How to ADD WIFI to 3D PRINTER (ELEGOO NEPTUNE 4 PRO or any 3D printer with ethernet Klipper Fluidd)
Ғылым және технология
The Elegoo Neptune 4 and Neptune 4 Pro and many 3D printers have ethernet ports for direct communication over the network through a browser interface. However, it's hard to believe that it's 2024 and they still don't come with integrated WIFI. I found the easiest solution to add WIFI using a cheap WIFI bridge that is even powered off the printer. Takes less than 5 minutes to setup.
▼ WHERE TO BUY WIFI BRIDGE:
▶ VONETS WiFi Bridge - amzn.to/4ad8Ty3
▼ WHERE TO BUY PARTS:
▶ Neptune 4 Pro - amzn.to/49K1QNv
▶ Elegoo Neptune 3 Pro Printer - amzn.to/3sMAZ2O
▶ COMGROW 3D Printer Enclosure - amzn.to/3rIl44M
▶ DURAMIC 3D PLA Plus Filament 1.75mm - amzn.to/49L9CH3
▶ DURAMIC 3D TPU Filament 1.75mm - amzn.to/47OntL3
▶ Polymaker ASA Filament 1.75mm Black, 1kg ASA 3D Printer Filament, Heat & Weather Resistant - amzn.to/3sNz0ve
▼ VISIT OUR WEBSITE
▶ Products we make: soulbuilt.us
▶▶ Amazon Store: www.amazon.com/stores/SoulBuilt
▶ Engineering: www.engineerable.com
▼ FOLLOW US ON:
▶ Instagram: / soul.built
▶ Facebook: / soulbuilt.us
▼ Video Chapters:
00:00 How to add WIFI to 3D Printer
00:33 WIFI wireless bridge
00:51 Connect WIFI bridge to ethernet port
01:01 Connect the power (USB) to the 3D printer USB port
01:19 Where to install the WIFI bridge
01:39 How to connect to WIFI bridge to setup
02:25 WIFI bridge settings to connect 3D printer to WIFI router hotspot
02:51 How to connect to Fluidd Klipper interface on Elegoo Neptune 4 Pro 3D Printer
03:18 How to send a file and print over WIFI to Elegoo Neptune 4 Pro 3D printer
How To ADD WIFI to 3D PRINTER (NEPTUNE 4 PRO or any 3D printer with ethernet port) Wireless Printing
How to EASILY ADD WIFI to 3D PRINTER (NEPTUNE 4 PRO or 3D printer with ethernet port Klipper Fluidd)
How to EASILY ADD WIFI to 3D PRINTER (ELEGOO NEPTUNE 4 PRO 3D printer with ethernet Klipper Fluidd)
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY.
Пікірлер: 5
This is good, now do you have a method of slicing via tablet then sending file to neptune 4 pro max?
Very good, only missing feature is camera stream of 3d printer.
I followed these steps to a T and nothing. I can’t sustain a connection to the WiFi bridge for longer than 30 seconds before the webpage stops responding. But my WiFi settings say I’m still connected to the bridge.
@db7829
2 ай бұрын
That's odd. If you use a direct ethernet cable connection (no WiFi bridge), does it work? My WiFi bridge setup in this video continues to work flawlessly.
@maximaguy2002
21 күн бұрын
The final IP address is wrong in the video. Go to your settings menu on the printer > about machine> and at the bottom of the screen is your printers IP address. To connect to your printer, go to the network you just set up in the interface, open a new window and type in your machines IP address and you should be able to access the unit and print.