I'm Daniel Soulbuilt and I design and make cool things. Some of them turn into awesome products. Subscribe for all things Engineerable. SOUL BUILT is my brand for the cool things that I invent, make and sell:
KRVR Knives - I and my small team of craftsmen & craftswomen make custom chef knives with damascus blades and wicked cool handles. You'll find videos of individual knives that we have made, and I also post instructional videos to document the knife-making process and share our knowledge with you.
SoulBuilt makes EDC accessories like the MARKSMITH Titanium Bolt Action permanent marker.
I do unboxing and reviews of products that I buy for use by myself or at the ENGINEERABLE + SOUL BUILT shop. I spend a lot of time researching these products beforehand, so I already know that they are not shit when I review them.
I post a lot of DIY videos because I think it's important to document what we do as humans so that we can learn from each other and constantly improve.
Пікірлер
i took apart my motor and this silver circle piece came out i don’t kno where to put it
Hi I was wondering if you had any advice for a gel blaster surge trigger not moving.
Can you show how to change plastic gears to metal gears in hydro strike
My splat - r ball doesn’t work again 😭
Hey the Gelbee storm burst glow is on sale for $40 right now. I know its not on your 2024 best list, but would you recommend it for $40? Thank you and i love your content!
Very interesting. Never thought about it
Dope Intro, quite unique.
I hate to ask but is there a tracer for this gun like anywhere online I wanna do that uv light thing in the magazine but I wanna see if there’s a tracer first
@engineerable We need an actual video on how to open up the gear box and add new gears where’s the vid you promised us it’s been a year
What about the clip
when are these upgrade videos coming out😂
The only thing that will work is a remote controlled RC tractor in your gutter that runs every 3 day and pushes all debris out the trap door at the end. Alum with holes filters the big stuff and fine SS mesh clogs up with shingle stone. The tractor is the only winner.
@@timhowell1220 depends on SS micromesh mesh size. The stuff in this video does not clog at all with stones. The stones are too large to fit in the mesh openings. I have seen cheaper quality SS micromesh that has larger holes and could clog.
What is that spring called on 11:06 I tried taking apart the gun and I lost the spring please help me
I used this before and I made the mistake of putting it in a line and it didn't work so I was told to put the gel in little bead size now they are all gone
Can I have one?👏🏻
*get em while they’re young* the most uncreepy way this line has ever been used LOL
How do I fix my gun it’s making a high pitch noise and it’s this same exact gun I need help
Where can I find this??
Where can I find this??
Where can I find this?
Waiting for this video how long?
Is this better then srb400 and is this gun durable and will last a while getting one for my bday in 2 days and also I don’t have to do any upgrades unless I wanted more voltage if a battery just wanna make sure this gel blaster is good stock and will last a while 😂
how do I charge it 😭
Hi, does this work for a dyson v8, as we will be getting one soon. It's on order
I have always be horrified of roaches
it really helped that u didnt list where u got the parts
@@Random1616 Links to parts are in the description, and here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Is it possible to get metal gears on the Hydro Strike Pulsar Pro?
Well, obviously, but I mean, as like the gears and pistons are they similar and can I just go by this video for my pulsar
could i buy a metal gear box instead of just doing these modifications?
Hi. Excuse but mine doesn’t shoot the nails out😢
Yo my sector delay chip got ripped up when using it in 20 shots full auto. Where is the best place to by 3d chip that won’t get damaged and what type of plastic? Could I possibly use metal 3d chip?
@@PxckFlxpper16 was it 3D printed? Needs to be a tough material, like at least ABS. You can buy sector chips for airsoft and modify them as needed.
@@engineerable can you send me a link and how do I go about modifying them
All info here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
@@engineerable okay thank you but I’m inspired by you videos and I read your whole page from the link you just sent me. I’ve done everything you did just need to find a delay chip 3d printed online from someone who has 3xvery strong material. Do you know what type of motor I can upgrade that’s higher in torque since the stock one is 480 size idk what type of upgrade I would want that’s better then stock. Which one would you put in to replace the Stock?
So my splat r ball gun came with the battery on the left so when im done using the battery wait for it to cool off then charge it once it turns green just store it for the next use and then if I haven’t used the battery on a while charge it to make sure it’s green and that’s abt it?
If I haven’t used my battery in a while should I charge it to make sure it’s green and ready to go and if my battery full dies it won’t ruin the battery just wanna make my gel blaster battery last lol
will this work with a skd cs-007
@@user-oh9uo4di8p it should
This is good, now do you have a method of slicing via tablet then sending file to neptune 4 pro max?
Do you have any way to add a picatinny rail for the splatrball, like any links?
how do i find these ?
All info here: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Do you think disconnecting the led lights is worth it for battery preservation?
@@kingstonberry6021 no, the LEDs have an insignificant draw
Hey have you made a video about upgrading the srb1000 and putting metal gears in it plus a new piston?
It's the same gearbox as SRB400, so follow those instructions. All details and videos here: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works This is the SRB1200 teardown video kzread.info/dash/bejne/eH-ssq6OqNWvoLA.htmlsi=RZo313eCKfvR1vSJ
Easy spring to lose I lost it
Can you give me links or the names of the parts I need to install with the metal gears on Amazon
Links in the description or here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
I’m mad and happy at the same time, but now I wanna get one because I thought it was a rip off only 800 rounds. Now that I see they tried scamming
Thank you so much
Do you have any experience with the 2.44 fine thread adapter? My totes all have the larger diameter valve.
Here's a 2.44" fine thread adapter with garden hose valve - amzn.to/3Lcw4hk
@@engineerable Thanks, I am trying to figure out if there is a PVC option to link 2 totes together. I already have a few totes with the exact adapter you posted, 2 of which are connected by a garden hose and a Y adapter to provide more storage. I am looking for a solution that can provide a better transfer rate by using the entire 2 to 2.44" connection, rather than a garden hose.
@@Red_Sky_Farm_2023 Ok, so that adapter also has a 60mm buttress thread. What you can do is get a 60mm buttress to 2in NPT adapter, like this: amzn.to/3W8xIqt Then use the 2in NPT to 2in PVC adapter linked in description
@@engineerable Thank you, that makes a lot of sense!
Brilliant!!! Perfect solution for our StepVan conversion. I love the 8020 solutions!! Thank you so much for building and sharing this!
Can you do this for the srb1200 and put the links for the products you need?
@@Ramsesperezmarte It's the same gearbox, so follow these directions for taking the SRB1200 apart kzread.info/dash/bejne/eH-ssq6OqNWvoLA.html And then use the SRB400 metal gear upgrade instructions. Links for products are here: www.engineerable.com/single-post/upgrade-splatrball-srb400-to-metal-gears-and-stronger-spring-for-higher-fps-to-shoot-faster-harder
@@engineerable ok thanks
Were you able to replace the nylon nut on the handle with a metal one?
Does it spread to other cockroach how some gels do
Found this at my local Walmart for 32 dollars on sale, I grabbed 4 and had a blast with my friends
Where to buy another gearbox
Wait so if put a 11.1volt battery can I just change the gears in it or will it still break if I won't do the rest of the stuff