Пікірлер

• 
  @agssaran924718 күн бұрын

  Super very useful ❤

• 
  @RoninsCorner18 күн бұрын

  Glad to hear that!

• 
  @raybama154Ай бұрын

  I try to fill my generator but nothing came out ?

• 
  @TreeismeАй бұрын

  Changed the light bulb, thanks! Now having trouble aligning the screw to put the fixture back up 😅

• 
  @alextenorio-torres10703 ай бұрын

  Don't forget to turn your breaker and switch off. Majority of electrocution deaths each year occur at the 120V level.

• 
  @justinl80783 ай бұрын

  I never thought it’d be this simple thank you!

• 
  @RoninsCorner18 күн бұрын

  Happy to help!

• 
  @brucelincoln37813 ай бұрын

  Literally life changing

• 
  @RoninsCorner18 күн бұрын

  I know right? Before I learned it I had to tie my shoes allll the time

• 
  @Risha-Rene4 ай бұрын

  Funny dad joke😂😂😂

• 
  @kevinbagemehl65984 ай бұрын

  Awesome ty

• 
  @francineeubanks93274 ай бұрын

  I have a machine like yours but have yet to do any embroidery. Yours is the 1st I seen on the tube. 👍🏻great I would have done the samething to the hat only twice. 😅😊

• 
  @RoninsCorner4 ай бұрын

  Glad to help! Not everyone has those massive machines, and we all got to learn somewhere. =)

• 
  @francineeubanks93274 ай бұрын

  Thank you I just wanted to get something that sewed. 😊

• 
  @Cindy-qc7lo4 ай бұрын

  Is it safe to put acetone in the dishwasher? How do you make sure it’s fully cleaned out

• 
  @RoninsCorner4 ай бұрын

  The plastic and or stainless steel shouldn't be harmed by the acetone, but this is another reason I run it once after cleaning empty just to make sure it is cleared out. Thanks for the comment!

• 
  @shumailazeeshan89084 ай бұрын

  Ty for this

• 
  @RoninsCorner4 ай бұрын

  Glad it helped!

• 
  @afatsamoan5 ай бұрын

  got me with the bounce it song lol

• 
  @DingleFlop5 ай бұрын

  I appreciate videos like this that try and share the most basic information for, say, a new homeowner. My only gripe is that a fuse is not the same as a circuit breaker, but the distinction doesn't really matter for most people.

• 
  @RoninsCorner5 ай бұрын

  Totally agree! For those who don't know Circuit Breakers are reusable, and can be back on with a flip of a switch (like the in the video). While a Fuse is a one time item, and must be replaced when it turns off power. Maybe I will make a video on car fuses as to help explain the differences. Thanks for the feedback @dingleflop!

• 
  @plalm235 ай бұрын

  Thankyou so much!!! I had no idea how I was going to get that dome off. I just wanted to change the bulb. Its suchokd style, I I really didn’t think I was going to find it on KZread.💕💕💕

• 
  @RoninsCorner5 ай бұрын

  Glad it helped!

• 
  @chenghuapang75046 ай бұрын

  thats not true. my glass stick with the upper part and wont get off

• 
  @chenghuapang75046 ай бұрын

  it turns out my lights look like this but no light bulb inside, just a few LEd light particles. so it cannot be replaced with a lightbulb.

• 
  @RoninsCorner5 ай бұрын

  @@chenghuapang7504 I didn't even realize that was a kind of light out there. Sorry this one didn't help but good to know other styles are out there!

• 
  @reneebrooks27225 ай бұрын

  My dome light has no screw. It's just a plain dome that won't rotate left or right. Can anyone help with that?

• 
  @EvaIsabelS6 ай бұрын

  Thanks for a video is clearly 4 me.

• 
  @Mr._Clean16 ай бұрын

  Tysm😊

• 
  @drsilly83246 ай бұрын

  Thanks so much it helped alot❤

• 
  @JamEspenida7 ай бұрын

  Thank you so much! You’re a Time saver !! ❤

• 
  @latramatica14037 ай бұрын

  Hola, lo hice así pero se me enrolla toda la tela, y se para la maquina, puede ser por el tipo de puntada?

• 
  @RoninsCorner7 ай бұрын

  Sin ver su configuración, podría ser el archivo, podría ser la tensión de la máquina o un mal funcionamiento de la máquina. Ojalá pudiera ayudar más. - google traducido

• 
  @joceeporter42697 ай бұрын

  Thanks so much for this tutorial! I have a question -- you explained the size difference between sewing and embroidery thread.. what are the different use cases for both? Should we always be using embroidery thread (on both top and bottom) when embroidering?

• 
  @RoninsCorner7 ай бұрын

  When you embroider you should use embroider thread. You can try with sewing thread but it gets too thick and might cause issues with tension and it will not look right. When sewing you will see the thread on each side, while on embroidery the goal is to only see the top thread. Hopefully this is helpful, let me know if it doesnt so I can hopefully be more clear!

• 
  @AJDesignedIt7 ай бұрын

  Great video

• 
  @RoninsCorner7 ай бұрын

  Glad you enjoyed it

• 
  @sorefingertips26677 ай бұрын

  I’m confused how the date window would work for months with less than 30 days or does one have to set the day on months like February

• 
  @RoninsCorner7 ай бұрын

  Unless you have a REALLY fancy watch, you typically will need to advance that date for months less then 31. Example for February, I will need to go into the date change on my crown and advance it from the 28th to the 1st. And you would be good to go. Hopefully this is helpful, and if it isnt let me know I can try a different method =)

• 
  @TheGamingHolic7 ай бұрын

  Thanks man as i am have a new watck like this you have

• 
  @RoninsCorner7 ай бұрын

  Glad it helped and congrats on the new watch!

• 
  @TheLoLzSickKidz8 ай бұрын

  Thank you, mine was stuck.

• 
  @RoninsCorner7 ай бұрын

  Glad to have helped!

• 
  @TawnyC_8 ай бұрын

  The round nut on mine was rusted on and wouldn't turn. After I gave it a few whacks with a rubber mallet, it cooperated.

• 
  @RoninsCorner7 ай бұрын

  Percussive persuasion at its finest!

• 
  @jorgedominguez72598 ай бұрын

  Gas in cali is atleast 4.99 where I’m at if you go to any major city it like 5.8

• 
  @sunkorg8 ай бұрын

  What about plastic that had melted directly on the heating element itself?

• 
  @RoninsCorner7 ай бұрын

  That gets tough. While the exact method of operation varies depending on the dishwasher's design, most modern-day models feature a heavy-gauge wire with a ceramic coating that's attached to a couple different brackets. As the electrical current passes through it, the wire generates heat. We do not want to damage that coating. Try the hot water, the polish remover to soften it up, and ideally plastic putty knife to get it off. IF you have use metal, be very careful. Another way you could try is just do the heat cycle on your dish washer, do that for about 5 minutes, open it up and try to remove with the plastic putty knife. Hopefully this helps and good luck!

• 
  @TheAlabasterflask8 ай бұрын

  I use neither

• 
  @RoninsCorner8 ай бұрын

  What is your preferred method?

• 
  @richardforward60148 ай бұрын

  Only this video help me, thank you so much

• 
  @RoninsCorner8 ай бұрын

  Awesome! Glad it helped!

• 
  @filledepieuvre8 ай бұрын

  I just changed my bulbs in a dome light in an apt moved into this week thanks to this video. Thank you 🙏

• 
  @RoninsCorner8 ай бұрын

  Glad it helped!

• 
  @cyndi6hdz9 ай бұрын

  This may be a dumb question bit do you fill it up all the way to the top? How do you know, beside counting the quarters (which in my case is ALOT OF QUARTERS), where to stop? The rolls i buy dont have a marking line if that makes sense? Thanks anyhow!

• 
  @RoninsCorner8 ай бұрын

  I advocate for using the method of a known size, like with the pill bottle in the video. That way you count it once, you mark it, and repeat to the line over and over. Hopefully this is helpful!

• 
  @Freebands4609 ай бұрын

  Thank you

• 
  @user-kz3yq8pz8l9 ай бұрын

  I have a pen time watch and I don’t know how to get the time or anything. can you please help me out

• 
  @RoninsCorner8 ай бұрын

  Do you have a link of it? If it is a watch it should be fairly similar

• 
  @user-kz3yq8pz8l8 ай бұрын

  @@RoninsCorner it was I’m sorry I commented this when I couldn’t figure it out but I did. Thank you for your time though.

• 
  @RoninsCorner8 ай бұрын

  All good, glad you got it figured out!

• 
  @ChrisHansenHere9 ай бұрын

  *Premium in my case* 💅

• 
  @Idkmychannel9 ай бұрын

  Then lick your fingers if you get some on it

• 
  @motivationzunet9 ай бұрын

  Tks

• 
  @makler603310 ай бұрын

  Thanks 👍

• 
  @why252211 ай бұрын

  THANK YOU SO MUCH!!! SUPER HELPFUL!!!

• 
  @aver302911 ай бұрын

  Video skips around too fast between steps and you're not showing the 2nd step (on the other side of the fabric) before stamping it w/hammer. Also, include a video on how the snap pliers work.

• 
  @RoninsCorner8 ай бұрын

  Thanks for the feedback. I will look at making another video to help. =)

• 
  @homeguestunton11 ай бұрын

  This is basically rocket science to Gen Z but super easy to older generations. Do you know that 84% of Gen Z does not know how to change a lightbulb. 84% of Gen Z just call apartment maintenance to change the lightbulb or they get a man to change it. If they are still a child, they usually tell their parents to do it. Generation Z is mostly people in their 20s as well as teenagers. Gen Z does not know how to change a lightbulb. Lightbulbs are not hard to change at all yet for Gen Z, it is super hard to do. I heard this is also a problem for millennials but not nearly as bad as Generation Z.

• 
  @yuhvalentine4668 ай бұрын

  you wrote a whole novel about how bothered you are by people who can’t change a light bulb 😭

• 
  @boshlovely20024 ай бұрын

  that’s not only untrue but straight up dumb, Gen Z is the first generation born into the internet and Millennials are very good at working it as well if we don’t know we can easily learn by searching it up, compared to old people who are incapable of learning new things because they struggle with the internet the fact that you said something as ignorant as this proves your inability to educate yourself

• 
  @Gud2B_Blessed11 ай бұрын

  HI JUST FOUND YOUR CHANNEL THANK GOOD. I have the exact same butchee block but my crack is way larger and it cracked right at the sink and seperated significantly. I will be trying this method. Where did you get your clamps? And may I ask, my butcher is a darker stain than yours. I really want to lighten it...any suggestions? i dont want to ruin it. 😳 But first i have to address the cracked area. Any siggestions are welcomed.

• 
  @RoninsCorner11 ай бұрын

  I got the clamps from Harbor Freight, as they were cheap and used mainly for this project. No need to ball out if you are only using them once in a great while. For the staining. I am not 100% sure it will work, but I will say vinegar and or baking soda as a cleaner will do wonders on most stains. Like any stain fighter, test on an area that is inconspicuous, or one that only you would know, to make sure it works to your liking. Are you saying that the butcher block is connected to the sink? If so end grain wood is very sensitive to water as they expand and contract as it gets wet and dries out. I would address the root cause, then fix the block with glue, clamps, and a good soaking in mineral oil like the video shows. Hopefully this helps you in your journey!

• 
  @grm9495 Жыл бұрын

  Can i adjust my invicta backwards or it'll damage it?

• 
  @RoninsCorner8 ай бұрын

  Backwards should be fine, as long as it’s not during the date change window of 9pm and 3 am

• 
  @jeffparis8318 Жыл бұрын

  Where did you get that clamp?

• 
  @RoninsCorner Жыл бұрын

  Harbor Freight. I think it was around 10 dollars. Thanks for watching!

• 
  @otakunino5228 Жыл бұрын

  Tq❤❤❤

• 
  @sylsuzszadan970 Жыл бұрын

  I love my new watch!!! Almost broke a tooth trying to adjust date and time…ugh… now I know you unscrew. Your video is very informative and not too long. Thank you very much for explanating my new watch sooo well.

• 
  @PlutophobiaCure Жыл бұрын

  Who else has this response every time you see the price of gas? 😂

• 
  @TheMidnightModder Жыл бұрын

  Sheeeeeit 🤣

• 
  @tasicauniquelymade45310 ай бұрын

  Absolutely every driver 😅 we feel the pain !

• 
  @RoNoLabel Жыл бұрын

  Thank you Im new to embroidery and just tried this method and it worked. I'm definitely a new subscriber. Thanks for this video

• 
  @nijittwerdle9166 Жыл бұрын

  Just came across this video hoping to find a fix for a spring snap that won't hold... still planning on making another snap video?

• 
  @RoninsCorner Жыл бұрын

  Thank you for the suggestion. Let me see what I can do!

• 
  @Gregtries Жыл бұрын

  Great video!