I really like the simple light weight design of these I really got a lot of inspiration from your teaching, Thank you.

@Jamila1992

8 ай бұрын

Thank you for your comment. Happy to hear!

Thank you so much for sharing your technique -- my kid needs a costume that can be worn to school and PVC seems pretty safe and lightweight.

@CreativeChaosCostumes

4 жыл бұрын

No problem! It really is, I love pvc. For a kids costume I just wouldn't cut the points on the top and bottom ;)

Although I didn’t exactly copy yours I found your tutorial the most helpful 🙃and I went through at least 15 tutorials, also I really love how you replying to everyone 😛

@CreativeChaosCostumes

3 жыл бұрын

I am very happy to hear that! Glad it was helpfull and that you made it your own 😄 Haha, thank you. I don't get too many comments, so I still manage to reply to every comment that I see

@Zara-ZAF

8 ай бұрын

Can u share your wings picture

Thank you so much! Very good tutorial! I also love that you just sat on stuff, I do that too :P

@CreativeChaosCostumes

5 жыл бұрын

You're welcome! Happy it was helpfull :D Hahaha, keeping it real. My butt is the best fabric weight ;p

You are very innovative!

@CreativeChaosCostumes

5 жыл бұрын

Thanks! Being a bit of a cheapskate demands some creativity ;p

I like how different these are to the wings that I made for my fairy costume, but some of the base principles are the same ^^ It looks truly amazing & I loooooove your dragon lady outfit :D

@CreativeChaosCostumes

4 жыл бұрын

You can make so many changes to the base principle to get different wings. Possibilities are endless! Thank you!!

WOW! These are amazing!

@CreativeChaosCostumes

5 жыл бұрын

Thank you :D

It looks like an enderdragon, and ive been looking for something to make an enderdragon costume for a bit, this looks great :D

@CreativeChaosCostumes

3 жыл бұрын

Sounds awesome! Happy to be of inspiration ☺️

Can't watch the whole thing at the moment, but loving what I've seen so far! Will definitely be taking notes, as I want to do a Gijinka Charizard in the near future ^_^

@CreativeChaosCostumes

4 жыл бұрын

Thank you! Hope it will be helpfull :D These would look great on charizard. Goodluck!

This was really helpful!!! Thank you :) I've been trying to find something a little easier to work with and less expensive to make articulated wings for a cosplay of one of my dnd characters. Never thought about using pvc pipe, I didn't even know you could bend it with heat!!!

@CreativeChaosCostumes

3 жыл бұрын

You're welcome! Happy to hear is was helpful. Good luck on your wings! 😁

Really cool!

@CreativeChaosCostumes

4 жыл бұрын

Thank you!

thank you. nice tutorial

@CreativeChaosCostumes

5 жыл бұрын

Thanks! And you're welcome :D

Wow u made amazing cosplay wings and a beauty dress too u have xD keep up the creativity :D

@CreativeChaosCostumes

2 жыл бұрын

Thank you so much! That is very sweet of you to say! I will keep it up!

Wow they look sooooo cool 🤩 🤩 🤩

@CreativeChaosCostumes

3 жыл бұрын

Thank you!

my cosplay queen you do it again :)

@CreativeChaosCostumes

4 жыл бұрын

Hahaha, Thank you! Happy you like them :D

Omg thank you

@CreativeChaosCostumes

5 жыл бұрын

+Kingsley Martin you're welcome ;)

Thank you!

@CreativeChaosCostumes

3 жыл бұрын

You are very welcome! 😃

Thank you! Ill be going as a ranwing from a book seris called wings of fire for halloween

@CreativeChaosCostumes

4 жыл бұрын

Oh, that sounds awesome!!! Goodluck with your costume!

@auroraprop

4 жыл бұрын

@@CreativeChaosCostumes ill also be doing horns tail and scales!

@CreativeChaosCostumes

4 жыл бұрын

Yeeey! :D

@kierarose3341

4 жыл бұрын

Oof I'm gonna be moon-watcher

@pumpkinette16

3 жыл бұрын

great minds think alike. I guess that's how I found this video, since i'm going as Queen Glory of the RainWings. it's such a good book series isn't it?

Thank you so much. This will really help my 11 yo have a great Halloween

@CreativeChaosCostumes

4 жыл бұрын

Glad I could help!!!

This was really helpful!! I'm just curious how you have the wings sticking out of the costume. Do you have a slit in the back so that you can slide the pvc into the harness through the costume?

@CreativeChaosCostumes

3 жыл бұрын

Glad it was helpfull! I designed my dress with the back low enough to go underneath the wings. The sleeve are seperate on a bolero type top that closes in the back above the wings. But slits would work great to!

Omg awesome

@CreativeChaosCostumes

4 жыл бұрын

Thank you!

I just customized a dragon mask, so adding some cool wings is a fun idea for my dragon stuff

@CreativeChaosCostumes

4 жыл бұрын

Sounds awesome! Wings would totally complete the look. Goodluck :D

@lulururu6681

4 жыл бұрын

Thanks 💖

Where did you find the pvc pipe? These are so cool I'm making them for my fursuit

@CreativeChaosCostumes

4 жыл бұрын

You can get pvc anywhere they sell construction materials. Those thin pvc pipes are usally used to run electrical wires through. Cool, goodluck!

@Muzan-Jackson

4 жыл бұрын

@@CreativeChaosCostumes thank you! I'll try to find them at home Depot or lows

@CreativeChaosCostumes

4 жыл бұрын

You're welcome! They must have it

Could you please tell me what the plastic stuff is so I can make this?

@CreativeChaosCostumes

5 жыл бұрын

You mean the pvc pipes?

@jessika16lw33

5 жыл бұрын

U can get pvc at home Depot

Do I need to use a back harness to keep it on my back or no?

@CreativeChaosCostumes

3 жыл бұрын

You don't have to. You can do what ever works for you. But you will need something to keep them on your back if that's where you want your wings 😜 sliding them into a corset will probably work too

Hello ! I love it !!! I want to try ! But I don’t know what size I can buy 🤔 ( not the diameter but the length 😊

@CreativeChaosCostumes

3 жыл бұрын

Hi! It really depends on how big you want your wings and in what lengths your store sells the pvc. I would measure the length you want them and then go to the store to see how many pipes you need. The minimum length here is 2 meter per pipe I believe?

@carolinelouviot5520

3 жыл бұрын

Creative Chaos Costumes I saw 1 meter too 🤔 Thanks for your response !

@CreativeChaosCostumes

3 жыл бұрын

Ah cool. Those are easier to transport 😜 No problem, and goodluck!

What size of pvc did you use? Diameter wise.

@CreativeChaosCostumes

4 жыл бұрын

I think it was 5/8? And the shoulder pieces 3/4? I just used what I had left... A bit thicker may be sturdier if you use heavyer fabric

What size bolt do you use?

@CreativeChaosCostumes

5 жыл бұрын

The package says M5x50mm but it depends on the size pvc you use. For bigger wings, the shoulder pieces will have to be bigger than mine

Would it be ok to use cardboard tubes instead of pvc pipes

@CreativeChaosCostumes

2 жыл бұрын

I personally don't think those will be strong enough... But it is worth the try! Good luck

As good as this looks, even in North America, nobody'd be stupid enough to attempt flight with the big wings (I hope!)

@Jamila1992

7 ай бұрын

Haha, I never recommended flying with them. But this is the internet. You never know what people with do with the information provided... At least it looks good! 😜

@richallenxbox1976

7 ай бұрын

@@Jamila1992 True

What did you use to heat up the pvc?

@CreativeChaosCostumes

2 жыл бұрын

It's called a heat gun 😁

What are the inches or cm did you use?

@CreativeChaosCostumes

5 жыл бұрын

Sorry, I have no idea... I used what I had laying around.

Oooo! It's amazing🖤 But, It's enderdragon in minecraft? 🖤 Je suis française, C'est magnifique🖤 Tu mérite beaucoup plus d'abonnés🖤

@CreativeChaosCostumes

4 жыл бұрын

Thank you! I just made an own design I liked. Didn't have to look like anything else :D Thank you for your kind comment! Merci ;)

@emile5855

4 жыл бұрын

@@CreativeChaosCostumes Your welcome🖤 It's very "gentil" (Sorry TwT) Héhé derien ;3 🖤

@CreativeChaosCostumes

4 жыл бұрын

;D

@emile5855

4 жыл бұрын

@@CreativeChaosCostumes {\___/} (UwU) />🖤

what did you use to heat the pvc pipes?

@CreativeChaosCostumes

4 жыл бұрын

It's called a heat tool :)

@pumpkinette16

4 жыл бұрын

@@CreativeChaosCostumes k thanks! i found the tutorial a few months ago and i figured i could tweak it a little. dragons and all. :)

@CreativeChaosCostumes

4 жыл бұрын

No problem. Yes, ofcourse! The tutorials are ment as inspiration. Make it your own! Goodluck :D

@pumpkinette16

4 жыл бұрын

@@CreativeChaosCostumes thank you!

I dont know if you will reply, but how did you connect the wire exactly? I've watched multiple times and i cant figure it out 😖 Please explain?

@CreativeChaosCostumes

11 ай бұрын

Hi, not sure if I can explain it clearly but I will give it a try: I took the long/outside wing pvc pipe (the one that hangs down, not the one connect to my back) and in the top part I made a small hole. I put the fishing wire trough the hole and make a few knots. That it. That is how it is attached. When I just pulled it the wing wanted to go outward a bit. That is why I added the eye screw to the middle of my harness on my back. You need to be able to have the wire run from the point of the wing and stay in the middle of your back. Hope this helps

@Noahhhh_luv

11 ай бұрын

@@CreativeChaosCostumes thank you so much, that explains it a bit! I appreciate you still replying to comments, even 2 years later!!

@CreativeChaosCostumes

11 ай бұрын

No problem! Always happy to (try to) help. Good luck!

@Noahhhh_luv

11 ай бұрын

@@CreativeChaosCostumes Much appreciated!! Now i have something to work on for my next costume 😆

Do you have a Etsy shop?

@CreativeChaosCostumes

Жыл бұрын

No, I do not have an Etsy shop unfortunately

Can I have it

@CreativeChaosCostumes

Жыл бұрын

If you can make it, you can have it 😉

How long did this take you?

@CreativeChaosCostumes

4 жыл бұрын

I can't really remember... but it was a couple of days before the con, so not too long ;)

Cheap... If you already have the power tools But this is sill really good

@CreativeChaosCostumes

4 жыл бұрын

Most of my tools are from aliexpress, and not expensive at all! If you don't have the tools you just need the creativity to come up with some solutions :D Pvc can be cut with a hand saw, I have even used a sharp kitchen knife in the past. If you don't have a heat tool try an iron! You don't even need to flatten the pipes, but it makes them harder to hide. So you may need to change your outfit a little. You can hand sew if you don't have a sewing machine etc. My tutorial only shows you how I did it and serves as inspiratie for your own creations. You can make stuff as cheap or expensive as you want. It is al up to you, your creativity and imagination ;) So yeah, cheap! But thank you for the comment.

@rainbowpanda6960

4 жыл бұрын

Creative Chaos Costumes, sorry ‘bout that I didn’t mean to offend you if I did. Though your wings are really good, better than what I could do!

@CreativeChaosCostumes

4 жыл бұрын

Oh no, I am not offended! I just see a lot of people giving up because they don't have expensive materials or tools. But i think it's an opportunity to find a different sollution. I really hope you try them yourself. I think you could supprise yourself with what you are capable of!

I want to do it but I'm too little to do it idk how to do it I wish I had wings :`(

@CreativeChaosCostumes

4 жыл бұрын

Maybe someone can help you make them? Or maybe you can buy some wings some where?

@soldiertricksterlemon6494

4 жыл бұрын

@@CreativeChaosCostumes I'm 8! I dont have money :_

@CreativeChaosCostumes

4 жыл бұрын

Ask some for your birthday! :)

@soldiertricksterlemon6494

4 жыл бұрын

@@CreativeChaosCostumes but my birthday is Turkey day/ thanks giving!:(

@CreativeChaosCostumes

4 жыл бұрын

I'm sorry, I can't make wings appear for you. I don't have magic powers... But before you know it, your birthday will be up and you will be able to ask for wings. You can always ask an adult if they will help you make them. Maybe you will be lucky!

Right now I have to open my credit card but I will let u know and yes tell me what is yours Facebook

@CreativeChaosCostumes

5 жыл бұрын

Creatieve chaos costumes. You can send me a message there. Link to my fb is also in the description of all my video's

@littlewolf7153

5 жыл бұрын

Thanks

Thank you so much omg

@CreativeChaosCostumes

5 жыл бұрын

You are very welcome ;)