keep track of.

hey does that bearing fit all hubs?

@Brant_Moore

5 жыл бұрын

I would have to guess that they dont all use the same bearings. You could find out what size bearing they use by contacting the company though

@genesisbaclayanto5318

5 жыл бұрын

@Brant_Moore ok thanks for your reply.. it is really sad that i can't ride my bike because the nearest bike shops are 2 hrs away from us.:( and i only have 3 dollars left.

I want to change my left hand drive to right handed on cassette.

This goes for all 9 tooth cassettes? Except the Walmart cheapo one.

@Brant_Moore

5 жыл бұрын

This is specific to profile and Madera cassette hubs. It may apply to some others but I haven’t tried any so I wouldn’t know or be able to recommend it for anything else.

Wait no oil or anything? What... Im new to this. Can someone explain

@Brant_Moore

5 жыл бұрын

Not in profile/madera rear hubs. They are designed to function dry. If you use anything, it should only be a tiny amount of clear oil on the pocket where the pawl sits so that it can move freely. Here is an article on their site that mentions it. www.profileracing.com/tech-tip-22-a-clean-hub-is-a-happy-hub/ Hope it helps enough to earn your subscription

How tf did you get the jam nut off with your hands, I can't even do it when I try putting both the axle nuts on the none drive side locking them and using a wench on the axle nut and another on the jam nut. It won't move one bit?

@Brant_Moore

4 жыл бұрын

I already had it loose or it was already broken loose before filming. Sometimes they’re on good

@tobymillard6289

4 жыл бұрын

@@Brant_Moore finally got it cheers man, best video out there for sure

@Brant_Moore

4 жыл бұрын

Good to hear! And thank you! I try my best

Is that a Profile elite hub

Really good job explaining the details.

Park tools hammer works good for that

@Brant_Moore

3 жыл бұрын

Agreed! Shout out to Park Tool!!!

When u put ur drive side bearing u can just use ur normal nuts by putting them the other side so it putt the bearing without doing any damage

it's recommended to grease or lube the pawls and spring..... not to let them dry af

@Brant_Moore

2 жыл бұрын

No, it’s not. Profile hubs are meant to not have grease in the pawls and springs. Look it up on profiles site👌🏼👌🏼

wery nice

@Brant_Moore

5 жыл бұрын

Hope it helped!!

👍🏼

❤🇵🇭 thank you

Can you use skate bored bearings ?

@Brant_Moore

5 жыл бұрын

Definitely not. They are a specific size.

Who is Binh Minh ToFu?

Seems like if you just sprayed the old bearing and both sides of the hub with disk brake cleaner and let it sit for 5-10mim. The old bearing would have come out a lot easier.

i can take the jam nut off cus the whole axel moves

took my bearing out in one it lol

Damn, good video.

@Brant_Moore

5 жыл бұрын

Thank you!! Hopefully it’s helped some people out

I watched 10+ videos, trying to figure out which way to flip that driver shim. I watched five videos from Profile and they still didn't explain it.

@Brant_Moore

25 күн бұрын

Do you still need help?

@chrisiglehart

24 күн бұрын

@@Brant_Moore I found what I needed in this video after 10+ videos from other accounts (4 from Profile). I appreciate the response and thank you for all of the helpful content.

@Brant_Moore

24 күн бұрын

@chrisiglehart Awesome, I’m glad to hear it was able to help you!!!

Damn didn't even CLEAN it properly ouch

but who has a press to remove these parts especialy?

@Brant_Moore

4 жыл бұрын

Not many people. That’s why I mention using a hammer

@Sam-yv3ou

4 жыл бұрын

@@Brant_Moore yeah but its pretty scarry doing it that way but when you got to fix it you got to find a way thanks for amswering me @Brant_Moore

No lubricant in the driver? Really?

@Brant_Moore

2 жыл бұрын

Yep yep. That’s Profile’s recommendation and always has been

Clean you wheel

No offense, you look like Jared Dines if he would’ve took up bmx instead of guitar

That's hub abuse

Le pega como nena obio que no va a salir el rule asi pa una bronca me da jajaja la con me voy dislike