Materials: -Magic tape strap -Pvc pipes -Pipe joiner -Plastic pipe clip -Bolts and knots screw

@MaxxavierSantiagoResto

4 жыл бұрын

Can you be a bit more specific?

@wipsywoodsy

4 жыл бұрын

Thanks

@olakopinska

4 жыл бұрын

:D

@Solarcai1293

4 жыл бұрын

heat gun and hot glue gun too

@mayaalvarez205

4 жыл бұрын

@@Solarcai1293 You can just use stove fire too

MATERIALS: Osier branches, waxes WARNING: Don't fly too close to the sun, ask Daedalus for more advice.

@blonk182

4 жыл бұрын

Ridge Gavin Engo H A

@mrorion4794

4 жыл бұрын

Nice an icarus reference

@strikereureka1927

4 жыл бұрын

Icarus: fuck Off. *falls down* SHIiit

@Fireinthehole602

4 жыл бұрын

I WAS BORN IN 2011

@Solarcai1293

4 жыл бұрын

@@Fireinthehole602 young boi

Now make it about 6x bigger have a tail rudder elevators and ailerons use aluminum instead of pvc and high strength dracon fabric then you have yourself a possibly working glider or a death wish

@MrE_

4 жыл бұрын

KZread comments giving me creative ways to kill myself. Nice

@humphrey7079

4 жыл бұрын

Mr.E your welcome

@joshuapenner6749

4 жыл бұрын

Uh u r a really smart person if you build that let me know and I'll watch that video.

@daddy8884

4 жыл бұрын

The latter

@movedoldaccountofwillowthe7143

4 жыл бұрын

Why not have both?

I tried this and it worked great! I used 30 ft of 1/2 inch PVC an 2 yards of fabric per wing. DO NOT USE 1 INCH. I did that my first attempt and it was to heavy to lift. Sadly my clamps are different so when I try to swivel them forward it jabs my sides. Try to get ones like his. Also I recommend a stomach strap as well as a chest strap. It is easier to lift the wing's with your hands instead if arm straps. Hope this is helpful!

@jboyt2431

2 жыл бұрын

Hi... I really don't know what fabric for the wings to use ... would you ask me to help with the type of fabric?

@carloseduardo-el6xd

2 жыл бұрын

Eu não estou acertando os furos depois daquele primeiro que ele faz. Você poderia me ajudar com isso já que fez uma ?

@MOCA4

2 жыл бұрын

I just used cheap craft store fabric. I think I just used a polyester blend. But I think cotton works too.

@ted_van_loon

2 жыл бұрын

@@jboyt2431 polyester is the cheapest often, you can get a very light weight polyester or nylon fabric, where the polyester one is around €0,50 in the eu, so likely half that price if you are in USA. cotton is very heavy, canvas even more so. if you want it for practical use you can look towards nylon or ripstop nylon which is strong enough for actual use, use if you really only focus on practicality armed PE works very well since it can hold a few hundred kilogram of force per cm2 and is also ripstop, so that is strong enough for actual flight(where ripsotp nylon also is technically seen, but you need to be more careful when working with ripstop nylon. you should also add extra support to prevent the wings from going towards your back so you won't have to lift your own weight. I have experienced that for me a wing of 4M2 was enough to fly when there was decent updraft, this was however a powerkite design so it had much more speed and gained more lift from that, for actual flying devices shaped like normal wings you should look to around double that size for some fun gliding, to make it proper for actual flight there are some more things to concern like the controls mostly, but for now you can mostly rely on your weight and a slight v shape. but the wings should be constructed stronger with double joints instead of single sided ones and you likely need something behind it and in front of it, often this is done with a strong rope from the front. if you want to glide at lower speeds you can use the air foil shape in the wings, however the standard airfoil is heavily outdated despite almost every plane or flying machine still using it. for simplicity you can keep it like a normal airfoil but at the tips of the wings they go back to a flat wing as if there was no airfoil, this makes it around 80% more efficient than a traditional wing according to nasa's papers, it mostly does so by converting the force which normally forms turbulence on the tips into lift, this also allows much lower speeds while maintaining lift. the other big gain is that you don't need to add a tail for drag behind it because it stays stable by itself, this also makes it much more stable which are the 2 reasons(efficiency, stability) why it is used in the mars glider for example, however the wing type is much older than that. if you get them folding well while also having such a new version of the airfoil it would be nice if you posted the designs since it isn't something I have really tried to do yet because a airfoil like shape increases material usage, cost and weight a lot, so I didn't really see much reason to put it in back foldable wings. however since in Europe cosplaying is legal, but using things that go into the air, or going into the air yourself is not unless you buy a very expensive licence from the government, it would possibly be nice to have foldable cosplay wings which give you proper stability and more lift at low speed when flying

@MOCA4

Жыл бұрын

@Arts of Akanksha well, you can alter it probably. Make all the pieces a bit smaller or something.

Nice elytra I didn't think you could craft one I just got mine from a end city

@soupmactavish67

4 жыл бұрын

?

@hinamerchant4370

4 жыл бұрын

He is talking about minecraft

@baobinh2513

4 жыл бұрын

And I just got 3 elytras 😂

@Solarcai1293

4 жыл бұрын

lol

@gitaharihidajat7357

4 жыл бұрын

Is it possible to fly with this one?

The pipe he uses looks like solar heater pipe, which isn't easy to find. Home Depot near me only carries schedule 40 PVC, too thick for this. Lowe's had the thinner stuff. I bought three 10 foot lengths in the 1/2 inch diameter, two feet of 3/4 inch, four 3/4 inch pipe clamps (I assume his fancy plastic ones are part of a solar system as well), four 3 inch bolts (for the three pipe joints), eight 2 inch bolts, four 1 1/4 bolts (for the pipe clamps, two 1/4 inch PVC 90 degree angles, to two 1/4 T-connectors. Screenshot his measurements, cut the pipes to his specs, i painted them at this stage, drill and build using your screenshot from his measurements. The 3/4 pipe goes over the vertical 1/2 pipe on the square section with the wings connecting to the pipe clamps attached to the 3/4 pipe, this allows the forward rotation of the wings. The straps, which aren't clearly shown, are connected like backpack straps to the top and bottom horizontal bars in the back square piece. The arm straps are connected to the wings. You'll see which piece as you manipulate the wings and see which one allows the best movement.

@laurynelse9079

2 жыл бұрын

Wanting to make this today, THANK YOU FOR THIS!!!

@laurynelse9079

2 жыл бұрын

Also, you say to use 1/4in elbows and connectors.. is that supposed to be 3/4inch?

@rahicfinn4435

2 жыл бұрын

Sorry, 1/2 inch connectors. Also, as my son wore it we found the nuts kept backing out. I dropped some hot glue on them but one still came off as he was trick or treating. I'm going to try the nuts that have nylon in them, they are locking

@goldenchipsempire

Жыл бұрын

Finaly a usefull comment! Thank you :)

@benlucchese7375

Жыл бұрын

@@rahicfinn4435 I was actually wondering if the nuts would back out

My new Halloween costume

@thegreatandmightyseff7214

4 жыл бұрын

oh thx for the likes

@pranalisarpotdar8203

3 жыл бұрын

You're welcome.

@hannahhh6898

3 жыл бұрын

Omg yasss

@hannahhh6898

3 жыл бұрын

It would take me a long time to make that though @-@

@pranalisarpotdar8203

3 жыл бұрын

@@hannahhh6898 I am currently making it.

Me: *builds it* Also me: *adds jetpack* Also also me: LETS GO BOIIIS

Thank you so much for this tutorial. It makes for a great prototype for a polished product. Aside from converting metric to imperial, it was easy. I also curved the two inner ribs as well. I purchased some red and black scales textured vinyl, cut it in strips, used spray adhesive and gave the “ribs” of the wings a bit more depth and realism, I also made wing dew claws to cap off the ends. I’ll post the final product when I’m completely finished but overall, I’m very pleased with the result.

@benlucchese7375

Жыл бұрын

You have a link to the final product? I'm hoping to make some for my daughter's Halloween costume.

@MyrthevanNoetsele

Жыл бұрын

Do you have a picture of it?

@Dragon-Slay3r

Жыл бұрын

Ain't they curved hands on the wings?

@Dragon-Slay3r

Жыл бұрын

​@@benlucchese7375 thanks not a hand it has additional features like this 🖕

Fiil pipe with sand and cork each end ? ....prevents the tubes from kinking ! - warm pipe & bend When pipe cools down remove corks empty sand out ? ...perfection ! I was shown that while at school in 1976! (15 years old ) - Whole clase was on a plumbing course ? Getting us all ready for leaving school in 77! - I Never actually used that hack myself ? haha - (60 year old next) - Thought I better pass it on now while I can ! - Might not be here much longer ? - Not if I try jumping out of an upstairs window with my bat wings strapped to my back ? - Haha ! This tip might help just bend pipes better If someone - is building these great wings ?

@davidschovel8218

7 ай бұрын

Thank you for this❤

Can we have like an actual how to video with the measurements and steps like

@mimikyuclan2723

3 жыл бұрын

Plz yes

@scottwilliams846

2 жыл бұрын

Ok. I've made something from somewhere before and just made it scaled to myself at the time. Use an arm length from the final shot and your own arm for measurements.

So for the past two days, I've been looking at ways to make movable wings, then I see this video made a day ago, how did he know exactly what I was looking for at the right time

@teresaellis7062

3 жыл бұрын

I know. Right?! I was thinking of umbrella splines for lightness, but this is so much more likely to survive and work.

@Runemane

Жыл бұрын

That's Me today lol

Writing from the hospital. Not functional. Be careful.

@interexp

4 жыл бұрын

dude, what the f is wrong with your avatar

@jarrodderr

4 жыл бұрын

Hahaha. I don’t drink anymore so I do what I can. 😆😆

@mohandas5961

4 жыл бұрын

Hmm

@liamramos3743

4 жыл бұрын

Dudes he don’t want more people to save (Be careful okay)

@UltimateEntity

4 жыл бұрын

The fuck..!?? That was so creepy :v

Imagine go to Halloween party, sit in a bar, try to grab your drink and remove someone's eye XD

@teletranoats7491

2 жыл бұрын

aahahahahahahahahahahahahahahahahahahahahahahah

Can we get more information on this like last steps to make it articulate and how u strapped it on🙏

@s.l.chakmakjianphillips9296

4 жыл бұрын

I'm wondering how that part works too ngl

@jayden2u

4 жыл бұрын

watch the video at half speed

@prettylittleenclave

4 жыл бұрын

They just used hot glue or super glue, pins, and straps.

@abdelqoddossawi9554

4 жыл бұрын

😁

Ａｌｌ　Ｔｈｅ　Ｇｏｏｄ　Ｇｉｒｌｓ 　　　 Ｇｏ　Ｔｏ　Ｈｅｌｌ

@sunshinepay6535

4 жыл бұрын

A w e s o m e

@foxblue1903

4 жыл бұрын

Shame that one was cgi.

@Fireinthehole602

4 жыл бұрын

a w e s o m e

@ruupnix569

4 жыл бұрын

Why?

@azelia5489

4 жыл бұрын

:)

if only I could fly for real😂

@jxjxjdjdjcjj788

3 жыл бұрын

Yeah...I would fly away from my problems

@martinvalent94

3 жыл бұрын

☃️🏔️🐸

@saravananelumalai9178

3 жыл бұрын

You are my god if you make me fly

@segrawaniritongah9774

3 жыл бұрын

Nyasar bang?

@serhatozel9576

3 жыл бұрын

@@jxjxjdjdjcjj788 ıj🙂🤗😋🙂🙄🤗😘🙂😐😐☺🤗💤👸👳‍♂️🤴👨‍✈️👩‍🚒👮‍♂️👮‍♂️👮‍♀️🤴👳‍♂️👸👸👸👸👸👸👸👷‍♂️👱‍♀️🧔👩‍🚒🤴👷‍♀️👩‍🚒👷‍♀️👱‍♂️👨‍🎤👨‍🎤👨‍🎤👨‍🎤🤴🤵👸👸👸👸🏿🧔👸🏿🧔🤴👳‍♂️🍄🥕🎂🏐🎯🎯🎯🎯⛳🎯🎯🎯🎯🎯🎯🎯🏑🎯⛳🎯🏒⛳🏒🏉🏈🏉🎿🏂🏂

Literally no one: ......... Billie Eilish: 3:52

@spontaneouscreativity6858

4 жыл бұрын

😂

@gaelsanchez1225

4 жыл бұрын

Yes

@Z3AG

4 жыл бұрын

I was going to comment on that

@belenserrano9049

4 жыл бұрын

Sureee!!😂😂😂

@ALLBione_

4 жыл бұрын

please tell me the name of the song)

For those looking to make these, they have PVC cutters in the same aisle for like 7 bucks lol NO hacksaws on pvc... keep them edges clean

@edenofhearts

Жыл бұрын

Listen to this guy, saw is much more expensive if you’re just buying it for this project, and takes a ton more arm strength

Is that from "all the good girls go to hell"!?? :v

@nathqn

4 жыл бұрын

THATS WHAT I THOUGHT

@hashtag__7475

4 жыл бұрын

This is the comment I was looking for when I clicked the video

@thesun4003

4 жыл бұрын

Just watched it and then this... Coincidence? I THINK NOT!!!

@giin97

4 жыл бұрын

Pretty fast to design, film, edit, and upload in less than 36 hours. Normally these kinds of videos take several days to make, and are set to "release" automatically a few days to a few weeks after upload.

@yozaraaa

4 жыл бұрын

xD billie bought them

So cool and much more affordable than aluminium i imagine! Thanks for the video!

Wish this “tutorial” didn’t leave me guessing how to do basically everything, so far it’s taken 4 hours and we still don’t understand wtf we need to fix for it to work

I have been looking for diy wings for years and finally found it thank you

Make a tutorial. You did show us how you made it but some of the angles when you mesured left us with a estimate. Please make a tutorial though.

So awesome! I can actually make a dragon costume with working wings! Thank you, thank you for your amazing video!

imagine wearing this while going skydiving and it works THAT WOULD BE COOOOOOOOOOL

@KC._.1116

3 жыл бұрын

id have anxiety of it falling apart mid flight tho xD

@divyateja839

3 жыл бұрын

🎉🎉🎉😎🎉😎🎉🎉😎🎉😎🎉😎🎉😀🎉😭🎉❤️🎉🎉❤️🎉❤️🙏❤️🎉❤️🎉❤️🎉🎉❤️🎉❤️🎉❤️🎉

@prashikjadhav3954

3 жыл бұрын

Yes yes yes!!!! Please do it!!!!

@clappyfiappy4459

3 жыл бұрын

@@KC._.1116 no i mean like having a parachute with u while jumping

You are the man! I just finished a pair for my Red Demon! They work awesome!

Absolutamente genial! No dudo que con mayor superficie de sustentación este chico volará efectivamente!

It's so simple yet so cool. I love it

Never thought it would be that easy... Wait, it is The Q.... There is no hard task for him. 😂😂😂

Better than I thought it would turn out. Great work

Wow the different frames and video editing and presentation was more amazing to me than the project.

Awesome! I'm totally going to make this for Halloween! Supercool , thanks for including the measurements too! Definitely going to try this!😀❤😀❤👍👍👍🤯😃

@carloseduardo-el6xd

2 жыл бұрын

Você usou as asas junto com o que no halloween 🎃?

So cooolll! You look like the valkyries in god of war

oh my goodness, this guy is a GENIUS!!!

Fully functional, lots of effort put into it.

Amazing . First Giant wing video .

I’m here because I want to somehow follow along to this and make a Philza minecraft cosplay-

@stal8139

3 жыл бұрын

YES

@TheBlep

2 жыл бұрын

Same

well after having to diy some things to make this, i finally have it! I used fabric on both sides to hide all the hardware and it looks great! thanks for the video. I would have loved more descriptions and measurements though.

I made some and they are so so cool, fantastic tutorial

Thanks for this vid just finished my wings for only €14 and 1 hour of work absolutely amazing

@WhateverIWantChannel

4 жыл бұрын

What diameters of PVC did you use?

@vincentbressers9202

4 жыл бұрын

@@WhateverIWantChannel 19mm at that size you don't have the same attachments as used in the video so I had to make some custom stuff

@WhateverIWantChannel

4 жыл бұрын

blip blop 88 thank you!!!

More awesome Halloween costume builds please!

@perobandas

5 ай бұрын

but its not flyable :\

Power of PVC pipes 🔥🔥

Looks incredible! Also the movement of the whole construction is awesome. One question I have is: What is stronger, hotglue or sewing?

@arha13

11 ай бұрын

Sewing usually

@autumscott391

6 ай бұрын

Sowing with dental floss is stronger than thread and at the Dallor tree dental floss comes in Black and white

Before I read the description, I was like "Those look like billie's wings" amazing job dude, i'm going to be billie demon for halloween

Parabéns excelente trabalho 😍😍

Guau me quede sorprendido, con tu modelo y mis ideas para que no se rompa ,sea lijero y compacto podría servir hasta para planear por los aires

Wow. This. Is. AWESOME!

Nossa passei horas procurando alguém que mostrasse alguma asa com vários momentos e esse sem dúvidas foi top !!!! Parabénsssssssssssss amei !

@leonelbatistabortolozzo5787

2 жыл бұрын

Ola mano izaque mas esta asa que ele fez avoa mesmo.

News suddenly a new surge of bat people is taking place across the world

@vizeath

4 жыл бұрын

Hahaha..... Suddenly everybody on Earth got wings

@mabdiy2605

4 жыл бұрын

Hehehe😆

@vaylen6321

4 жыл бұрын

beople

@ibroramoni8212

4 жыл бұрын

Ķkķkkkkķķkķmkķkķkķ kk Nnnnnñññnnnn

@vaylen6321

4 жыл бұрын

@@ibroramoni8212 same

Tô passada no ferro com tanta criatividade 😂😻

ngl this is actually amazing

Assuming you'd ever see this, would I have to change the size of the pipes if I wanted the base square to be a bit shorter so you wouldn't see it over my shoulders?

@Dragon-Slay3r

Жыл бұрын

Rapture left shoulder had seagul poop has this got to do with anything?

Thank you so much! I've been dying for a simple tutorial on how to make wings! Now I can make my Lucifer cosplay that I always wanted! Thx so much!

I'm impressed you did a great job on your wings

I want to make this too! For another memory and development in life 👍

*Billie Eilish has joined the chat*

@ryleedelacruz7283

4 жыл бұрын

All good girls go to hell

@alvinnnac

4 жыл бұрын

legitly I'm about to cosplay that mv

Can you please make a materials list please?

Nejlepší ❤️ moc a moc děkuju. Přesně tenhle návod jsem potřebovala...

awe I want to make a Vultan cosplay from Flash Gordon Loved him I always thought his wings where cool this idea helps out

Bruh this is the best I can find on making wings, I love it but I wish there was more information and step by step. Great video though.

@GalaxyofArt

3 жыл бұрын

Currently just finished making them. Still wishing there was more info because my wings are unable to close all the way at the elbow joint, and I don't know how to make it work.

*Lucifer is back*

@spontaneouscreativity6858

4 жыл бұрын

In hell, yes🤗 🙄

@UltimateEntity

4 жыл бұрын

@@spontaneouscreativity6858 he get on the land

@WaxyTick999

4 жыл бұрын

Quinton beck is that you??

Awesome! Thanks for sharing!

That is brilliant!! Thank you! Can the pipes be covered in front??

Billie eilish??

''I believe I can fly...'' For real.

Wow!!! You are amazing!!! Love you ❤️

Now we need a video where you suddenly show these to strangers.

Hello, just curious, where can i get the stuff you use for other things that ou make that uses motors, batteries, switches? I would really appreciate it...

@Creativeplaying

4 жыл бұрын

Yeah I would love to know too

@homiehopper52

4 жыл бұрын

Home depot most likely

@Solarcai1293

4 жыл бұрын

when you try to do that tho just make sure that its no to heavy that it will bend, droop, or feel uncomfortable

0:40 that satisfaction🤤🤤🤤🤤🤩🤩🤩🤩🤩

Simplemente...genial...exelente video!

Imagine how cool this would be with feathers attached to the fabric. 😳😳

Now, you too can learn how to cosplay Billie Eilish. You can also add some feathers to make it more like Billie.

Where do you attach the straps for the wings?

Oh maaan, you so cool. Thank you for this video!!!

your camera work on this was also incredible. lol

5 minutes of silence for this guy after making this glider he realises that he can't fly

You are the best

Ya las hice. Están preciosas y me encantan. Muchas gracias ❤❤❤❤

@Am3gari

4 ай бұрын

Tieness todas las medidas, podrias dar mas detalle porfavor

How heavy exactly would you say the frame is? Im working on doing wings like this for a cosplay of mine! However im being bombarded with the question, “how heavy is it?” And i would really appreciate some help! Thanks! This is super cool and helpful!

Just paint those PVC pipe in black color..it will look awesome!! But you will still not be able to fly😊

@jayden2u

4 жыл бұрын

well done sherlock

Billie : Aw yeah

Really, if you appeared at night in the woods with these wings, people would think they would be a creature from another dimension, all that's missing is the bat mask, I liked the wings 😉

boy oh boy that reminds me of a birdman you make it look so easy I am from India I watch each and every of your video you are such a genius your videos are amazing love them all👌👌✌✌👍👍 maybe u are gonna fly with that wings some day

@jayden2u

4 жыл бұрын

nope not EVER with those wings

*КРУТО!*

What did you use to grip the PVC on the body to the wing 1:50

@mr_abogado

4 жыл бұрын

Pipe joiner and plastic pipe clip

@FahadTH

4 жыл бұрын

Jjmnnhykj¡B👁️👁️👁️👁️👍🐼👍👍👍👍👍👍👍👍👍👍👍🐩🐩🐩🐩🐩🐩🐩🐩🐩🐩🐩🐕🐕🐕 Be

My Goodness, I haven't seen this guy in so ooooo long.

Amazing! Thanks for the Video! 🙏👍👌💯

standing in the mountains and jump. Miracles will come to you🤔 You can flying 😱 to a hospital 😂😂😂😂😂😂😂😂😂😂😂

0:27 under the desk 😂

@1alopezpr

4 жыл бұрын

Good eye 😁

Se a galera do carnaval do Rio souber, vai fazer um monte. Ficou muito bom.

This is amazing !

Belly Eyelash wants her bbq wings bacc

@xiao6638

4 жыл бұрын

LightDarkEquivalent 714 this made me laugh. Thank you for making my day!😂😂

The Batman!

Very Cool Bat Wings.

Very criative ideia, congratulations!

This is so amazing!!! What's that part/joint called which shown in this vdo from 1:50-2:00?

@mr_abogado

4 жыл бұрын

Pipe joiner and plastic pipe clip

@colbyking6535

3 жыл бұрын

Mishael Abogado do you know where you could purchase it? I can’t find it anywhere!

0:12 personaly i will be very bored cuting the wings 😂😂

Hello, I'm from Thailand, I like your video.

@jayden2u

4 жыл бұрын

Hi I'm from UK Yours is the best comment to this video !

Ficou muito bom mesmo