Пікірлер

• 
  @georgecook51523 күн бұрын

  Brings back memories I built and flew that same plane mine had a Z-G38,many years ago.......

• 
  @saito1254 күн бұрын

  Beech, bro... Beech.....

• 
  @n64uwls6a5 күн бұрын

  50 hours of old memories full scale

• 
  5 күн бұрын

  Are there screws on the X20 Pro to adjust the gimbal spring tension or do you have to take the back cover off?

• 
  @n1114v5 күн бұрын

  Yes there are holes in the back of the TX for the springs

• 
  @kevinellerbroek18127 күн бұрын

  Great work Andy! Thanks for all the footage.

• 
  @DonTimmons-kh4dz8 күн бұрын

  I feel your pain man, just got back into the hobby after 30 years. Spent over $1200 on amazon to get started. NONE, of the listing I purchased from said anything about this. Why; 1) they want the sale "greed" might be part of it 2) I think amazon is behind all of this overregulation because they need free airspace to operate their drone delivery service. We are sheep, and the ama is not your friend!

• 
  @williamtucker27679 күн бұрын

  Not wanting to dwell in the past ... airplanes of that era typified a good day at the flying field. Goldberg produced two memorable kits in the category; this one, and the Ultimate Biplane. YS120's always found a home in mine. I was a better builder than flier, different aptitudes, I guess. As the hobby evolved (devolved?) to the "made in China" ARF choices, so did a lot of visceral enjoyment experienced in flying your own creation, either thru a kit or from scratch. But hey, enough about my thoughts! Thanks for the video!

• 
  @alessandrobertoncini113712 күн бұрын

  L'attrezzo dei buchi si può usare anche su un ala rivestita in balsa? GRAZIE complimenti x il lavoro

• 
  @secularsunshine903614 күн бұрын

  *Happiness is bathing in the light...* thank you.

• 
  @larryblanks676515 күн бұрын

  Hey Andy! Lookin great, nice kit. I watch your vids cause you give great ideas for planes. Royal blue and yellow. Good colors! That same colors were on my Dad's Champ, mine was royal blue and white.

• 
  @homienat337415 күн бұрын

  Great vid, great flying lads 👍👍👍👍👍👍

• 
  @homienat337415 күн бұрын

  Great vid mate, very nice ,can you point me in the right direction of the bi plane kits ,sopwith ,just can't get em here in Ireland , or the pup

• 
  @robertcovell278717 күн бұрын

  If he wants to get rid of that Waco I'll take it!!!

• 
  @charleshamitlon641617 күн бұрын

  That P-51 pilot sucks!

• 
  @n1114v17 күн бұрын

  You can tell he flies Spits!

• 
  @charleshamitlon641617 күн бұрын

  Perfect!

• 
  @richardrottenberk713317 күн бұрын

  I want one of those Yellow cubs

• 
  @richardrottenberk713317 күн бұрын

  Thanks for posting. I missed it this year wish I went Saturday now

• 
  @n1114v17 күн бұрын

  Saturday was fantastic

• 
  @tennriverluver353417 күн бұрын

  I watch all these magnificent flying Eindeckers on your channel and it almost makes me sick. I wanted one forever and one day stumbled across a Dancing Wing 63 inch ARF. The damn thing is gorgeous, weighs next to nothing, and you'd think would fly almost like a trainer. This one also has ailerons but they are useless. This is the most difficult plane I own to fly in my current 128 plane fleet and nothing I have tried has helped. Part of me wants in the crumple into the ground and go home in a garbage bag if it weren't such a looker. Hopefully I'll find or build a larger one some day that'll fly like it should. Hope you get in several big events this year because I can watch these long videos over and over. Give me good inspiration while sitting and working on my builds. Oh and you should have kept the P-47! Can never have enough!😂

• 
  @tauncfester302213 күн бұрын

  If your Fokker E.III is glow powered how do you expect it to weigh "next to nothing"? You should buy one of AerodromeRC's 70" WS E.III kits and power it with a 500 watt electric. WWI ARF's weigh too much to fly slow and graceful. The challenge would be to set it up like the real aircraft with an under-cambered airfoil and wing warping and learn to fly coordinated rudder/wing-warping turns. and discover that a full flying tail and rudder have far more authority than a model with separate stabilizers/elevators and fin/rudder.

• 
  @DonDegidio18 күн бұрын

  Hi Andy, Thanks for the two videos. That first video really showed the wind bucking around the planes. Jim made an awesome landing with his P-47. I really liked the flight of that F-86. The P-47 bomb drop was a nice extra. Want to add a bomb drop to my Carolina Customs kit.

• 
  @robertcovell278720 күн бұрын

  The Waco is gorgeous!!! And the engine in the Zero sounds real good.

• 
  @n1114v20 күн бұрын

  It's good stuff!

• 
  @craigbeaven844520 күн бұрын

  That Monocoupe !! NICE !

• 
  @stevecoggins259120 күн бұрын

  Thanks man. Always love seeing your videos and those beautiful planes. Take care brother.

• 
  @n1114v20 күн бұрын

  Thanks Bud!

• 
  @rickrader164920 күн бұрын

  Thanks for sharing…love these events…love your video skills!

• 
  @n1114v20 күн бұрын

  Thanks buddy!

• 
  @andrewcampbell71520 күн бұрын

  Finally!!!! I’ve been waiting for some new footage. Love your channel, you do a great job!!! Keep up the great work! Until the next video….😉

• 
  @rolandtheheadlessthompsong434620 күн бұрын

  Thanx Andy!!

• 
  @warbirdflyerF4U20 күн бұрын

  Great video Andy thank you for sharing there are some beautiful birds flown In pretty terrible wind😊

• 
  @wagner2431420 күн бұрын

  why in god green earth is there a fence on the end of the runway.

• 
  @n1114v20 күн бұрын

  It's there as a barrier for the road, and to keep people from driving onto the runway

• 
  @wagner2431420 күн бұрын

  @@n1114v i think i would make the thing removable for flying events just my 2 cents

• 
  @n1114v20 күн бұрын

  @@wagner24314 a fence is like a tree, just dont hit it! Removing the fence could allow a plane to go off the runway a possibly hit a car...... commonsense! !

• 
  @larryblanks676521 күн бұрын

  Great vid, Andy . Can't wait for part 2!

• 
  @tennriverluver353421 күн бұрын

  Brave souls! Our first event was about the same. Great turnout and about 200 planes. Gorgeous 75 degree day with atrocious winds that kept most smart people grounded. I lost my Seagull Decathlon about like that J3 Cub when a gust of wind hit at the wrong time on takeoff. Was lucky to have an identical spare in the box at home. Keep'em coming Andy!

• 
  @dougyaroch674121 күн бұрын

  Good video Andy with the tough conditions.

• 
  @n1114v21 күн бұрын

  Saturday definitely made up for it!

• 
  @kirkwheeler544221 күн бұрын

  Hi Andy. Sorry i missed this year. I will be at Ghoshen end June. I have tent reserved if you're plan on attending and need a spot. Im bringing my new CARF P47 plus two other planes

• 
  @n1114v21 күн бұрын

  Hey bud! I'll be at Goshen for sure. Look forward to seeing the new 47

• 
  @jrichey7321 күн бұрын

  Awesome flight man. Beautiful bird, great piloting!!! Thanks for sharing.

• 
  @larryblanks676522 күн бұрын

  I always learn new tips and tricks from you Andy!

• 
  @scotto554826 күн бұрын

  Pop in the xjt module and BOOM, now you can use your old receivers 😊

• 
  @scorpion303067Ай бұрын

  Hello andrew my dad has a byron zero and i was wondering if you knew where we could find a set of byron retracts not robart i think i saw you have a byron zero

• 
  @n1114vАй бұрын

  Sorry, I don't have a set. Any byron gear are very hard to find these days

• 
  @scorpion303067Ай бұрын

  @@n1114v ya I know but ty for responding. Is the museum still open tho

• 
  @n1114vАй бұрын

  @@scorpion303067 yes it is.

• 
  @youknoweverything7643Ай бұрын

  Did you paint that whole plane and sheet it all in a full I. Everything then paint that whole plane. If that is paint man that's a beautiful plane wish I had the patience to build a beautiful painted plane like that. I just finished a 35 percent scale extra 300 and I sheeted it all in and painted it using ppg paint and 2k clear which is a high gloos hard sealing mirror like finish gloss clear coat thats a two part clear and its glow fuel proof I foind out. And I clearcotwd the vynil graphics over as well. But trying to sheet in and paint a plane yours size and smaller is alot more work and sanding cause of weight

• 
  @n1114vАй бұрын

  It's all covered in monokote

• 
  @JKinFW5775Ай бұрын

  I’d like to see you put the chipmunk thru the paces like that flight. Nice flying Andy

• 
  @n1114vАй бұрын

  The big chippy cant take that kind of abuse

• 
  @JKinFW5775Ай бұрын

  I wasn’t sure, thought I’d ask….

• 
  @winnipegperfectcircleflyin7859Ай бұрын

  ive seen a lot of ppl miss the boat on the cowl air intakes. You need to drill around the intake and pop out the center. Take a look at the full size chipmunk's cowl. People wonder why they cant get a good engine run because they dont have enough cooling. The math is the area of the air outlet should be double the air intake.

• 
  @n1114vАй бұрын

  Been flying it for 5 years! Runs perfect. Never had any engine issues. I've been doing this for many years.......never have I had engine problems with any of the hundred plus planes I've built

• 
  @federicocanella7006Ай бұрын

  Weight please?

• 
  @n1114vАй бұрын

  Never weighed it......sold it years ago

• 
  @autogyro333Ай бұрын

  Elvis lives and flies RC planes, nice!

• 
  @Horja_bАй бұрын

  Nu inteleg de ce trebuie sa ragai de fiecare data....numai porcii fac asta .... tu vrei sa zici ceva ? sau e o probelema de cultura prin care tu vrei sa ne transmiti respectul si politetea ta pentru noi si in acest caz imi cer scuze. Totusi acest zgomot este asociat cu porcii. Always burp?????? is it a noble sound in the english culture or the highest statement of respect and apreciation for viewers ....witch it is mostly pig associated or I had really bad understand of the meaning and I am humbly ask for your forgiveness. For some cultures this means a tres mal éduqué gars .... So sorry but I wil not go further with this. Bonne continuation et meilleures appréciations pour votre professionnalisme."I am humbly apologize for all an above .... "Me and reading not going well" says everything. Mes excuses

• 
  @patricioac546Ай бұрын

  Incredible, I come from your other video, that of the Carl Goldberg Sukhoi 26. I never imagined that I would see this video again, I saw it on VHS in the mid-90s when I was a child and now I find it here. Thank you very much for uploading and sharing it, it brings back so many good memories of better times. Greetings from Chile.

• 
  @patricioac546Ай бұрын

  Impressive flight. In the mid-90s when I was a teenager, the person who taught me how to fly RC planes had this same Sukhoi but with the classic red and white decoration, it was the largest and most impressive plane in the club, unfortunately it only lasted a couple of flights before being injured in a crash. I never saw one of these again but it always left me with the impression that there was a flaw in the airfoil design but it was contradictory since it was a Dave Patrick design. This video clarifies to me after 30 years that this plane flies really well, I imagine it is not like the modern ultralight designs with 3D capabilities but upon landing it can be seen that it floats very well. Awesome Snaps, Tumbles and Lomcevaks. Greetings from Chile, the southernmost country in the world.

• 
  @nheatherАй бұрын

  I have an X20S - I like the PRO but at twice what I paid for the X20S it is very difficult to justify. I prefer the squared-off bottom and the paddle switches but that really isn’t enough. I also prefer the side knobs to be pointing down - so much so I bought the optional knobs but haven’t fitted them - the reason is that you can’t use them with the grips fitted and I think the X20/S needs the side grips. I guess you could cut away part of the grip to accommodate the optional knobs but I wouldn’t like to do that.

• 
  @rezdog311Ай бұрын

  Something that foam and electric will never match, beautiful birds with the sound of actual engines instead of no sound at all..

• 
  @don-mclАй бұрын

  Good show and greased that landing! Keep those old ones flying!

• 
  @sjanninckАй бұрын

  Thanks Andy!

• 
  @shelleibach20Ай бұрын

  hard to believe that the hornet with those terrible sounding motors and fans was state of the art......Oh thank you so much turbine developers!!!!

• 
  @n1114vАй бұрын

  The ducted fan days were fun!

• 
  @shelleibach20Ай бұрын

  Befoer my time in the hobby.....tks for the video cool to see the GOOD old days

• 
  @Mikeylikesit1968Ай бұрын

  My Dad flew in lots of scale contests and did a few Scale Masters, Scale Squadron of California and the 1/8th Air Force . My Dad was Roland Baltes

• 
  @Shaunmclean12Ай бұрын

  Hey, Andy. Thanks for sharing the video it was funny and enjoyable to watch. There were some good-looking models there as well. I would Like to get hold of one of the transmitters to put on the shelf. Good show 👏 👍

• 
  @warbirdflyerF4UАй бұрын

  Great job on the resto Andy😊 The Saito 150 was not their best offering But you can work on them and get them to tune properly I could hear a slight bit of detonation during your flight at full throttle Indicating a slight lean condition The 150 was notorious for that As they actually had very high compression ! Definitely get her rebuilt and convert to Ignition You will be much happier with the performance 😊