I'm here to say I am _not_ cosplaying as Hawks, but I am going to make some big ass feathery angel wings to assert my dominance and superiority

@angelslaugh6876

2 жыл бұрын

I am gonna be cosplaying hawks but I am 100% wearing the wings to show dominance over everyone I meet 😅

@forgettableallosaurus7916

2 жыл бұрын

I'm going to attempt to make mothman wings (I can't find any to make my arms the wings) I might be better off *winging* it

@_ash-s-.g_6003

2 жыл бұрын

Same 😭

@CaraOMara

2 жыл бұрын

@@forgettableallosaurus7916 ah, the pun-tential

@forgettableallosaurus7916

Жыл бұрын

@Saidon Ra Thank you! :)

me bored in quarantine and interested in cosplay watching this: 👀👀

@rindibout

4 жыл бұрын

sam Same I literally made a Playlist called quarantine cosplay projects lol

@silaswillen7302

4 жыл бұрын

how did u know

@roxassora2706

3 жыл бұрын

@@rindibout Same I'm just filling it in with mostly parts of characters. I'm not gonna be anyone from mha. I'm planning to cosplay as Pit from Super Smash Bros

@idiotlol3871

3 жыл бұрын

I am looking at ideas for my dragonet cosplay for Halloween.

@Scarecrow_IDK

3 жыл бұрын

Same

I love how so many people are here for either Hawks or Philza and a few for Grian

@GaiaTheLeafwing

Ай бұрын

I'm here for grian! more specifically cuteguy lmao

@ParanoidAsHell

29 күн бұрын

​@@GaiaTheLeafwingI'm here for YHS Grian lol!!

Thx I needed this for my cosplay for my hero academia

@aliceinscaryland

4 жыл бұрын

Hawks? xD

@-amvsasshortaslevi-854

4 жыл бұрын

Same ;)

@aarmaufan1619

4 жыл бұрын

Same! I need to make them for hawks

@sebby638

4 жыл бұрын

Mood XP

@prototype572

4 жыл бұрын

LOL- ALL OF US HAVING THE SAME IDEA--

Hello all! I see some of y’all would like to know how to scale the wings up considering they’re quite small, so I’ll let y’all know how I did it! it’s originally 20 inches for the larger planks, so I made it 30, this means -the 8 inch space becomes 12 -the 11 inch planks become 18 inch -you can leave the .5 inch gaps from the end and the 3 inch gaps for the joints, they aren’t affected These measurements still hold up to work, and provide a much larger wingspan than the one the original design provides. If anyone has further questions, lmk!

@Rita-jf2sw

5 жыл бұрын

Do you need to make two sets of these for both arms?

@butterpiggie9624

5 жыл бұрын

Rita Ferrell no, the design is made for two wings on both side, while the inner 'diamond' shaped area is for your back. You'd only have to make one set for both wings :)

@Rita-jf2sw

5 жыл бұрын

@@butterpiggie9624 ok thank you so much

@halfthefiber

5 жыл бұрын

Not related to scaling it up, but how did you wear it? Was it through a backpack like the video or through a harness? If it's the latter, how did you do it?

@pieunicorn9595

4 жыл бұрын

how thick did you cut your wood?

I looked up Hawks Wings and found this- and as I’m scrolling through the comments I’m realizing that half of these comments are about Hawks 😂

@kitagawhat

3 жыл бұрын

yeah I wanna do this for maximum ride bird wings-

@annarectionn

3 жыл бұрын

Yeah

@rosewolflps4586

3 жыл бұрын

yep

@merdragon1234

Жыл бұрын

I just wanna be a harpie for Halloween ;w; tho Hawks is cool to -w-

@_sanemi_shinazugawa_

Жыл бұрын

Yep 😂

Me: "hey dad can i borrow wood, nuts, and bolts?" My dad: "why?" Me:... Me: "its for a thing..." (I wanna cosplay hawks

@cassbenitez3885

3 жыл бұрын

I’m gonna cosplay hawks too! I kinda already know how to make the wings but I was thinking how much cooler it would be if they moved so that’s why I’m here 😂

@hannahhh6898

3 жыл бұрын

@@cassbenitez3885 nice!

@dude3850

3 жыл бұрын

samee😫

@VampireDraculara

3 жыл бұрын

Cool

@lilianandnia9713

3 жыл бұрын

ME TOO

Be honest, how many of us watching this are wanting to cosplay Hawks? Edit: I'm returning because of Philza Minecraft.

@laylaornelas2529

3 жыл бұрын

Stop outing me

@vberry8366

3 жыл бұрын

Lol, I'm getting the cosplay for my birthday

@definitelynotlink5420

3 жыл бұрын

Are you watching me?

@creepycr4wliez

3 жыл бұрын

....yeah

@x-genyt3856

3 жыл бұрын

OMG IM GETTING CALLED OUT TvT

IS IT ME OR EVERYONE IN QUARANTINE IS GONNA COSPLAY AS HAWKS?!!!

@coolcool9922

3 жыл бұрын

When you can't see pretty boys you become the pretty boy

@hinatashoyo2545

3 жыл бұрын

cool Cool LMAOOOO FACTS

@Ouijathefox

3 жыл бұрын

I feel so attacked by this comment section but facts ..lol

@katsu_vb5087

3 жыл бұрын

@@coolcool9922 you didn't have to expose me like that yk

@x-genyt3856

3 жыл бұрын

See the hawk, feel the hawk, be the hawk :>

me: mom you can make things right my mom: yeah me: *spams this video to her* h e l p p l e a s e

I needed this for my cosplay for Hawks from BNHA, thanks!

now i can cosplay philza and grian the more knowledge i get from making moveable wings like this !! thank you so much, genuinely

@traumatizedllama5370

2 жыл бұрын

yoo finally another person who wants to make a philza cosplay and not a hawks cosplay

@GothicCorvid

2 жыл бұрын

@@traumatizedllama5370 hell yeah, philza minecraft supremacy. same for grian and some of my MCYT aus :) gl on your cosplay man!

@traumatizedllama5370

2 жыл бұрын

@@GothicCorvid good luck on your cosplay too!

@GothicCorvid

2 жыл бұрын

@@traumatizedllama5370 thank you !!

@RindouHaitani_

Жыл бұрын

I'm here to learn for a Grian cosplay lol

I'd suggest using a washer in between each piece of wood where they connect. Lock washers would be excellent for staying in place and not loosening up as well.

Me: dad! You work in construction correct? Dad: yes Me: alright I need nuts, wood, and bolts Dad: why? Me: shush! No questions! I just need them!

@Anon12762

3 жыл бұрын

This is exactly how the conversation went for me 😂

@hannahhh6898

3 жыл бұрын

My dad likes to work with wood and I asked him to help me but I think he forgot XD

@aglitchxd850

3 жыл бұрын

I did ths with my dad XD

@kantablet9183

Жыл бұрын

I’m hoping I can get what I need for 20 dollars at my local hardware store I don’t want my dad to ask me questions-

Everyone wants to cosplay Hawks and I’m trying to make Tamaki’s wings 😂

@jellycosplays3377

3 жыл бұрын

Imagine how cool it would be to make a hang glider and just turn it into cosplay wings and just using hawks quirk irl I wanna figure out how to do that

@klej1621

3 жыл бұрын

Man i just want wings

@T3mperanc3

2 жыл бұрын

Bro I just want them for tokoyami but with like wings bc I think it'd be cool :'3

@RipWanWinkle-vg8ld

2 жыл бұрын

And im trying to make wings for my armor

@denisepenner8611

2 жыл бұрын

I'm just trying to do it for a Philza cosplay-

And boom I have a Halloween costume, thanks for making this! It’s the only useful video I could find on the subject. But I do have one question how would you add feathers or attach it to a harness?

@desringdifoesa9176

5 жыл бұрын

Just wait

@romieschannel9161

5 жыл бұрын

Doggo King kool

@kvs0085

5 жыл бұрын

If u really wanna be the best on halloween try building mechanical wings

@pollyanna0014

4 жыл бұрын

I know it's been a while, but I guess you could stick fabric to it and glue or sew the feathers on

@ameliazen3597

4 жыл бұрын

Doggo King Again I know it’s late but if you’re still interested, thecrookedfeather creator posts youtube videos you can take reference from, but her videos are a bit vague.

other people wanted to cosplay hawks: me wanting to cosplay DreamXD: 😌

@Aki-mj3mm

3 жыл бұрын

NO CAUSE THATS ME ASWELL. DREAMXD WITH WINGS IS SUCH A COOL CONCEPT SHIUHS

@jessi_da_tucan8187

3 жыл бұрын

YOOOOOOOO POG

@GothicCorvid

2 жыл бұрын

YOO ABSOLUTELY POG. FOR ME ITS PHILZA AND GRIAN :D

@Ghostinthesheets

2 жыл бұрын

YOOOO! IM DOING PHILZA AND QUACKITY!

@GothicCorvid

2 жыл бұрын

@@Ghostinthesheets QUACKITY POGG?? i already said but im doin phil and grian :D

The amount of Hawks comments-

@S3lf1sh_Mach1n3

3 жыл бұрын

Lol

How do u put fabric on. I'm making wings for my hawks cosplay from my hero academia

@xxstrawberry_bear_bonxx1015

3 жыл бұрын

honestly you should find fabric that's red like his wing and feathers (no hot glue needed hopefully) get a piece 2x bigger than the wings don't put the fabric on before put the fabric on the front and back of the wings and then sew it together if you want them to be chunky add cotton inside or just leave the cotton out and after you sew the structure of the wing tight around the wing with the fabric and the cut off the access (i'm so sorry but i don't know how you would be able to but the feathers on me neither but good luck i hope you the best!

Needed this for my Crowley cosplay! Thanks yall uwu

@blackunicorn6633

3 жыл бұрын

Me toooo I'm here for your same exact reason!! Hope this works XDXDXD

@foreveryoung2316

8 ай бұрын

Me toooo!!!! 😅😆

@HelloTrandler

Ай бұрын

I’m also cosplaying Crowley!

Please add some sketch and meassurement. And for further development, you might want to use triple layer of thin wood for each stick. That way you can insert one another to get better center alignment, instead of put it on one another. Just an suggestion.

everybody wants to cosplay hawks, and here’s me just wanting wings for no reason

@sunstonethelovabledork.1952

3 жыл бұрын

Relatable

@cupcakxiia

Жыл бұрын

Literally same

@Blizzardshard

Ай бұрын

Same XD

My only problem with this is, mine would be covered with feathers and would be pretty large, how would I be able to move them is there’s not a single piece of wood to grab?

@randomlife9945

4 жыл бұрын

Put a string on the outside pieces so you grab the string and lift your arms up and the will open

@rileyarnold5058

3 жыл бұрын

U can use a certain type of frabric and glue or saw your feathers on and it would keep the movement.

@aysiasimon4555

3 жыл бұрын

Im sure you can use wood glue and overlap the feathers (I know I am *very* late to the question but this is for the people who need another answer lol

@Painting_poltergeist

3 жыл бұрын

Can you help me with the size of the wood. She said 30 in but the place I’m shopping you have to put two numbers (ex. 30in x 12in)

Great job guys! Simple, yet very descriptive. I watched countless hours of videos, and decided to use your design as my inspiration. I'm using aluminum fence spindles as my frame, fabric and real feathers , and a linear actuator to open. I'm making 12 sets of wings for a high school show choir group. Each will have a 7 1/2 foot span. I even made my own KZread video for those interested. Thank you, thank you, thank you.

@xx-riffraff-xx

2 жыл бұрын

your youtube video isn’t up! i’m very interested and i’d like to see how you do it for inspiration because i am very very stuck.

@Mzvandal

2 жыл бұрын

where is the video?

@shadowbonnie6566

Жыл бұрын

Where vid?

I need this for my old hallows eve costume. I’m gonna be god Castiel from spn.

@pewtheartist9046

5 жыл бұрын

Dean winchester is my favorite. FINALLY another spn fan!!!!!😄😄😄😄

@muffledcastiel2668

4 жыл бұрын

that’s so amazing oh my lord 🥺😂

@damespena6785

3 жыл бұрын

Thats what I'm going to do

@izuwuu8865

3 жыл бұрын

Me too, me too.

@loudestcloud

2 жыл бұрын

same! But idk if I want the feathers to be Black, white or rainbow 🥲 I'm thinking iridescent could work but idk

Y'all out here making hawks cosplays but I'm here because I need to make a Husker from Hazbin hotel cosplay :3

@ashton9172

3 жыл бұрын

dont forget about the cheep booz

@failuretosociety1427

3 жыл бұрын

I'm working on a Alastor cosplay rn what a coincidence

@ariaready1892

3 жыл бұрын

Genius

@ashhhyyyy

3 жыл бұрын

i’m here just because i want wings

@Ghostinthesheets

2 жыл бұрын

im here for philza minecraft

I’m thinking about going as Maximum Ride and I was looking on how to make wings and I found this. I’m not sure if my mom will let me do it but she might. I’m wondering how to make it look good though with like the feathers and everything. Like how do you dress up the main structure

@hannahmaw6817

4 жыл бұрын

Same I’m going as Nuge

@kussogaki1092

4 жыл бұрын

Same

@wolfghost-sy5ds

4 жыл бұрын

I love it you should

@missimperfectlyfine7

3 жыл бұрын

omg i wanna cos maximum ride too!

@foxx_kit

2 жыл бұрын

Yesss Maximum ride is amazing

This was so helpful! I love this idea and how simple you made it seem to make it, and I'll definitely be considering using your video to make part of the halloween costume I (hopefully) will be able to pull off :)

Thank you so much! Needed this for an aziraphale cosplay

@queenofmemes2859

8 ай бұрын

AYEEE noice I’m doing a Crowley cosplay. Lemme know how they turn out!

@queenofmemes2859

8 ай бұрын

How did ur wings turn out?

@keiiii__

8 сағат бұрын

ME TOOOOOO

me who wants to cosplay hawks just like 80% of the comments; 👁👄👁

😍When you are looking for Halloween costumes for your daughter and PARTS AND CRAFTS in Somerville has the best tutorial!!!! Yay!

Making these for a Halloween costume / original character cosplay, very excited!

My followers chose hawks as my next cosplay n this video helps so much but I’m still dreading it

even though this was 5 years ago, this has helped me out so much!!! thank you for making this video.

Perfect! Thanks for showing me!

Looked into all other designs of KZread and finally here, the best thing about your design is that its simple and sturdy, cause noone wants a wing to break in the middle of a show.

Thanks for the tutorial! I'm hoping to go for a Dark Fey (From Maleficent) So hopefully it will turn out good :>

Y’all are cosplaying hawks while I’m trying to make an elytra

How to assemble the hinge with the bolts and nuts helped me make my fairy wings that mover from a closed/down position to a open/up position!

thank you for making a very coherent wing tutorial for a newb like me, but i would have loved to see them feathered

I’m not here to cosplay hawks, I’m here to cosplay Ph1lza Minecraft 😎✨

@benevolentloki3206

3 жыл бұрын

Same 👌

@blackholejamie8570

3 жыл бұрын

Me too

@hairbrushfactory

3 жыл бұрын

I’m tryna do a DreamXD cosplay and I was like “oh yeah wings would be cool” so here I am.

@jessi_da_tucan8187

3 жыл бұрын

YOOOOOOOOOOOOOOOOOOOO

Perfect this is just what I needed for my cosplay I was thinking to cosplay female version of hawks ;)

Unlike some people I’m not cosplaying hawks or Philza, but this will definitely come in handy for my ren faire outfit for next year!

this is the best tutorial, I tell you. THANK YOU SO MUCH.

I love the way she explains it, I want u to add some feathers to it and that's make it as a real project

Hey , just wondering . What are the measurements for adult wings and also, can the wings fold completely down ?

If you don't want to worry about the bolts and nuts coming loose from all the movement, instead of using the standard washer, use a compression washer...you know, the ones that are a little thicker and they are split on one side and bent a little so that when you tighten the nut down, it causes compression and keeps the bolt night tight against the thread, and it won't come loose! Just don't tighten it all the way down or you won't be able to "spread your wings" (you're welcome) :P

Will be using this for my Grian cosplay! Thx for the tutorial! (:

Hello, I would appreciate knowing how to make the design of the wings and add them to the wood, I am not sure how to put the feathers so that when moving the wings it looks good and how to make one move the wings at will, thanks

Thanks I’m making this for a dragon costume I really hope it works

I am making harpy eda so this is super helpful!

Best description ever!!!

Awesome video! Is there some way I could make an apparatus to keep the wings open or closed whenever I want?

@serena3170

2 жыл бұрын

I think string that you can pull is your best option for being able to move them without having to touch the actual wood itself.

As an Endeavor Cosplayer I wanna make the fire wings !!!

Brilliant!! I love this!!

I need this to make wings for a Philza cosplay

Would love to see how you attach feathers to these wings and what materials you suggest using. Thank you!

@stellakoitzsch

4 жыл бұрын

Hot glue

@serena3170

2 жыл бұрын

Put fabric on both sides of each wing, sew together, and use hot glue for putting the feathers on fabric or sew feathers on.

@venom.strike6999

Жыл бұрын

@@serena3170 hi! I was hoping someone would help with this! Thank you! I just have one more question: what mind of fabric should i use, and should it be loosely sewn on for movement?

@serena3170

Жыл бұрын

@@venom.strike6999 Hi! I'm so happy to help, personally I just used an old white sheet because mine were angel themed, really anything is ok, I do suggest something lighter though especially if you attach the feathers how I did in the end. A lot of the process for me was pinning and repinning to see where I needed to sew so that the wings would move. For most of the wings there was only a centimeter or so of space between the wood and the stitching. For the feathers, (this is a lot of work but I loved how it turned out for my purposes) you can get fake feathers and use a needle with thread on it to go straight through the shaft, then going down into the fabric and back up again to repeat the process, (almost as if you were sewing a bead into fabric) making for a fairly clean and unnoticeable attachment.

@serena3170

Жыл бұрын

@@venom.strike6999 I hope that helped! I know its long but I just wanted to explain it thoroughly enough that it was clear.

You mentioned that these where sized for a kid. To make them adult size would I simply lengthen the pieces while keeping the hole patterns the same ?? That all I need to know the rest was great and I love them thanks

@galaquen

5 жыл бұрын

I just scaled them to 150% and they had the perfect size for an adult.

@lunanightgale

9 ай бұрын

@@galaquenand how would one do tjat

Thank you this will be so helpful for my wings for Albedo from overlord!!

Omg finally someone that made this easy to do

hawks cosplayers in the comments section be like 👁️👄👁️

I'm gonna use this for my hawks cosplay (he s from bnha)

@sixela3645

3 жыл бұрын

Same! I really want to cosplay him, and I'm also the same height as him! :D

I literally went through dozens of video for an efficient pair of wings,🥵 already bought the materials today, now I just pray 🙏 and hope your design works as shown cause I got a film to shoot this Saturday with it. 🙄

@samaeldrigel5811

Жыл бұрын

Thank you so much sister, its 100% working 🥰😊👍, just took a little longer than usual to scale it up. ❤

Everyone cosplaying as hawks but then there is me who wants the wings for Scott the ruler of Rivendell.

I looked this up because I’m doing a Hawks inspired cosplay but a female version 😂

How do u add the feather parts

@miaherrera3950

3 жыл бұрын

Cameron Longknife add a piece of fabric and glue the feathers starting from bottom to top :)

Thank you for adding the measurements almost no one does

I needed this for so many cosplays XD

I’d like to know how thick the wood is and how what the demensions are

@farahroeland8671

4 жыл бұрын

I would also like to know how thick the wood is in the dimensions because I'm currently trying to make these wings but I'm not sure what wood I should use.

*frantically trying to make philza wings*

@cats_with_tophats6800

2 жыл бұрын

Late, but saaaame

Finally I'm finally able to cosplay as my OC bunzzy she has black and white hair she absolutely loves bunnies and she also has black wings it's amazing thank you so much for this very easy steps I'm going to ask my dad if he can help me but thank you so much I love this channel:) ❤️❤️👌👌👍👍😊😊

Thank you I needed this so my kid could do her big project

Tank's for you tech me...I always lernd about that..to make wings (tutorial )..terima kasih from me In Indonesia..Tuhan Yesus kristus memberkatimu...amin..!

I going to to be a fox with wings in Halloween

@nolanbennett346

5 жыл бұрын

roxy glitter fox you described my oc with one sentence

You can use nylon lock nuts in place of the hot glue.

me, who takes Halloween like cosplaying and wants to make my oc: thank you for this information, you have saved me copious amount of money

Out of curiosity, what are you guys making these wings for?i want to see how many people are also making Hawks 😂 Update 8 months later: I still haven't made them 💀 💀 💀

you need to be more specific with the measurements

@3life320

3 жыл бұрын

Also maybe put it in cm as well

I needed this for my Hawks cosplay... thanks :)

my only question is how do you rig them to move? Like with a string? where and how do you tie it so you dont have to use your hands to lift the wings each time

lmao same here guys

I want to make the wings of Spider-Man's villain

Thank god! I might actually be able to do my demon dabi cosplay with wings now :D thank you so much!!

Will you do a video on how to decorate the frame?

i need this for my Grian cosplay sooo bad

@Fiabear22

3 ай бұрын

Same lol I’m using this for help making my wings 😂

I want to make a set of dragon wings so this is an amazing start. But I'll have to figure out how to make the bone extensions in my wings.

This is going to make my Hawks cosplay so much better!!!!

This is amazing!! Thank you so so so so so muchhhhhh

You can use Locktight for the bolts and nuts

tysm for this now just a few amazon purchases and boom hawks cosplay! ^^

It was super easy and cheap! Ty!! Does anyone have any ideas on adding feathers?

Great except I want to have separate arms for this. Is there a way to do this?

I wanna cosplay a angel charter that I’ve made when I was 6 so this helps but I kinda wanna make electronic wings but this helps until I get the stuff for the electrical wings!

Well done.) Thank you for that.

I’m gonna be going as Grian from hermit craft for Halloween, I just need to make the wings and buy the wig so yeah!!

Needed this form my aziraphale cosplay!

@blackunicorn6633

3 жыл бұрын

Good. If you ever need a Crowley, just let me know. I'm gonna try this asap XD

Messed up with the measurement conversions and scaling up and now I have a 3 metre wingspan (9.8 ft.) 10/10

Omg tysm I can’t wait to cosplay philza for halloween

Everyone: I'm using this for a hawks cosplay! Me who just wants to make a Philza Minecraft cosplay: I feel out of place here

Thank u this will help me out a lot