Good video keep it up I love profile parts

@stuartgibson

4 жыл бұрын

Thanks!

That just got you a new sub. Nice vid. Ty

@stuartgibson

2 жыл бұрын

Thanks!

Might as well get the ti driver too if you're spend that kind of money right?

@stuartgibson

4 жыл бұрын

If you think it’s worth spending the extra money and you are able to spend it. It is cheaper when you order the hub brand new with a ti driver instead of doing the whole upgrade thing at a later stage.

Is there a break in period on the Hubs . I just got my wheel set from profile and I feel they don't spin as freely as I thought they would

@stuartgibson

2 жыл бұрын

Doesn't take long at all tho. Keep in mind that because of the amount of pawls in the hub there is more resistance and it will make it slow down quicker than some other hubs. No point in comparing them, just enjoy them!

hey I have a question about the button head bolts for the elite cassette and for the elite front hub. Do they both use the same button head bolt? And do I need to get the 3/8 to 14mm one or can i use the regular 3/8?

@stuartgibson

3 жыл бұрын

Good question! Yes the front and the rear use the same bolts. You can use regular 3/8 in the cassette however, as your frame (extremely likely) has 14mm dropouts you will need to use spacers to fill in the gap. A 3/8 to 14mm bolt does that already so that's what I'd recommend. Do note that if you plan on riding pegs with the 3/8 to 14mm bolt that they have a specific peg bolt that has a longer 14mm section.

@marklee7769

3 жыл бұрын

@@stuartgibson thanks a lot man profile does a shitty job explaining which bolts you will need

@stuartgibson

3 жыл бұрын

@@marklee7769 I agree, they could educate a bit better about all the different bolt options

Subscribed!!!

@stuartgibson

3 жыл бұрын

Thank you!

I've been building a dirt jumper/trail rider. Do you recommend buying a Profile for trail riding?

@stuartgibson

3 жыл бұрын

Absolutely! They are awesome for trail riding. Maybe a bit loud, but I like that

There is one hub for BMX (racing) that has better engagement. Profile Elite was once 120 points for three degrees. Now, it's 204 points for around a degree and a half. Onyx Stealth has I don't know how many points, but it's true zero degrees. But, it's heavy and silent.

@stuartgibson

3 жыл бұрын

So it seems there is a trade off in engagement and weight of a hub. Would you consider the Elite to be a more popular hub in racing or a more overall better spec’d hub than Onyx Stealth?

@devildoglcpl

3 жыл бұрын

@@stuartgibson what I said about the Onyx is really all I know. I do know that the Profile is more dominant on the track than the Onyx. I assume that is due to weight and sound. People love that sound. I also know that the Answer Holeshot and the Box Harmonic are now what what profile used to be. 6 pawls, 120 points, 3°. Me personally, I am a profile fanatic.

@stuartgibson

3 жыл бұрын

Awesome, I am very unfamiliar with racing so it’s cool to learn about it. I’m also a big Profile fan myself!

@booboo_n

3 жыл бұрын

The Onxy hubs are not the same as the stealth hubs. They are similar but have different drive mechanics. Onxy hub used a sprag clutch. The True Precision(now Box components) stealth hub uses a one way roller bearing. They both have instant engagement and both are silent. Both offer less drag than a conventional driver with pawls. The Onxy is also the most expensive bmx hub on the market at around $550usd.

Yea ima put this on my durt jumper

@timcastro7766

3 жыл бұрын

Was so sure I didn’t need it just 2 min ago was set on getting the mini for my trail boss,, listening to this video.. well it’s only 350 fuck it

@stuartgibson

3 жыл бұрын

I love Profile hubs in general, but yes I chose the Elite to be on my personal bikes for a reason too! It's just so good!

hey man I came across another problem. I have the hubs and the rims but when it came to spokes I came across something that I have never seen before. When i put the spokes into the hub they were super tight and won't move when they are inside the hub. Why is that? Do I need to get specific spokes for the elites? I know the length and everything but I can't lace them due to the flanges squeezing the spokes really really tight.

@stuartgibson

3 жыл бұрын

Hey Mark, the Elite does not need specific spokes. I think almost all BMX wheels use 14 gauge spokes. Maybe you have 13g ones? They are thicker. Are you using polished spokes or colored ones? I’ve seen some thick paint on spokes before that made them super tight inside the hub. Just know that with the issue you describe 99% of the time it’s an issue with the spokes and not the hub.

@marklee7769

3 жыл бұрын

@@stuartgibson okay thanks man. I have polished spokes but I don't know if they are 14 gage. do u have 14 gage for that wheel?

@stuartgibson

3 жыл бұрын

Yup 14 gauge for all my BMX wheels

Hey buddy, i really want this hub hiping to get nxt month but still doubting if it can hold an abuse in pure street riding?

@stuartgibson

3 жыл бұрын

Thanks for the question! Yes it would hold up, but for pure street riding I’d go for a 14mm male axle and a hub guard

@Jofiljamez_05

3 жыл бұрын

@@stuartgibson thanks bro.. More powers 💪💪💪

What size of spokes you need in that elite hubs?

@stuartgibson

2 жыл бұрын

Depends on the rim you want to match up with it!

Would it be safe to run 4 pegs with this hub?

@stuartgibson

4 жыл бұрын

Well just like every other hub, if you plan on having a 14mm axle and hub guards then yes go for it! Female axles with profile hubs are less recommended because of the aluminum inner axle. I think they have steel upgrades for that too if you really want to stick to female axles.

@maxziemer5932

4 жыл бұрын

Stuart Gibson awesome thanks!

Love from India 🇮🇳

@stuartgibson

3 жыл бұрын

Thanks man! 🙏🏻

Very similar To Eastern Birectional Program but the pawls of This Hub is bigger than Birectional .

is the nut 17mm?

@stuartgibson

3 жыл бұрын

Yes sir correct!

So you did not mention if you purchased with the upgrades or not.

@stuartgibson

7 ай бұрын

I didn't purchase the hub at all in this case, but I buy a titanium axle for it followed by a titanium driver a few months later

If you where after a hub almost as good as the profile elite but a little but cheaper what would you recommend?

@stuartgibson

4 жыл бұрын

Good question! If we are sticking to hubs that have direct engagement I’d say the Tall Order Drone hub. Especially now they offer replacement parts if you were to need any.

@escapetrekkingadventures3759

4 жыл бұрын

@@stuartgibson thanks it's for a race bmx bike (cruiser old blokes lol)

Hi im new user it's this hub can used for gt vertigo bmx.....

@stuartgibson

3 жыл бұрын

I guess so yes, but considering the price of the hub compared to the bike itself, I’d go for something else or maybe upgrade to a higher end complete

So eargasm.. 😄 Is that strong enough for professional street riders?

@stuartgibson

2 жыл бұрын

14mm axle and hub guards! Works great

Great video 👍 bro 👊 what would u do with your old rim

@stuartgibson

4 жыл бұрын

Thank you! I have multiple bikes so my 'old' wheels have gone towards those builds.

@manny_bmxcruz766

4 жыл бұрын

@@stuartgibson I understand completely bro bike life!

Could someone solve my doubt? I'm thinking of buying that hub and would like to know if it can withstand the rails using a chromoly axle. I hope you can solve my doubt

@stuartgibson

5 ай бұрын

If you go for the male axle and use a hubguard, then yes it withstands rails just fine

@Morty_C137smith

5 ай бұрын

@@stuartgibson thank you very much for responding brother, I don't speak English very well and it was difficult for me to understand the subtitle of the video. Thanks in advance!

What spokes?

@stuartgibson

4 ай бұрын

I have titanium spokes

how i can buy this?

@stuartgibson

Жыл бұрын

Ask about it at your local bike store, or find an online bmx store in your country. They should be able to help you!

@user-ee6ql9fg7t

Жыл бұрын

@@stuartgibson thanks though i already saw i can get one on sourcebmx

That sounds scary

@stuartgibson

Жыл бұрын

Sounds cool to me!

@JP-pl9mv

Жыл бұрын

@Stuart Gibson I have profile elites on my Bassett and it sounds wicked

Link?

@stuartgibson

3 жыл бұрын

Link to what?

The industry nine hub torch hub has 690 points of engagement

@stuartgibson

3 жыл бұрын

Correct! But that is a MTB specific hub tho!

@sorinvladu7021

3 жыл бұрын

That's a mountain bike hub

more points of engagement is not a good thing. G Sport made a hub with infinite points of engagement (clutch bearing) and it was very hard to ride. Like 20 years ago.

@stuartgibson

4 жыл бұрын

I’m not familiar with that Gsport hub! I agree it is not always better but as far as engagement points on the Elite hubs go, I like them. It’s all just preference of the rider really

@meocats

3 жыл бұрын

@@stuartgibson no one could ride it, if people could ride taht thing it would have sold

Can i beg for that cassete because i dont have enough money to buy it and here in Philippines we dont have shop to buy profile elite hub

@stuartgibson

3 жыл бұрын

Edwarren Jay Libardo Chavez Profile Elite hubs are very expensive everywhere. I consider myself lucky to have one! This is my personal wheel in my current bike.

@edwarrenjaylibardochavez8088

3 жыл бұрын

Ahhhh Okay Sir Im Sorry😅 now i know Why Here in Philippines we don't have shop of Profile because its so expensive Thankyou For that information sir i didn't expect that Profile Elite Hub is Expensive Thankyouu so much sirrrr And thankyou verymucchhhh because you always reply me on my comments💕💕💕

@edwarrenjaylibardochavez8088

3 жыл бұрын

@@stuartgibson Hmm sir im sorry for my comment i think it's form of insult 😢

@stuartgibson

3 жыл бұрын

Edwarren Jay Libardo Chavez no problem man!

look at that guy backpedal. lol

Why are you even cutting your axle?

@stuartgibson

2 жыл бұрын

Axle to the leg hurts

how much is that?

@stuartgibson

4 жыл бұрын

Dyankarl xzx depends what part of the world you are in

@jeysibonak3428

4 жыл бұрын

@@stuartgibson can i have one?

@stuartgibson

4 жыл бұрын

Dyankarl xzx bet any store will let you have one if you bring them enough money

Nah BULLSEYE for life