My friend Trey stops by to get his rear hub repaired. Something is up with the hub and it needs to be rebuilt. Trey's Channel: / @treyridesbikes8992
Жүктеу.....
Пікірлер: 38
@Sumtin-kt4ltАй бұрын
love the video. just reaching the climax of the 2 nuts in a vice.. "Now All We Have To Do Is... i have the wrong wrench."
@user-cx2bk6pm2f Жыл бұрын
Some hubs on some frames need a bit of preload looseness. Then, once tightened into the frame the looseness goes away. Without this preload looseness the bearings are just too tight. Would be nice to address this topic, but still a good video.
@user-wb3ly4xd3o
10 ай бұрын
Calvin shows that in this video very well kzread.info/dash/bejne/h6ydmdmNgqrMirA.html. Not sure if its only related to Quick release, or also to these "bolt-tightened" axls.
@jamesedmerdelacruz94782 жыл бұрын
I think the purpose of the dust cover of the cone is to align the bearings perfectly than a cone without a dustcap, I notice this when I had a cone without a dustcap on the right while a cone with a dustcap on the left, as perfectly tighten those too I notice the right as a wobble.
@abeonthehill1662 жыл бұрын
Excellent explanation Man ! Thanks for sharing !
@TheTrueKailash5 ай бұрын
thanks, i have a road bike rear wheel to do so hoping this helps
@markwilson9635 ай бұрын
Thanks so much.
@iglesiabautistafundamental9995 Жыл бұрын
I need to replace 3 kids bikes 2 20in, and 1 26in rear axles for longer ones for training wheels, Do you have any idea what the thread size is for these to purchase new longer axles? 15mm outside diameter and I believe 10m inside but the 1 1.25 or 1.5 don't fit
@fredstone4159 Жыл бұрын
You might want to look up the difference between nuts and bolt it may give clearance to what you are saying
@AF1MIDS2 жыл бұрын
Whats Up Richard Nice To Meet You Brother. I Have A Mens And Womens Nishiki Pueblo bike From Dicks Sporting Goods And Would Like To Know What Ball Bearing System It Has If It Has Cartridge Bearing Systems And Adjustable “Cup-And- Cone” Bearing Systems Or A Different Type Of System And What Kind Of Hub It Has As Well Because The Website Doesnt Provide Much Specific Information Of The Components And Parts Installed On The Bike. I Really Want To Learn Bicycle Maintenance And Repair. If Your Able To Help Me Out With That I Will Greatly Appreciate It Very Much From The 💚🫂 Thank You And Have A Great Blessed Night Brother.
@SBATHORGOD Жыл бұрын
Can someone tell me what size that axle nuts please?
@Softballcrazy2 жыл бұрын
Dont think there should be a washer between the lock nut and cone
@OvelNick
2 жыл бұрын
It's the location where spacers would go so it's not really a big deal.
@nomarniram4176 Жыл бұрын
Since when do we just drop bearings in loosely like that? I must be way out of touch I guess.
@DiabloOutdoors Жыл бұрын
what is the magnet? I checked on Park tool's website and couldn't find it.
@richardsbikeshop5268
Жыл бұрын
It's their pick set. They have magnets on one end and I find them very helpful. They are also the most durable picks I've used.
With to much greese the balls push/ plow thru the greese instead of roiling around in it .
@ytrew9717 Жыл бұрын
someone on YT shows how to repair/resmoothed the cone (with simply a drill and a Dremel)
@ytrew9717
Жыл бұрын
this one kzread.info/dash/bejne/ZHiOzNVqcqvNlKw.html
@robertmcfadyen9156
11 ай бұрын
"All out bikes" - bicycle hub cone repair
@DKDonson4 ай бұрын
Xellent
@Zongshenfurshur7 ай бұрын
those are nuts not bolts. cmon man!!😂
@Dopeassbikevids Жыл бұрын
Those are called "nuts" there are no bolts.
@SBATHORGOD
Жыл бұрын
What size are those axle nuts? Please trying to buy online idk my size do I need for my mtb
@Dopeassbikevids
Жыл бұрын
@@SBATHORGOD I believe there 12 mm they are standard
@SBATHORGOD
Жыл бұрын
@@Dopeassbikevids what? 10m is the standard sir. What do you mean 12m is standard 😂 come on now
@brucemclachlin86832 жыл бұрын
Nuts are not bolts
@richardsbikeshop5268
2 жыл бұрын
haha. Sometimes I don't word good. haha
@magnumllama400
Жыл бұрын
What nuts nigga? Peanuts?
@magnumllama400
Жыл бұрын
The term nut is not scientific as it has a different meaning in food. Hardware should have their specific name and not be mixed with food so don't talk nigga
@nomarniram4176
Жыл бұрын
Just think of a penis with two nuts.😅 It's obvious what resembles the bolt.
@nomarniram4176
Жыл бұрын
@@richardsbikeshop5268Sometimes I don't word well.
@magnumllama400 Жыл бұрын
How do you true rotors?
@magnumllama400 Жыл бұрын
What if we don't have an axle vise and the locknut is so small it can't be grabbed by a normal bench vise?
@richardsbikeshop5268
Жыл бұрын
With a normal bench vice, you can easily grab the 15mm lock nut no sweat. This is what I normally use, not the axle vice.
Пікірлер: 38
love the video. just reaching the climax of the 2 nuts in a vice.. "Now All We Have To Do Is... i have the wrong wrench."
Some hubs on some frames need a bit of preload looseness. Then, once tightened into the frame the looseness goes away. Without this preload looseness the bearings are just too tight. Would be nice to address this topic, but still a good video.
@user-wb3ly4xd3o
10 ай бұрын
Calvin shows that in this video very well kzread.info/dash/bejne/h6ydmdmNgqrMirA.html. Not sure if its only related to Quick release, or also to these "bolt-tightened" axls.
I think the purpose of the dust cover of the cone is to align the bearings perfectly than a cone without a dustcap, I notice this when I had a cone without a dustcap on the right while a cone with a dustcap on the left, as perfectly tighten those too I notice the right as a wobble.
Excellent explanation Man ! Thanks for sharing !
thanks, i have a road bike rear wheel to do so hoping this helps
Thanks so much.
I need to replace 3 kids bikes 2 20in, and 1 26in rear axles for longer ones for training wheels, Do you have any idea what the thread size is for these to purchase new longer axles? 15mm outside diameter and I believe 10m inside but the 1 1.25 or 1.5 don't fit
You might want to look up the difference between nuts and bolt it may give clearance to what you are saying
Whats Up Richard Nice To Meet You Brother. I Have A Mens And Womens Nishiki Pueblo bike From Dicks Sporting Goods And Would Like To Know What Ball Bearing System It Has If It Has Cartridge Bearing Systems And Adjustable “Cup-And- Cone” Bearing Systems Or A Different Type Of System And What Kind Of Hub It Has As Well Because The Website Doesnt Provide Much Specific Information Of The Components And Parts Installed On The Bike. I Really Want To Learn Bicycle Maintenance And Repair. If Your Able To Help Me Out With That I Will Greatly Appreciate It Very Much From The 💚🫂 Thank You And Have A Great Blessed Night Brother.
Can someone tell me what size that axle nuts please?
Dont think there should be a washer between the lock nut and cone
@OvelNick
2 жыл бұрын
It's the location where spacers would go so it's not really a big deal.
Since when do we just drop bearings in loosely like that? I must be way out of touch I guess.
what is the magnet? I checked on Park tool's website and couldn't find it.
@richardsbikeshop5268
Жыл бұрын
It's their pick set. They have magnets on one end and I find them very helpful. They are also the most durable picks I've used.
@DiabloOutdoors
Жыл бұрын
@@richardsbikeshop5268 do you have the code?
@richardsbikeshop5268
Жыл бұрын
@@DiabloOutdoors www.amazon.com/Park-Tool-Utility-Pick-Set/dp/B00JXNZNHA/ref=mp_s_a_1_1_sspa?hvadid=410000987400&hvdev=t&hvlocphy=9052202&hvnetw=g&hvqmt=e&hvrand=11512230546114176482&hvtargid=kwd-97759404066&hydadcr=9382_11541747&keywords=park+tool+pick+set&qid=1681753170&sr=8-1-spons&psc=1&smid=AMY4I718ZUBOU&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFXT0QwQzRBUE1JVFUmZW5jcnlwdGVkSWQ9QTAzNTE1NDIzUlVWVFBZNUpFVTQ4JmVuY3J5cHRlZEFkSWQ9QTA2NzcyODMyOUQ4TTRBQTVBRjYyJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
With to much greese the balls push/ plow thru the greese instead of roiling around in it .
someone on YT shows how to repair/resmoothed the cone (with simply a drill and a Dremel)
@ytrew9717
Жыл бұрын
this one kzread.info/dash/bejne/ZHiOzNVqcqvNlKw.html
@robertmcfadyen9156
11 ай бұрын
"All out bikes" - bicycle hub cone repair
Xellent
those are nuts not bolts. cmon man!!😂
Those are called "nuts" there are no bolts.
@SBATHORGOD
Жыл бұрын
What size are those axle nuts? Please trying to buy online idk my size do I need for my mtb
@Dopeassbikevids
Жыл бұрын
@@SBATHORGOD I believe there 12 mm they are standard
@SBATHORGOD
Жыл бұрын
@@Dopeassbikevids what? 10m is the standard sir. What do you mean 12m is standard 😂 come on now
Nuts are not bolts
@richardsbikeshop5268
2 жыл бұрын
haha. Sometimes I don't word good. haha
@magnumllama400
Жыл бұрын
What nuts nigga? Peanuts?
@magnumllama400
Жыл бұрын
The term nut is not scientific as it has a different meaning in food. Hardware should have their specific name and not be mixed with food so don't talk nigga
@nomarniram4176
Жыл бұрын
Just think of a penis with two nuts.😅 It's obvious what resembles the bolt.
@nomarniram4176
Жыл бұрын
@@richardsbikeshop5268Sometimes I don't word well.
How do you true rotors?
What if we don't have an axle vise and the locknut is so small it can't be grabbed by a normal bench vise?
@richardsbikeshop5268
Жыл бұрын
With a normal bench vice, you can easily grab the 15mm lock nut no sweat. This is what I normally use, not the axle vice.
And true wheels?