450hp big turbo volvo wagon first TEST RIP
Автокөліктер мен көлік құралдары
In this video we take the panel wagon for its first test drive with its new engine setup
get your hoodies, stickers and beanies at driftsnlifts.com/
POST HASTE PERFORMANCE: www.post-haste.ca/
TOTAL TURBO SERVICES: totalturbo.ca/
POWER DRIVEN DIESEL WEBSITE powerdrivendiesel.com/
BD DIESEL WEBSITE USA: us.bddiesel.com/ CANADA: ca.bddiesel.comhelp us build better volvo drift cars and donate to our patreon : / driftsnlifts
Пікірлер: 127
Super stoked for you bro, that car is a monster. I still remember back when you had to be careful with goldie not to brake the trans every time you drove the car. Now you can finally rip without worrying.
@TooFlyNico
2 жыл бұрын
Exactly what I was thinkin bro. Finally a transmission than can handle the abuse he throws at it 🤣 m47’s are so weak compared to some like a ZF or getrag.
Getting yelled at is a good metric for rippage I must say
@driftsnlifts
2 жыл бұрын
U like that situation defuse?
@abnormalethnogenesis9766
2 жыл бұрын
@@driftsnlifts looked like you stopped since he was filming you
@driftsnlifts
2 жыл бұрын
@@abnormalethnogenesis9766 i stopped to talk to him and defuse his distaste towards my gravy production. All it takes is an apology and to show them youre just another human trying to have a bit of fun.
@ryanreish8160
2 жыл бұрын
I don’t understand how someone can witness such thick gravy and not be like “hell yea that’s some thick gravy”
You're getting close to the perfect formula (setup) that's awesome
I'm watching you shift and swing it and I'm so excited. Awesome stuff!
Looking good so far.
Looks like it shreds! The trans looks like it shifts so smooth too! So sick!!
I'm so glad to see this running again I love this wagon . Dont break it!
I remember the a tractor and the 940! Shit was cool. You have come a long ass way man! Keep it up man!
I've heard that whining sound before (BMW, 500nM Diesel) and it's always in conjunction with loss of gravy (which sucks when I'm sideways in 4th), most likely clutch slip! I know a wheelchair guy too, and it has never stopped him from accomplishing his car related dreams. He had a 450hp Ford YB Turbo in a Lotus 7'ish car, certifiably crazy in all the good ways. Fist bump to all wheelchair users out there! And that kid reacted like a champ, odds are he might have been in one or two tuned cars before!
@driftsnlifts
2 жыл бұрын
I was wondering what that was. You think this trans could be damaged in some way? Bearings worn or something ? My trans tunnel doesent have a boot on it so its gonna be a bit loud down there but its definately whining.
Chair slayer but better 😁❤️ I love it. Great to see the update. The video hit my home page, so you know it’s hitting the algorithm nicely. 👌
She's a spicy spicy waggo now bro it looks like it slides effortlessly Soo good that bit of extra torque and HP made a big difference can't wait to see you smashing the track, now you don't have to worry about destroying gears 😎👌 fkn i love the jaklie Chan speedie fan noises it makes😄❤️
Best Intro on KZread!
Pumped you finally have a built motor to rip around!
Super happy to see you back on that super cool setup! Time for some door hunting bro
Holy shit this car absolutely rips now 🤘 I am moist in anticipation of 500 gravypower once the new studs are in!
Bro gotta take this back to the mountain in Mexico that video has some🔥clips and that long sweeping freeway exit you hit over the border on the way to the mountain❤️😎
It RIPS!! 😍
looks super solid!!
Zf5spd is the best manual I've ever driven, grape selection u got in this unit.
BEEN WAITIN FOR THIS ONE !
@TooFlyNico
2 жыл бұрын
Man this thing sounds beautiful 🤩
What a thrill, for a kid, and the little guy.
this is why i opted for a 6 speed 320d tranny, 6th gear is same as the M47's 5th gear so i still got a crusing gear, but for a drift settup the 5speed is a killer for sure, the setup is sick, i love it
I think that you get a lot och fluid/oil in your catch can when you have a bung in the valve cover. swedes like to run the original breather box to a catch and a breather from where the block distributor goes to the catch can. When doing that you ventilate the crankcase and the gases dont have to find its way to the head to get out. i just drilled out a freeze plug that fits where the distrubutor sits and put a bulkhead an10 there with "o-ring washers" (welded the nut on that backside. then hammerd the assebly in.
It’s Volvo Jesus. 🤘🏼 he brings life to these cars
I have an 04 V70…. This gives me ideas… thanks, guys!
Hope it survive the drift season
Yeeee cool video. Love this wagon. And ride in to the Mexico please
what a beast!!!!! love it
Just got my sweater and sticker pack in the mail! The Rock Auto box to keep the stickers flat made me laugh, I just got rid of one!! Thanks dude, and don't stop doing what you're doing!!!
Hell yeah Cedric.
@BradLancaster86
2 жыл бұрын
can we find Ceddy a Nissan Gloria, I've always wanted to get my best friend named Cedric to drive a Gloria.
По видео чувствуется, что машина очень непринужденно едет, кайф
That’s awesome bro
"I'VE SEEN YOU HERE BEFORE" "nope, not me." gold
Oh boy that thing is a savage!
Coś pięknego
@Itsme-sr8rp
2 жыл бұрын
Klasa
Damn that thing is Insane .Im sure that trucker didn't believe his own eyes and was too shocked to even think of calling police
BOLBO GRABY
beast hehe keep up the good work
Beast asf
Thats insane
Awesome!
The slave cylinder shaft should have a play of at least 1-2mm. You can try just putting washers behind the slave cylinder where it mounts.
i have same volvo in beamng.drive hella tunned to a 700hp-+ and drifting and gaping cars🤘🔥
Super pumped to see you in a car that will last. How much more power before you need to upgrade tire specs on the rear?
Yeeeee budyyy good stuff
she moves
Hell yea
4:52 That is insane how easily it shreds that spot my e46 barely can get that entry (although its definitely the driver not the car lol)
volvo gravy hot and ready as perusal😋
Your big problem with clutch is the volvo stock flywheel thats the whole problem it wear out and go deeper. so the pressure is less. and the surface is super super glace. if you have stage 6 clutch it will keep slipping if you don't resurface the flywheel and make it less deep where the pressure plate bolt on. use 20-50 or 10-60 diesel oil. fill it with extra one bottle.
@driftsnlifts
2 жыл бұрын
I dont think so because i did adjust the rod and i havent been able to make it slip again
I'm just getting into tuning and I love volvo's. The redblocks are pretty indestructible but what do you think such high level mods does to the lifespan of the engine? Assuming of course it is still well maintained. Is there also a place where I can see the specs of this build? Cheers!
3.90s try that 3.73 is a perfect highway gear fuel mileage and cruiser with power makes fun torque but a 3.90 with the right amount of power will make the vw a whole new animal
@josephthrasher1313
2 жыл бұрын
My bad not 3.90 I meant a 3.30 to 3.50
@dsimila1
2 жыл бұрын
@@josephthrasher1313 Volvo stock transmission is 1:1 in fourth gear and the BMW is 1:1 in fifth gear.
Let’s goooooo
DUDE IT RIPS LIKE MINE! AWESOME!! Too much throw-out bearing tension on the pressure plate hopefully! Nice sends, Love how you calmed dude down from calling the boot knockers. What speed in mph do you go into fourth? I go in at 105 mph. Anyway, really cool man, I'm so excited for you, still the syclone turbo? The oil spray is because the camshaft is actually slinging oil into the hose from looking at the location of the bung on the valve cover. I would try to put the bung in a more "oil still" area. Ls swaps have this problem too because the factory crankcase evap location sucks on drivers side valve cover. I hope that helps you. I use the factory setup and it's good for what I need, with the exception being, the vacuum point is at the air screen of the turbo, in the horn. HEAd studs from aRP I think summit racing sells them.
@driftsnlifts
2 жыл бұрын
So 3rd gear tops out at 80mph apparently with this setup so its geared much shorter than yours. I am gonna look for a 3.31 rear diff to put in it and give it a bit longer legs. Itll probably be faster with more gearing and take advantage of the sweet torque curve. The bung on the valve cover i positioned it right above the cam cap so it wouldnt be in the direct line of oil spray from the lobe but im sure some is still getting in there. Im not to worried about it as the oil drains right back down to the pan atleast. Got some arps on order from yoshifab so we will see how long those take cause i know hes having supply issues.
@TurboWorld
2 жыл бұрын
@@driftsnlifts Nice I roll with 3.73, I had 4.11 iirc. I think its a ford 3.73 now. Taller gear will help load the turbo harder too. Sometimes even spooling quicker. Good thinking on cam cap, however those sick acceleration g's you are pulling and swinging, are sloshing and Slinging all the oil everywhere, my guess. Everyone is having "issues" of some sort or another these days it seems, in reference to stocking and shipping. Like George Thorogood said "everyone is funny, I think you're funny too" But that was only after one bourbon one scotch and one beer! Love the show man, cant wait to see what you do next! Volvo Hulk Smash! SUBSCRIBE LIKE BELL! :)
Yo Drifts, does Dennis sell redblock adapted ZF boxes ?
Those ZF transmissions can spit out a lot of oil through the breather tube on top. I routed a hose to a little catch can up by the engine so as soon as you let go of the throttle it just drains back down. Mabye you won't have that problem but thought I would just give a heads up, I know others who has had the same issue too so.
@driftsnlifts
2 жыл бұрын
Apparently the trans are super sensitive to being overfilled even slightly. I was spitting oil of the breather cause i filled the trans when it was out of the car and added 0.3 litre too much. Drained it to the fill plug level and it seems to have fixed it
@smurfvolvo
2 жыл бұрын
@@driftsnlifts good! Mine didn't stop leaking even below the fill plug level so I had to do something. They are great little transmissions though.
I see an 8.8 rear end swap in your future.
The m46’s were great on turbo and take out the 4th gear overdrive lock out ... out
What gauges in that cluster even work anymore lol, might be cool to integrate that tach into the stock cluster.
Hell ya
Pretty sick , is it’s on standalone? Or LH still ?
is that Dan Thomas on the right @ 2:15 i see :) i went to school with him in the UK hes always been a big american car guy owning Corvettes
@driftsnlifts
2 жыл бұрын
It sure is. Dan is the owner operator of post haste performance and has helped me a ton in building the panel wagon.
@posthasteperformance
2 жыл бұрын
Haha, who is this?? Yes its me!
@oculusdrifter9261
2 жыл бұрын
@@posthasteperformance Marc Humphreys it is, went to a few car shows with you back in the day when you had the red corvette C4/5 and you used to work in Autobitz, you might also remember Gary Harris
What are those 3 black hoses coming out of the top of your dash? Auxillary heater core?
si señor
is there a list anywhere as to how the engine is built? like what components are used, turbo, headgasket, turbo manifold and so on :) i would just really want to know what goes into making the engine withstand so much power considering the block with turbo from factory only got 150 ish HP..
Can you do 100-200 km dragy test, so curious to know what time can a 400 whp redblock do
early 960 wagon has 3.3 - which is useless with the toyota auto that comes in them but will suit that box well by the sounds of it.
Can we see a burnout through all the gears??
"No cops please" Puts everything out on YT🤣
@driftsnlifts
2 жыл бұрын
I didnt want the mexican cops on my ass. Would make it hard to cross the border to get home
@williamgreer4087
2 жыл бұрын
@@driftsnlifts haha I watch SO many of your videos before I realised the whole Mexico thing was a joke 😂
Out of curiosity how fast will those ZF transmissions allow you to go?
Did you ever learn to slip shift the M46’s?? ( like, without the clutch)
Be carefull with the slipping clutch! Its gonna make some serious damage when the clutch explodes
What upgrades should I toss at my 1990 760 turbo? Shooting for 250-300hp
Hey man, I'm planning on manual swaping my 91 NA wagon. In the far future I also plan on boosting it with a intercooler to around 200hp. Do you think it's worth having the m46 over the m47? I've heard the m46 is slightly stronger but they are both pretty shit and will blow up. I want a t5 swap but at the moment I don't have the time or extra cash to do that swap so I'm going with a plug and play m46/47 swap. What trans is in your car?
@bilbine5766
2 жыл бұрын
just buy a m45 if you dont mind 4 gears
What clutch are you using? :)
What boost control setup you have?
Gnarly
i have 3.31gearing and 5 speed zf in my volvo 965 16v turbo right now. before i have 3.73. but if i whas you i had lock after 3.08/3.15 gearing if you will have more car for the monny. but will you only drift are 3.31 a good gearing :)
@CzMnHD
2 жыл бұрын
I have 3.15 for volvo dana 1031 brand new from bakaxeldelar sweden. Works really well with zf 5 speed.
So is your pcv setup an ideal setup or should i go with something else??
@svinkuk2652
2 жыл бұрын
you can put a pcv outlet where the distributor would go in a 240, on the 7/940's theres a freeze plug there instead, just poke that out and make a connection for some tubing to go in its place, ive seen a guy who ran a 500hp redblock who recommended that along with the original outlet, theres a vid on youtube of the car, but its in swedish, if you wanna watch it just search "Stevens Volvo 740 GL Turbo 500WHP + 4th gear burnout och Info om bilen"
Satan vilken maskin
What spring rate do you run?
What are your top speeds in the lower gears, 1, 2, 3, 4? 5th = 210kph - same as my DOHC turbo holset mini truck with 4.4 rear and 0.9 fifth lol, nearly useless.
Spinning like a frickin cat!!!
fkn right sendit
What diff are you using?
@Itsme-sr8rp
2 жыл бұрын
3.73
What turbo are you running on that?
@driftsnlifts
2 жыл бұрын
He341cw holset
He341?
Dude i was wondering if you ever got in touch with Magistern. He's just a loony as you are when it comes to volvos. only difference he's from sweden and puts 800hp in a b230 like no effs given ;)
What is done to this?
So you're saying I need to get a Volvo for my first drift car? :)
3:50 not even breaking the law, zero km/h I seent it!
Rad
You're an awesome driver, who obviously got permission from the kids guardians, but how bout an empty parking lot instead of a public road? My oldest is about that size, and we do donuts, just not where we can hit others.
@driftsnlifts
2 жыл бұрын
If there was a parking lot nearby id be all for it. But the nearest empty parking lot is easily an hour away. This area of bc canada is super condensed and there really isnt any vacant land anywhere.
Ok blablabla wheres my gravy facial ?
Just out for a rip are ya bud
"My e brakes pretty poop" my guy Is too Canadian to say *shit*
Still using m46 with 450hp? How it is not broken XD
@driftsnlifts
2 жыл бұрын
Zf S5d 310z bmw transmission
Hate it when people give you crap for street drifting.
The better of a driver you become the worse it gets.