Wow! Nice grinder that and a pull behind lift would be a god send! Also hitting the power ball to pay for it all lol 😂
@deborahmann9612 күн бұрын
🐜 Ants That won't go up your pants 😂🐜🐜🐜🐜🐜🎶🖤
@mustangrebuilder2 күн бұрын
They did
@b4its2l832 күн бұрын
Good advice. I'm thinking buying a stump grinder and starting a small side business. I was thinking of starting with a walk behind self-propelled do you have any comments or advice ?
@mustangrebuilder2 күн бұрын
The old rayco 20hp unit or the old vermeer 252
@b4its2l832 күн бұрын
@@mustangrebuilder Yeah...I am looking at that vermeer. Thanks !
@jackgreen63532 күн бұрын
I named my grinder the stump slut... she gets around lol
@mustangrebuilder2 күн бұрын
LOL
@mikesorg67463 күн бұрын
It always said to start the cutter head on low idle but I’m curious. After you have been grinding for a bit will you start and stop your wheel at full rpm to save time, and have you noticed any issues in doing so?
@mustangrebuilder2 күн бұрын
Never had a problem with newer pumps
@jackgreen63532 күн бұрын
1000+ hrs on a sg 40 haven't seen any problems yet, doing it here and there not all the time
@penguinistas3 күн бұрын
Oww
@zapblamvern23173 күн бұрын
Thats hot. I was going to say ya wussie but I am dying here at 95.
@pmoff9143 күн бұрын
Very sorry for you (and his family's) loss.
@jonathonmcdavitt924 күн бұрын
Looks like termites
@penguinistas4 күн бұрын
The critters that I worry about are bees and wasps.
@mustangrebuilder4 күн бұрын
Or ants that get up my pants and bit my you know what lol
@user-wr8yl6hq7s4 күн бұрын
Thanks for all you do!! I’m new to the business I started this year. I bought a used 252 then had to replace engine. Then this weekend I had 70+ stumps and almost done with job and I think my bearings went out I know my belt was slipping. Should I take to shop or replace bearings and anything else that went bad myself. I have a full upcoming week so hopefully I can get it done quick.
@mustangrebuilder4 күн бұрын
If you have the tool go it and face book has the best page just for 252's and the guys are great for parts locations
@WhiskeyDents4 күн бұрын
Cool idea
@mustangrebuilder4 күн бұрын
Thanks!
@sethmeashey32194 күн бұрын
Damn sorry Adam. May he rest in peace.
@darwindropmazda5 күн бұрын
Congratulations to the winner and your son Adam! I know it’s been a tough week but I know you will grind right thru it 🫡
@mikesorg67465 күн бұрын
Hey Adam, don’t let the hard times win. I hope next week it much better for you and the family and keep grinding.
@JDMJACOB16 күн бұрын
Sorry for your loss. Rest in peace Oscar
@toddkellerman74066 күн бұрын
Rip Oscar God bless you 😢🙏🏻🙏🏻❤
@Thelooch6 күн бұрын
It was good to see you today. Thanks for helping me clean up the backyard. Sorry to hear all about this .take care. I’ll see ya around.
@mustangrebuilder6 күн бұрын
Thanks my friend and you know I cant stand around and watch you work LOL
@ronallen59576 күн бұрын
I'm sorry for your loss. I'll say a prayer for his family. Have a great day, Ron
@meohmy4207 күн бұрын
I like the other one that looks similar to this one they don't make anymore i believe, that has the pusher on the opposite side of the grinder. Man oh man I had no clue how to engage the wheel for the longest time on a job site and called me boss and he's like there's a switch Ken, in like yes but this damn thang ain't moving.... Safety 1st lol had to move it up 1st before you could engage the switch from side to side
@wewillsurviveone7 күн бұрын
That's a bad ass grinder. Is everything hydraulic on it?
@mustangrebuilder6 күн бұрын
Yes no belts
@AnonMedic7 күн бұрын
Thank you for your service
@lonestar85777 күн бұрын
Keep up the good work that machine is a business it self. One customer at a time good work gives referrals.
@fredpesant7 күн бұрын
Happy Saturday 😊
@mustangrebuilder7 күн бұрын
Same to you!
@fredpesant7 күн бұрын
I clicked thumbs up, but its a horrible sad story. If it would have been a heart attack this guy would probably had more chance with you around Adam!! I’m pretty sure you did whatever you could as an ex firefighter. God bless you
@mustangrebuilder7 күн бұрын
I am still feeling the pain because I knew him well
@fredpesant7 күн бұрын
Damn it, so sad!!! Am I wrong to hear you already post a similar video in the past? So sorry for this guy and family 😢
@mustangrebuilder7 күн бұрын
It's my second time in 20 years being on site and the climber was killed and I was doing cpr on him
@comrade_macek70597 күн бұрын
They're with you forever ❤, don't forget that man.
@TheFewmr28 күн бұрын
Nice unit!
@fredpesant8 күн бұрын
Those are a pain to get rid of 😮
@penguinistas8 күн бұрын
Sorry to hear that.
@mustangrebuilder8 күн бұрын
Thanks my friend
@darwindropmazda8 күн бұрын
Sorry you had to go thru that. Prayers and condolences to his family 🙏🏾
8 күн бұрын
Sorry for your loss
@paulalarcon59799 күн бұрын
Just got one for my Bday can't wait to use it!
@mustangrebuilder9 күн бұрын
Happy birthday!
@paulalarcon59799 күн бұрын
@@mustangrebuilder thank you very much!
@rockman49er10 күн бұрын
I just hot a vevor welding table on sale on Amazon for 109 bucks and it came with the same mods you did already however it didn't come with any accessories so I'm making my own clamps out of harbor freight clamps 😮
@chriskrenik739010 күн бұрын
I sure dO like your stump grinder videos, I've learned SO much from you Adam in the last couple of years. Thank you!
@mustangrebuilder10 күн бұрын
I appreciate that!
@chriskrenik739010 күн бұрын
Please keep going with the stump grinding videos Adam!
@mustangrebuilder10 күн бұрын
You got it!
@diederik_theo11 күн бұрын
I do so many tight access grinds with my SG40 (which honestly is what this machine was made for) that I literally threw my guard in the scrap bin, I just functionally cannot run my small business with it on the machine. My work is largely urban in the greater Detroit area.
Adam, this Mustang is starting to look good. I was hoping seeing you purge the old fuel. As we know, old fuel will never really work.
@JerryMckelvey11 күн бұрын
I enjoy your videos and Thank You for sharing them with us. I would like to ask you a question. When you grind a stump and the home owner is going to use that area to extend their driveway using concrete, do you need to remove the stump completely or can you just grind the stump down several inches below the ground. Thank You in advance for your response. Jerry
@mustangrebuilder11 күн бұрын
Concrete guy should remove all and compact gravel bed
@JerryMckelvey11 күн бұрын
@mustangrebuilder Thank You Sir.
@franturner633511 күн бұрын
Adam, great video. Uproots take time and mythological technics to do safely. Keep’m coming brother. Fran
@mustangrebuilder11 күн бұрын
Absolutely!
@beotaxi11 күн бұрын
Just discovered your channel the other day when I was looking for tips for new guys. Very similar situation with full time work but lot of down time. Similar age as you, speaking of which, how is this business on your back and lower back please? Thanks for uploading.
@mustangrebuilder11 күн бұрын
I destroyed my body years ago in a house fire and I used to own a tree service but was able to switch over to my grinding and still doing it at age 63
@beotaxi10 күн бұрын
@@mustangrebuilder , thanks for the encouragement. I'm practically a toddler at 59. LOL.
@Paul-bt2nk11 күн бұрын
Keep up the good work. Love the advice.
@mustangrebuilder11 күн бұрын
Appreciate it!
@4EverMoore12 күн бұрын
I used to feel the same way with the tripod so now I have a mount on my gear so it's just another set of hands 👍 keep up the good work
@matthewkunz517312 күн бұрын
Use that saying all the time with the 252. How do you eat an elephant.
Пікірлер
my town
Wow! Nice grinder that and a pull behind lift would be a god send! Also hitting the power ball to pay for it all lol 😂
🐜 Ants That won't go up your pants 😂🐜🐜🐜🐜🐜🎶🖤
They did
Good advice. I'm thinking buying a stump grinder and starting a small side business. I was thinking of starting with a walk behind self-propelled do you have any comments or advice ?
The old rayco 20hp unit or the old vermeer 252
@@mustangrebuilder Yeah...I am looking at that vermeer. Thanks !
I named my grinder the stump slut... she gets around lol
LOL
It always said to start the cutter head on low idle but I’m curious. After you have been grinding for a bit will you start and stop your wheel at full rpm to save time, and have you noticed any issues in doing so?
Never had a problem with newer pumps
1000+ hrs on a sg 40 haven't seen any problems yet, doing it here and there not all the time
Oww
Thats hot. I was going to say ya wussie but I am dying here at 95.
Very sorry for you (and his family's) loss.
Looks like termites
The critters that I worry about are bees and wasps.
Or ants that get up my pants and bit my you know what lol
Thanks for all you do!! I’m new to the business I started this year. I bought a used 252 then had to replace engine. Then this weekend I had 70+ stumps and almost done with job and I think my bearings went out I know my belt was slipping. Should I take to shop or replace bearings and anything else that went bad myself. I have a full upcoming week so hopefully I can get it done quick.
If you have the tool go it and face book has the best page just for 252's and the guys are great for parts locations
Cool idea
Thanks!
Damn sorry Adam. May he rest in peace.
Congratulations to the winner and your son Adam! I know it’s been a tough week but I know you will grind right thru it 🫡
Hey Adam, don’t let the hard times win. I hope next week it much better for you and the family and keep grinding.
Sorry for your loss. Rest in peace Oscar
Rip Oscar God bless you 😢🙏🏻🙏🏻❤
It was good to see you today. Thanks for helping me clean up the backyard. Sorry to hear all about this .take care. I’ll see ya around.
Thanks my friend and you know I cant stand around and watch you work LOL
I'm sorry for your loss. I'll say a prayer for his family. Have a great day, Ron
I like the other one that looks similar to this one they don't make anymore i believe, that has the pusher on the opposite side of the grinder. Man oh man I had no clue how to engage the wheel for the longest time on a job site and called me boss and he's like there's a switch Ken, in like yes but this damn thang ain't moving.... Safety 1st lol had to move it up 1st before you could engage the switch from side to side
That's a bad ass grinder. Is everything hydraulic on it?
Yes no belts
Thank you for your service
Keep up the good work that machine is a business it self. One customer at a time good work gives referrals.
Happy Saturday 😊
Same to you!
I clicked thumbs up, but its a horrible sad story. If it would have been a heart attack this guy would probably had more chance with you around Adam!! I’m pretty sure you did whatever you could as an ex firefighter. God bless you
I am still feeling the pain because I knew him well
Damn it, so sad!!! Am I wrong to hear you already post a similar video in the past? So sorry for this guy and family 😢
It's my second time in 20 years being on site and the climber was killed and I was doing cpr on him
They're with you forever ❤, don't forget that man.
Nice unit!
Those are a pain to get rid of 😮
Sorry to hear that.
Thanks my friend
Sorry you had to go thru that. Prayers and condolences to his family 🙏🏾
Sorry for your loss
Just got one for my Bday can't wait to use it!
Happy birthday!
@@mustangrebuilder thank you very much!
I just hot a vevor welding table on sale on Amazon for 109 bucks and it came with the same mods you did already however it didn't come with any accessories so I'm making my own clamps out of harbor freight clamps 😮
I sure dO like your stump grinder videos, I've learned SO much from you Adam in the last couple of years. Thank you!
I appreciate that!
Please keep going with the stump grinding videos Adam!
You got it!
I do so many tight access grinds with my SG40 (which honestly is what this machine was made for) that I literally threw my guard in the scrap bin, I just functionally cannot run my small business with it on the machine. My work is largely urban in the greater Detroit area.
SC382 💪
🇺🇸💪✊️✊️✊️
You won the T shirt send info to [email protected]
Blow downs are always a shit show. Great work 💪
Thanks brother
Adam, this Mustang is starting to look good. I was hoping seeing you purge the old fuel. As we know, old fuel will never really work.
I enjoy your videos and Thank You for sharing them with us. I would like to ask you a question. When you grind a stump and the home owner is going to use that area to extend their driveway using concrete, do you need to remove the stump completely or can you just grind the stump down several inches below the ground. Thank You in advance for your response. Jerry
Concrete guy should remove all and compact gravel bed
@mustangrebuilder Thank You Sir.
Adam, great video. Uproots take time and mythological technics to do safely. Keep’m coming brother. Fran
Absolutely!
Just discovered your channel the other day when I was looking for tips for new guys. Very similar situation with full time work but lot of down time. Similar age as you, speaking of which, how is this business on your back and lower back please? Thanks for uploading.
I destroyed my body years ago in a house fire and I used to own a tree service but was able to switch over to my grinding and still doing it at age 63
@@mustangrebuilder , thanks for the encouragement. I'm practically a toddler at 59. LOL.
Keep up the good work. Love the advice.
Appreciate it!
I used to feel the same way with the tripod so now I have a mount on my gear so it's just another set of hands 👍 keep up the good work
Use that saying all the time with the 252. How do you eat an elephant.
Great work Adam!
Thanks!
Bras