Пікірлер

• 
  @gilbertogomes706314 сағат бұрын

  Thanks for the video… Very helpful 😃

• 
  @JRMSweeps12 сағат бұрын

  Welcome!!!

• 
  @danbaker7845Күн бұрын

  Thank you!

• 
  @JRMSweeps17 сағат бұрын

  Welcome

• 
  @agumchakkalkuwa6785Күн бұрын

  You are the saviour

• 
  @JRMSweeps17 сағат бұрын

  Thanks!

• 
  @drophammer776Күн бұрын

  Little advice: When launching and taking boat out water, unplug your lights. Hook them back up before you head out on the road. These taillights after a harsh winter outdoors can create a pinhole leak on the seals.

• 
  @JRMSweeps17 сағат бұрын

  Fished them 2 yrs, nothing. Keep em covered.

• 
  @nose2wind8722 күн бұрын

  You didn't mention brakes. How do you go from 4 flat trailer connection to 4 wire, yellow, white, black, red? Black is ground, that goes to white trailer connector...Red is brake light(which trailer connector wire?) White is tail light (which trailer connector wire?) Yellow is turn indicator (trailer wire connector wire?) Thanks

• 
  @JRMSweepsКүн бұрын

  Pretty sure the brown tail light wire is also the brake wire...

• 
  @nose2wind872Күн бұрын

  So that will give both, running lights and bright brake lights. Brown to red...Will check that out.

• 
  @JRMSweepsКүн бұрын

  If u hook everything up like i did, everything will work perfectly. Blinkers, tunning lights, brake lights! Provided ur trailer connection and fuse is good.

• 
  @nose2wind872Күн бұрын

  @@JRMSweeps No, your example is missing wires. I have 4. The black goes to white, that is ground. The Green and Yellow are turn indicators and only one goes to the side that is relevant, a yellow wire. That leaves 2 wires, white and red. Red is stop. White is lights, you cannot use brown for both?

• 
  @JRMSweepsКүн бұрын

  @nose2wind872 every works on my trailer, sorry, from this vid.

• 
  @MrPontiacfever2 күн бұрын

  You can build mine

• 
  @JRMSweepsКүн бұрын

  Prob not

• 
  @fiuymi20202 күн бұрын

  This is the perfect video! It was right to the points I needed. Subscribed.

• 
  @JRMSweeps2 күн бұрын

  Excellent and ty for the sub!!!

• 
  @deirdrebenjamin70853 күн бұрын

  I really wish you had shown the step by step parts for the inlets. I really just need help figuring out where certain things go. But nice video nonetheless

• 
  @JRMSweeps3 күн бұрын

  Ty. I used the instructions from the pool.

• 
  @Emunah8593 күн бұрын

  0:58

• 
  @walterrhoads64103 күн бұрын

  Thanks! Good video!

• 
  @JRMSweeps3 күн бұрын

  Welcome

• 
  @AndrewPorter104 күн бұрын

  Great video. Thanks for the help

• 
  @JRMSweeps4 күн бұрын

  Thanks for the comment and glad the vid helped you out 🤙.

• 
  @drigman63624 күн бұрын

  Trash

• 
  @JRMSweeps4 күн бұрын

  thanks for watching! Love your content!!!

• 
  @peterlevan47195 күн бұрын

  Just got a 2016 never used...never started. Thanks for sharing.

• 
  @JRMSweeps5 күн бұрын

  Yes sir. Been a great little engine so far.

• 
  @bijibocil57665 күн бұрын

  Tuna steaks is so underrated fr 🐟

• 
  @JRMSweeps5 күн бұрын

  That is no lie. Absolutely amazing on a charcoal grill. 👌

• 
  @bennygregory26295 күн бұрын

  How would u wire this on key switch on 1995 1200xl sportster

• 
  @JRMSweeps5 күн бұрын

  That I am unsure of.

• 
  @macmj55375 күн бұрын

  omg thank you !

• 
  @JRMSweeps5 күн бұрын

  Welcome

• 
  @macmj55375 күн бұрын

  @@JRMSweeps Happy 4th!

• 
  @JRMSweeps5 күн бұрын

  Happy 4th, from our 11 rescue dogs that live with us to your fam!!!

• 
  @lynnium_5 күн бұрын

  Thanks! Bought my YJ about 2 years ago, it’s an amazing little fun Jeep to drive, this makes it even better!

• 
  @JRMSweeps5 күн бұрын

  Enjoy Jeep fam. We sold this one yrs ago but still have our 15 jk.

• 
  @christopherdecker44207 күн бұрын

  I have this vehicle but there is no bulb inside the tail light

• 
  @JRMSweeps7 күн бұрын

  There should be 2!

• 
  @JRMSweeps7 күн бұрын

  Unless yours are led???

• 
  @javierapichardo7 күн бұрын

  Nice work thanks for sharing!!

• 
  @JRMSweeps7 күн бұрын

  Yes sir, thank you.

• 
  @RPRUCH778 күн бұрын

  What size home depot string?????

• 
  @JRMSweeps8 күн бұрын

  It depends on your trimmer. I dont have this one anymore, so I couldn't tell you. I am sure you could go to your manufacturer's website and download a manual.

• 
  @user-ru2gu1zn3s8 күн бұрын

  Thank you so much man,,really helped

• 
  @JRMSweeps8 күн бұрын

  Glad it helped.

• 
  @cphil122510 күн бұрын

  A true quick and easy. Nothing excessive. You have earned a subscriber and a friend.

• 
  @JRMSweeps10 күн бұрын

  Thank you friend. Muchly appreciated!

• 
  @efendizil11 күн бұрын

  When I attach the longer blade on the drivers side, it extends over the windshield onto the top of the roof. What am I doing wrong.

• 
  @JRMSweeps11 күн бұрын

  Are u using the right blade attachment? Did it seat all the way? Did you buy the right size wiper?

• 
  @efendizil10 күн бұрын

  @@JRMSweepsYes, I bought a 24" and a 17" as advertised by the vendor for the 2011 328 coupe only. I have three attachments and use the only one that would fit the configuration of the arm and blade. It fit but the end of the blade left a space at the top and did not "snap" into place. Can you provide a video showing how to mount it?

• 
  @efendizil10 күн бұрын

  @@JRMSweeps I'm using Trico Tech 17" x 24". Video I used....kzread.info/dash/bejne/dGttyNGKm6bNlJs.html

• 
  @JRMSweeps10 күн бұрын

  Seems like the attachment may be wrong, idk. I bought my blades at wally world. I wish I cpuld help you more but i am not sure tbh.

• 
  @Radsmachine11 күн бұрын

  Thanks for the idea. those things cost a pretty pennie. How did you do the bow stop? PVC?

• 
  @JRMSweeps11 күн бұрын

  This is the video on the PVC bow stop: kzread.info/dash/bejne/qXp63NKmZq6zabg.htmlsi=xJ4Y3s1h55n9zZ6F I went on to Marketplace and found a junk boat trailer that had a galvanized bow stop and winch on it for $60 that was in perfect condition. I have since replaced the PVC one for that, but the PVC bow stop did great, given it was from parts I already have.

• 
  @mame-lomamee12 күн бұрын

  i have a 2008 town n country my radio is acting up and peeling,so basically i can not get one from the junk yard and stick it in?

• 
  @JRMSweeps12 күн бұрын

  Unless you have the vin, no.

• 
  @Maurquece12 күн бұрын

  If you ground that white wire would that eliminate the need to run a ground wire all the way to the taillights?

• 
  @JRMSweeps12 күн бұрын

  Idk tbh

• 
  @giovanninila970910 күн бұрын

  Yes you don’t need to run ground wire to each taillight you can ground it anywhere and should work I’ve done it multiple times

• 
  @JRMSweeps10 күн бұрын

  Ty for the great info.

• 
  @alyssaarmstrong13 күн бұрын

  Yo i subscribed

• 
  @JRMSweeps13 күн бұрын

  TYTYTYTYTY!!!

• 
  @alyssaarmstrong13 күн бұрын

  Yo i pray for your dog

• 
  @JRMSweeps13 күн бұрын

  thank you so much. She is doing pretty good so far. We have been lucky to have had the opportunity to continue her life with us in good spirits!

• 
  @Backroadmuscle13 күн бұрын

  So i have a good questoin since the starters mounted too the engine block would ir be better too still run a ground too negative on battery or frame distribution or none at all leave grounds alone rely on grounds i have equiped on or around block but not directly on starter bolt

• 
  @JRMSweeps13 күн бұрын

  pretty sure the starter itself has to be grounded. i would ground it to the frame.

• 
  @harrygmarshall515713 күн бұрын

  Good job Billy 👍🏻👌🏻

• 
  @JRMSweeps13 күн бұрын

  Thanks Gertrude!

• 
  @WalterBurton13 күн бұрын

  Thanks again. Back 4 months later to ask everyone: Can we have a conversation about lining up the armature things that connect the clock to the soap dispenser? Surely there's a trick to this?!

• 
  @JRMSweeps13 күн бұрын

  Idk ¿

• 
  @theclaybeartravels359614 күн бұрын

  I find it odd that my AC works fine, and when I take my car to a tire shop to get the tires done, all of a sudden, the AC doesn't work. Then, when I took it to my regular mechanic, he told me that my Shrader valve needed to be replaced. Is there some racket going on here?

• 
  @JRMSweeps13 күн бұрын

  Could be a coincidence idk...

• 
  @theclaybeartravels359613 күн бұрын

  @@JRMSweeps yeah, I'm kinda alluding to the idea that the tire shop guys have the same type of tool for removing tire valves that this video uses to remove a shrader valve

• 
  @JRMSweeps13 күн бұрын

  That is possible...any reviews on the via google maps about aomething like that?

• 
  @ashleyabsolutely478514 күн бұрын

  This video helped me about 3 years ago and I came back just to watch it one more time since I haven't fired up a grill since I last watched this video. Thank you!

• 
  @JRMSweeps14 күн бұрын

  Oh heck yeah, that is amazing!!! Don't forget to sub & share!!!

• 
  @Adrianbanda269614 күн бұрын

  Thanks

• 
  @JRMSweeps6 күн бұрын

  Welcome

• 
  @JW-ot5zq14 күн бұрын

  Finally found the video that explained it well enough for my simple brain to comprehend. Thanks dude!!

• 
  @JRMSweeps14 күн бұрын

  Very welcome!!!

• 
  @FishN-More15 күн бұрын

  Saw the nav light on the back left of the boat and was thinking of buying it is it worth it?

• 
  @JRMSweeps14 күн бұрын

  Well, I have yet to use it, but given it was so cheap to buy, I like having it in case I need it.

• 
  @user-db9lc7gn8o15 күн бұрын

  I took it apart an now i cant get it back on💀🥱🤦

• 
  @JRMSweeps15 күн бұрын

  That is the easy part.

• 
  @dannyzukko891616 күн бұрын

  Did your ac stop working because mine did when I put a new battery in it 😅

• 
  @JRMSweeps16 күн бұрын

  that pos we owned a/c quit working 2 yrs after we bought it with 65k miles on it. nothing to do with the new battery.

• 
  @597158madroofer16 күн бұрын

  when cutting the boards how much do you allow so you can install them on the trailer ?

• 
  @JRMSweeps16 күн бұрын

  goodness, I really can't remember...maybe nothing more than a 1/4" or less. I didn't want them to be too short after they popped in to place and not fit on the front and rear lip of the trailer. You could always cut them to the full length you need, try the fulcrum like I did in the vid, and if they don't go in, cut a tad off.

• 
  @TheIslandExpat17 күн бұрын

  That looks super nice.

• 
  @JRMSweeps16 күн бұрын

  thanks man!

• 
  @jasonparker667018 күн бұрын

  Stupid question but I have a 2021 ram 1500 big horn. I'm hoping this is just as easy

• 
  @JRMSweeps18 күн бұрын

  Should be, yes.

• 
  @jasonparker667017 күн бұрын

  ​The bulb that was burnt out was super easy to change. I thought heck two bulbs mise well change the other side. The stupid plastic clip broke on that side. Decided that's future Jason's problem lol thank you!

• 
  @JRMSweeps17 күн бұрын

  @@jasonparker6670 Future Jason, hilarious. Those clips are goofy when taking them out for sure.

• 
  @jasonparker667017 күн бұрын

  @@JRMSweeps yeah I was so excited when I was able to change the first one almost as quickly as your video. Second one made sure I remembered I'm not good at this stuff

• 
  @JRMSweeps17 күн бұрын

  @jasonparker6670 but you did it tho. I have a link in the vid description for some of those clips you can get on Amazon, fyi.

• 
  @boopyondasnooty18 күн бұрын

  Look how much you have to hastle with electric mowers. Investment for homeowners to be suckered into, making more slave work for starving and dying people across the world. So that you can feel better about "helping the world" with your shit electric mower.

• 
  @feralmagick717718 күн бұрын

  Thank you so much. I couldnt figure out why my pump wasnt working at all even though it was plugged in and water was at level!

• 
  @JRMSweeps18 күн бұрын

  Very welcome. Stay cool!!!

• 
  @robertj311618 күн бұрын

  I had dish back in 2005 to 2010. That piece is still on my dish and they never charged me for it. You can have mine if you want it.

• 
  @JRMSweeps17 күн бұрын

  Man I appreciate it. Ours was pole mounted. I was surprised they asked for it back. Absolutely the shi&+iest customer service I have ever experienced as well.

• 
  @robertj311617 күн бұрын

  @@JRMSweeps I didn’t have good luck with dish and their signal. They installed the dish on my roof and it kept going out found out. It was pointed in the wrong direction asked them to come fix it. They wanted to charge me $75 so I canceled them and got DIRECTV which they kept jacking up the prices. service failed with any kind of storms so I cancelled them about six years later took the equipment back to them. All they wanted was the Sim card , and three the rest of the equipment away while charging me for the equipment??? I got Comcast cable which was a freaking nightmare cost wise, every nine months they would jack their cost up until they got $179 a month for a signal that’s going to a ped in my backyard regardless whether I’m using it or not, they would not bring their price down. Nice To know that if you needed to, you can get some of the stuff for free.

• 
  @user-ww1oe8um6i19 күн бұрын

  Thanks

• 
  @JRMSweeps19 күн бұрын

  welcome

• 
  @alancummings565120 күн бұрын

  Nice bass. I used to fish that area.

• 
  @JRMSweeps20 күн бұрын

  Thanks. Haven't fished there in prob 6 months. Weather has been crazy this yr.

• 
  @alancummings565119 күн бұрын

  @@JRMSweeps yes I know. We have had so much rain from north of Dallas down to Galveston and east. All of east Texas lakes and rivers are at flood stages or close to

• 
  @JRMSweeps19 күн бұрын

  @@alancummings5651 for realio...im done for this year since last march lol

• 
  @OwenC121 күн бұрын

  A few things as a former dish tech. Having the dish on your house is the single most reliable option. Your house is very unlikely to shift or move. As opposed to a pole (which is foam placed in a hole) or a fence. Second, whoever installed your dish was a moron. I can see a barrel in that line. Not only is there an unnecessary barrel but it’s just hanging there with no drip loop. Water WILL seep into those threads and corrode the stinger Third, Dish, when I worked there, does not want the LNB (three eyes on the end) back. It’s cheaper for them to leave it on your house and hope you return to their service. Your experience with dish will greatly depend on your installer.

• 
  @JRMSweeps21 күн бұрын

  Tell that to anyone who is incapable of climbing a ladder, getting on the roof, and retrieving the parts Dish wants back. Silly af.

• 
  @OwenC120 күн бұрын

  @@JRMSweeps They don’t want the parts back. Old policy.

• 
  @JRMSweeps20 күн бұрын

  That was as of last year...

• 
  @thomasberg27022 күн бұрын

  I’m reaching for my gas trimmer after about 5 seconds of that.

• 
  @JRMSweeps22 күн бұрын

  And the 2 stroke oil, gas, new carb, fuel lines, 🤣🤣🤣

• 
  @theresarogerssimpson128023 күн бұрын

  Thanks so much I did this today it works like a charm.

• 
  @JRMSweeps23 күн бұрын

  Welcome. Still doing this to this day!

• 
  @user-sd1wk3nd3y24 күн бұрын

  Just helped me

• 
  @JRMSweeps24 күн бұрын

  Awesome!