We test a Bandit SG75 Stump Grinder and show you some of the features in the real world contact info Mustangrebuilder@gmail.com
Жүктеу.....
Пікірлер: 29
@matthewkunz5173 Жыл бұрын
Only hear good things about these units. Big cut area, tracks go in to fit through gates. Brilliant.
@RobertHiggins-gv5jc13 күн бұрын
Chips All end up on the track's and The whole center it makes a mess I had this machine had it for six months and sold it and bought rayco 74 it has it all over this one....
@mikepetronio927 Жыл бұрын
I have one and I love it great mechanic
@mustangrebuilder
Жыл бұрын
And where were you when I needed you LOL ... Have a fantastic Sunday brother
@mikesorg6746 Жыл бұрын
I almost pulled the trigger on one of these but now I’m working a deal on a 2550 with my dealer.
@jonzimmerman926
Жыл бұрын
Don't get the 2550. Watch videos of the 2550 grinding. You will notice the same thing.. It bogging down during the grind.
@christophermason7268 Жыл бұрын
Another great video Adam. Quick question I’m running the SG40 would you recommend green teeth or the new Revolution wheel?
@mustangrebuilder
Жыл бұрын
Whats the area like ? a lot of rocks if so New River if not green they cut faster but New River are stronger with rocks and metal like landscape edging
@4EverMoore
Жыл бұрын
Glad I got into the habit of putting the travel pin into the tow behind units, now its second nature with the self propelled units🤘🐺🤘
@danahasson2892 Жыл бұрын
It's only Monday Adam.
@mustangrebuilder
Жыл бұрын
Sometimes its Monday everyday.. delivering it back to dealer tomorrow morning
@stumpintom23 Жыл бұрын
Hey Mustangrebuilder! I have an sg40 and my dealer told me to put the power head down on a rubber mat when trailering to prevent the head swinging side to side and affecting the swing cylinder. Would you agree with this?
@mustangrebuilder
Жыл бұрын
On the sg40 their should be a place for the travel pin to go into
@mustangrebuilder
Жыл бұрын
I will ck for an exact answer
@stumpintom23
Жыл бұрын
Right on thanks!
@mustangrebuilder
Жыл бұрын
Send me an email mustangrebuilder@gmail.com factory sent me pictures
@mustangrebuilder
Жыл бұрын
Factory sent me a picture for you so just email me and I will send it
@MzVirtue7 ай бұрын
Looking for troubleshooting tips with the remote. It stopped communicating. SG75
@mustangrebuilder
7 ай бұрын
From what I have seen is a loose wiring harness connection problems and make sure remote is charged
@MzVirtue
7 ай бұрын
@@mustangrebuilder Thank you! Just gonna take it in tomorrow. Thank you for the response!
@penguinistas9 ай бұрын
What are the "bump time" buttons for at 24:50 ?
@mustangrebuilder
9 ай бұрын
forward bumps .... I will have to admit Im not a remote guy LOL
@jonzimmerman4277 ай бұрын
Why don't you sit the head down while traveling? Why leave it up in the air?
@mustangrebuilder
7 ай бұрын
You could but we were testing and getting use to the machine
@mikemason31487 ай бұрын
I have a question that I would like to ask through a personal email...etc.
Пікірлер: 29
Only hear good things about these units. Big cut area, tracks go in to fit through gates. Brilliant.
Chips All end up on the track's and The whole center it makes a mess I had this machine had it for six months and sold it and bought rayco 74 it has it all over this one....
I have one and I love it great mechanic
@mustangrebuilder
Жыл бұрын
And where were you when I needed you LOL ... Have a fantastic Sunday brother
I almost pulled the trigger on one of these but now I’m working a deal on a 2550 with my dealer.
@jonzimmerman926
Жыл бұрын
Don't get the 2550. Watch videos of the 2550 grinding. You will notice the same thing.. It bogging down during the grind.
Another great video Adam. Quick question I’m running the SG40 would you recommend green teeth or the new Revolution wheel?
@mustangrebuilder
Жыл бұрын
Whats the area like ? a lot of rocks if so New River if not green they cut faster but New River are stronger with rocks and metal like landscape edging
@4EverMoore
Жыл бұрын
Glad I got into the habit of putting the travel pin into the tow behind units, now its second nature with the self propelled units🤘🐺🤘
It's only Monday Adam.
@mustangrebuilder
Жыл бұрын
Sometimes its Monday everyday.. delivering it back to dealer tomorrow morning
Hey Mustangrebuilder! I have an sg40 and my dealer told me to put the power head down on a rubber mat when trailering to prevent the head swinging side to side and affecting the swing cylinder. Would you agree with this?
@mustangrebuilder
Жыл бұрын
On the sg40 their should be a place for the travel pin to go into
@mustangrebuilder
Жыл бұрын
I will ck for an exact answer
@stumpintom23
Жыл бұрын
Right on thanks!
@mustangrebuilder
Жыл бұрын
Send me an email mustangrebuilder@gmail.com factory sent me pictures
@mustangrebuilder
Жыл бұрын
Factory sent me a picture for you so just email me and I will send it
Looking for troubleshooting tips with the remote. It stopped communicating. SG75
@mustangrebuilder
7 ай бұрын
From what I have seen is a loose wiring harness connection problems and make sure remote is charged
@MzVirtue
7 ай бұрын
@@mustangrebuilder Thank you! Just gonna take it in tomorrow. Thank you for the response!
What are the "bump time" buttons for at 24:50 ?
@mustangrebuilder
9 ай бұрын
forward bumps .... I will have to admit Im not a remote guy LOL
Why don't you sit the head down while traveling? Why leave it up in the air?
@mustangrebuilder
7 ай бұрын
You could but we were testing and getting use to the machine
I have a question that I would like to ask through a personal email...etc.
@mustangrebuilder
7 ай бұрын
mustangrebuilder@gmail.com