Have you thought about putting a sanding sealer down to hide the blemishes that might come through? Kinda like a primer coat. And you could always drop that project off on your way down to Ohio! Have a nice trip!
@n1114v
5 ай бұрын
I have in the past but it causes interesting problems with the covering over time
@thercbarn5001
5 ай бұрын
@n1114v gotcha. Only thing I've ever done was used mogpog to get better adhesion.
@WalterMitty19665 ай бұрын
Hi Andy , great vid as usual , Sir !! Are you on RCSB ? Merlyn Locks & Denny Box's Rule !! lol Cheers from England Phil
@ericchild88455 ай бұрын
I have build shop envy something fierce right now…
@1BatJam5 ай бұрын
Sup Andy ❤good to see you building again
@michaelgallant76155 ай бұрын
Looking good...I really don't get or know how some builders/ flyers can build a plane and when done go right back to building another...With me i build a goldberg or great planes kit and i need to take a break for at least a few months....Almost like i don't want to look at balsa wood at all...Especially another box full of bits and pieces....
@n1114v
5 ай бұрын
When there is snow outside I need to stay busy
@woutersmith76165 ай бұрын
Great Andy🤠🛩️🇿🇦
@warbirdflyerF4U5 ай бұрын
Looking like another great build andy 😊 I recently had very similar situation While working on a yellow aircraft starfire Restoration I ended up being offered 2 more 1 in primer and one complete new kit in the box Of course you know I had to get them Because they no longer exist 😊 Can't wait for updates on the completed one do you know what engine it has ? The big cat is looking great Probably won't have mine done this winner but I'm trying 😊
@WarbirdPiLOT5 ай бұрын
Thats noe biiig Wing 😊
@kirkwheeler54425 ай бұрын
That's going to be a awesome Chipmont! What engine are you going to run on it.
@n1114v
5 ай бұрын
Hopefully I can find a DLE 111 for it
@lancegrey12255 ай бұрын
Thought you had the BEAR IN THE AIR!
@n1114v
5 ай бұрын
Not for a while.......its cold in Michigan
@DonDegidio5 ай бұрын
Hi Andy, That Super Chipmunk is huge. Keeping fingers crossed you can work out a deal for that ready to fly Chipmunk. Do you know of another source for foam wing kits similar to Eureka Aircraft? They seem to be MIA.
@n1114v
5 ай бұрын
You could always make your own foam cutter.....there pretty simple to make.
@DonDegidio
5 ай бұрын
Good Morning Andy, I had been giving that some thought. The Vigilante plans do give the root and tip templates for the wings, elevators and vertical fin.
@MrMadtractor5 ай бұрын
beauty
@user-mp6bc8vv3f4 ай бұрын
cheers
@n1114v
4 ай бұрын
Cheers buddy!
@short5stick5 ай бұрын
glass and paint all the way.
@n1114v
5 ай бұрын
Those days are gone for me
@alexisscott95735 ай бұрын
Perhaps you could do the retract version on this one now, then you would have two that are the same but different
@n1114v
5 ай бұрын
Way to late for that! The wing would have to be redesigned to fit retracts.
@alexisscott9573
5 ай бұрын
Just a thought, especially if you will have one flying 😂
@lancegrey12255 ай бұрын
You at IT AGAIN?
@n1114v
5 ай бұрын
Just a little bit!
@kirkwheeler54425 ай бұрын
How is that Bearcar secured to that stand? Looks like it's just balancing on the exhaust pipes. I just restarted my Meister FW190D build after a 7 year break!
@n1114v
5 ай бұрын
Its magic! Finally time to finish the 190
@lancegrey12255 ай бұрын
Why not say no? It ain't the same as building it yourself, The buddies supper
@lancegrey12255 ай бұрын
You have any planes for SALE?
@reckemroysrc37645 ай бұрын
Have a safe trip to Ohio 😅
@edkerkhoff5225 ай бұрын
I got a guy that is good to rebuild crashed planes but don't think I'd ever have someone build for me u seem b same way
@n1114v
5 ай бұрын
If I could afford a builder I definitely would!
@alwaysflying65404 ай бұрын
Hello_ what's your filler of choice
@n1114v
4 ай бұрын
Right now I'm using 3m hight strength
@TatayK5 ай бұрын
You should have shown how you put in the locks instead of describing them.
@n1114v
5 ай бұрын
You want me to cut the sheeting off and show how I did it?
@TatayK
5 ай бұрын
@@n1114v no not necessary, but if you could make a video of another plane it would be great if you could show how you did it. Anyway, excellent craftsmanship :)
@n1114v
5 ай бұрын
@@TatayK I posted a picture on Facebook of what it looks like before I sheeted it.
@alwaysflying6540
4 ай бұрын
I thought he did a great job explaining it. No video needed. I guess I'm smarter than I think
Пікірлер: 45
You love SHAPING. I KNOW IT. AND building!
"Pull the trigger, Roy!"
Have you thought about putting a sanding sealer down to hide the blemishes that might come through? Kinda like a primer coat. And you could always drop that project off on your way down to Ohio! Have a nice trip!
@n1114v
5 ай бұрын
I have in the past but it causes interesting problems with the covering over time
@thercbarn5001
5 ай бұрын
@n1114v gotcha. Only thing I've ever done was used mogpog to get better adhesion.
Hi Andy , great vid as usual , Sir !! Are you on RCSB ? Merlyn Locks & Denny Box's Rule !! lol Cheers from England Phil
I have build shop envy something fierce right now…
Sup Andy ❤good to see you building again
Looking good...I really don't get or know how some builders/ flyers can build a plane and when done go right back to building another...With me i build a goldberg or great planes kit and i need to take a break for at least a few months....Almost like i don't want to look at balsa wood at all...Especially another box full of bits and pieces....
@n1114v
5 ай бұрын
When there is snow outside I need to stay busy
Great Andy🤠🛩️🇿🇦
Looking like another great build andy 😊 I recently had very similar situation While working on a yellow aircraft starfire Restoration I ended up being offered 2 more 1 in primer and one complete new kit in the box Of course you know I had to get them Because they no longer exist 😊 Can't wait for updates on the completed one do you know what engine it has ? The big cat is looking great Probably won't have mine done this winner but I'm trying 😊
Thats noe biiig Wing 😊
That's going to be a awesome Chipmont! What engine are you going to run on it.
@n1114v
5 ай бұрын
Hopefully I can find a DLE 111 for it
Thought you had the BEAR IN THE AIR!
@n1114v
5 ай бұрын
Not for a while.......its cold in Michigan
Hi Andy, That Super Chipmunk is huge. Keeping fingers crossed you can work out a deal for that ready to fly Chipmunk. Do you know of another source for foam wing kits similar to Eureka Aircraft? They seem to be MIA.
@n1114v
5 ай бұрын
You could always make your own foam cutter.....there pretty simple to make.
@DonDegidio
5 ай бұрын
Good Morning Andy, I had been giving that some thought. The Vigilante plans do give the root and tip templates for the wings, elevators and vertical fin.
beauty
cheers
@n1114v
4 ай бұрын
Cheers buddy!
glass and paint all the way.
@n1114v
5 ай бұрын
Those days are gone for me
Perhaps you could do the retract version on this one now, then you would have two that are the same but different
@n1114v
5 ай бұрын
Way to late for that! The wing would have to be redesigned to fit retracts.
@alexisscott9573
5 ай бұрын
Just a thought, especially if you will have one flying 😂
You at IT AGAIN?
@n1114v
5 ай бұрын
Just a little bit!
How is that Bearcar secured to that stand? Looks like it's just balancing on the exhaust pipes. I just restarted my Meister FW190D build after a 7 year break!
@n1114v
5 ай бұрын
Its magic! Finally time to finish the 190
Why not say no? It ain't the same as building it yourself, The buddies supper
You have any planes for SALE?
Have a safe trip to Ohio 😅
I got a guy that is good to rebuild crashed planes but don't think I'd ever have someone build for me u seem b same way
@n1114v
5 ай бұрын
If I could afford a builder I definitely would!
Hello_ what's your filler of choice
@n1114v
4 ай бұрын
Right now I'm using 3m hight strength
You should have shown how you put in the locks instead of describing them.
@n1114v
5 ай бұрын
You want me to cut the sheeting off and show how I did it?
@TatayK
5 ай бұрын
@@n1114v no not necessary, but if you could make a video of another plane it would be great if you could show how you did it. Anyway, excellent craftsmanship :)
@n1114v
5 ай бұрын
@@TatayK I posted a picture on Facebook of what it looks like before I sheeted it.
@alwaysflying6540
4 ай бұрын
I thought he did a great job explaining it. No video needed. I guess I'm smarter than I think
@TatayK
4 ай бұрын
@@alwaysflying6540 I'm new at this😀