Пікірлер

• 
  @nasaorion1Күн бұрын

  I need to purchase a service manual for a 955 12/23 row is there anyway I could get information on this

• 
  @DylanLogger7 күн бұрын

  Hey, What percentage or ratio did you use when you seeded your field? 50/50? Thanks!

• 
  @tedkahler97387 күн бұрын

  15 pound alfalfa 60-75 pounds oats. Separate boxes on drill

• 
  @DylanLogger6 күн бұрын

  @@tedkahler9738 That quite interesting. Local farmers around my are usually do 40% alfalfa but we all do it differently. I was reading a lot of articles that actually suggest clear seeding alfalfa right from the start as it can yield a thicker and most consistent crop but it's dependent on a few factors, erosion being number 1. I'm contemplating on that and wouldn't be opposed to trying straight 100% alfalfa and see what happens. I tried it on smaller 40x40 and was pretty happy with the results.

• 
  @tedkahler97386 күн бұрын

  @@DylanLogger I have done both biggest thing if you do it with a cover crop hay it off early so the cover doesn’t compete too much

• 
  @DylanLogger6 күн бұрын

  @@tedkahler9738 About 2-3 weeks thru you'd say?

• 
  @tedkahler97386 күн бұрын

  @@DylanLogger say cut before companion crop heads. Or if alfalfa shows stress from being dry

• 
  @MartyWhillock9 күн бұрын

  My bailer won't go back to home

• 
  @tedkahler97389 күн бұрын

  Good chance actuator is bad

• 
  @zasanafesenov811910 күн бұрын

  Hello, how are you keeping the spray tank agitated? With a separate pump , or does the handler keep recirculating?

• 
  @tedkahler973810 күн бұрын

  The sprayer itself has seperate pump but this handler uses a 2 or 3 inch pump to move water around

• 
  @zasanafesenov81199 күн бұрын

  @@tedkahler9738 I'm ignorant in theses processes, please confirm that the handlers 2" pump is agitating the sprayer volume of liquid or the sprayer itself is using its own recirculating pump to agitate chemical mix?

• 
  @tedkahler97389 күн бұрын

  @@zasanafesenov8119 sprayer pump is agitating

• 
  @dantecrenshaw4115Ай бұрын

  Hello, I have a br7090 new holland baler and when the wrap gets low, it will start wrapping the bales and will not stop.

• 
  @tedkahler9738Ай бұрын

  Would guess either brake is too loose or the little wheel that counts the wrap is binding up on something causing it to not touch the roll any longer

• 
  @briandavis1578Ай бұрын

  Hello, I'm having a issue with my case baler. ( your monitor is the same as mine) in manual mode the it won't retract. No clue. Any help appreciated.

• 
  @piotrgrabowski81223 ай бұрын

  Hello. What do you apply to oat hay during harvest? I am from Poland and I am very interested in the issue of oat hay. How long does it take from mowing to harvesting? At what humidity do you harvest hay. Great production, great farm.

• 
  @troyremmers62234 ай бұрын

  Ted what happened to you

• 
  @tedkahler97384 ай бұрын

  I’m still alive Lol

• 
  @troyremmers62234 ай бұрын

  Ru going to make more videos

• 
  @OnePieceTractor5 ай бұрын

  I'm sure he'll let you take a sample if you agree to pay for the hay test

• 
  @rileychristian13007 ай бұрын

  What variety is this and where did you find it? I'm going to put some haygrazer out next spring to see how it does for hay. Do you have any tips for this stuff?

• 
  @farmergage67737 ай бұрын

  I would be afraid that my camera would get baled.

• 
  @user-fy1ll6nl4h7 ай бұрын

  Did you ever make a follow up to show the improvements you worked out with Blattner? I know this is an old post, maybe I missed it??

• 
  @tedkahler97387 ай бұрын

  Blattner made a custom length panel that I used and it has been fantastic. Any other questions?

• 
  @kevinroberts1757 ай бұрын

  If Im understanding correctly, you changed the length of the swinging panel where the double tapers to single. Did you shorten it so it swings back to center sooner? Really great video and like how your cows work through so easy. Thanks for sharing.

• 
  @tedkahler97387 ай бұрын

  @@kevinroberts175 I lengthened the last panels on each side since I’m not using the palp cage since my chute has one built in. The original ones were too short so get a cow or big calf to stop behind the first no back

• 
  @tedkahler97387 ай бұрын

  Well maybe I should say in front of last no back

• 
  @JacksonRhodes428 ай бұрын

  Jesus, Ted, the bales just keep on going! Magnificent work.

• 
  @darrelschulte62149 ай бұрын

  I need one of those ‼️

• 
  @farmergage67739 ай бұрын

  Who has the chopper ???

• 
  @cowwhisperer89279 ай бұрын

  2:20 lol

• 
  @johnwoitena29249 ай бұрын

  gotta br780a. knives are broke and knife assembly needs to come out due to rusted bolts breaking on the knives. any advise to pull the assembly out so i can retap the bolt holes and put new knives. thanks

• 
  @richhalsall4889 ай бұрын

  Little late seeing this video, but hopefully you can provide some insight. We have the RB 564, so a red new Holland. It ran great until we changed the netwrap. Now it’ll make the bale but won’t engage or Pick up the netwrap.

• 
  @okok-gg5fl9 ай бұрын

  Why not offset rake and avoid driving over the windrow.

• 
  @zacharyward494210 ай бұрын

  worked on a registerd belted galloway cow calf operation for almost 5 years. never had my arse kicked and beat so much by an animal. BATSHIT CRAZY

• 
  @MyJLV10 ай бұрын

  Is hay grazer good for horses?

• 
  @tedkahler973810 ай бұрын

  I believe it’s not recommended for horses

• 
  @mattthomas5610 ай бұрын

  Ted I have question on br 7090 why would the net wrap stop working when there is 1.25 inch of net left on spool I have to re thread the net every time any ideas thanks

• 
  @tedkahler973810 ай бұрын

  Very possible the counter or the roller that measure the net going on is hung up and not touching the roll. Also possible the brake tention is week and not cutting good as the larger roller has more tention on brake

• 
  @grocerbear970010 ай бұрын

  thanks for sharing. would appreciate any input on the heartiness of this product. any cracks yet?

• 
  @tedkahler973810 ай бұрын

  Still have the same mower can use pretty hard only minor stuff wrong with it

• 
  @rodneywroten299410 ай бұрын

  IT looks almost magical machine leving a beautiful ground with a windrow in the middle. Man it is tall

• 
  @seththomsen250211 ай бұрын

  I have the same mixer, will be my 3rd winter with it coming up. Love it.

• 
  @farmergage677311 ай бұрын

  This looks like the big swimming pool you showed me when I came over to work calves.

• 
  @MarkButler-qs7ul11 ай бұрын

  My br 740A net will auto extend and wrap but won't auto retract. I have to manually retract every bale

• 
  @tedkahler973811 ай бұрын

  Good chance the sensor needs callebrated. Check out book for instructions

• 
  @sheilamclaughlin96311 ай бұрын

  Should have removed the duals

• 
  @tedkahler973811 ай бұрын

  No I shouldn’t habe

• 
  @farmergage677311 ай бұрын

  this must have been drought '17

• 
  @uhohspagettioh9753111 ай бұрын

  Nice square windows, has the twinstar been trouble free? We are looking for a new rake, you think the extra $ is worth it vs a wheel rake?

• 
  @uhohspagettioh9753111 ай бұрын

  Glad to see you making videos again great content!

• 
  @spaceace1006 Жыл бұрын

  I've heard that Holstein Bulls don't produce the best quality beef. Plz correct me if I'm mistaken. Looks to me that Holstein Cows are overwhelmingly the majority of Dairy Cows. I've never seen any pics of huge industrial farms keeping..like Jerseys!

• 
  @blakebreckenridge Жыл бұрын

  I really like how these front net systems operate. I just bought a BV4580 Kubota and its a very similar setup. Works great.

• 
  @Thomasfarmstn Жыл бұрын

  I had that happen to 2 rows when I had my 1200. Called the dealership out because I couldn’t figure it out. They said the 2 rows were planting and I needed new seed tube sensors. Finally I figured it out the next day.

• 
  @erikmartin3238 Жыл бұрын

  Have you ever figured out cost per bale? And how much inoculant per bale?

• 
  @SeanC_ Жыл бұрын

  Hi Ted. I have a cropcutter 644. When the bale is full it catches the net and starts wrapping. Then an error sounds on the box and the net keeps going. It does not retract the actuator itself. You can manually retract it on the control box and guess when there is enough wrap applied and retract fully and it cuts properly. I have replaced the sensor on the wrap roller. Any idea what to look at next? TIA

• 
  @tedkahler9738 Жыл бұрын

  Have you tried to calibrate the actuator

• 
  @jerrylansbury9558 Жыл бұрын

  Thats my question why do so many farmers cut back and forth rather then around a field ???? Much faster cutting around then turning around each time. Maybe for chopping I could understand...but other wise........no reason !

• 
  @tedkahler9738 Жыл бұрын

  It’s faster and more efficient back and forth…..

• 
  @jerrylansbury9558 Жыл бұрын

  @@tedkahler9738 No possible way it can be faster....theres no stopping when going around the field !

• 
  @tedkahler9738 Жыл бұрын

  @@jerrylansbury9558 but the circle get small at the end… you can’t cut corner nicely in square pattern. Can’t take around said corner well or even ball around said corner. If you want Starr a timer for every operation in hay field…. I have it’s more efficient on 1/2 mile loving rows to cut cal and forth

• 
  @e.a.bfarms Жыл бұрын

  Hey Ted's Back! How's planting progress?

• 
  @tedkahler9738 Жыл бұрын

  its nearing completion

• 
  @brandonbewvlogs Жыл бұрын

  We have that same kind of Baylor but we're having problems with the hay getting stuck up in it before even goes into the machine itself!?

• 
  @tedkahler9738 Жыл бұрын

  teeth being weak can cause issues

• 
  @troyremmers6223 Жыл бұрын

  Good to see you again

• 
  @tedkahler9738 Жыл бұрын

  thanks

• 
  @4440chevy Жыл бұрын

  Ever since I got a cornhead with knife rolls on it my cornstalks don't cause any more random little things on the planter like that! Ive been in your shoes with chains knocked off, sensors unplugged, air lines ripped off lol

• 
  @tedkahler9738 Жыл бұрын

  we have a head that chews them up pretty good but some of the custom stuff i do i just have to shake my head

• 
  @farmergage6773 Жыл бұрын

  Boy the craziest things can happen. I hope some time in the next few days I can Get some cane planted.

• 
  @tedkahler9738 Жыл бұрын

  hope your able to

• 
  @byerboys2607 Жыл бұрын

  Corn stalks can and will do the most messed up unimaginable things to trucks tractors planters bailers things you would bet the farm against it doing but never ever count out a corn stalk like rocky in the 12th round type stuff 😊lol😂

• 
  @tedkahler9738 Жыл бұрын

  yea that is for sure

• 
  @dustinadams9136 Жыл бұрын

  Hope you guys keep getting some timely rains now!

• 
  @tedkahler9738 Жыл бұрын

  oo man that would be a blessing....has been kinda rough for a few years

• 
  @dustinadams9136 Жыл бұрын

  @@tedkahler9738 and yet as farmers we just push forward lol. Looking forward to more videos Ted!

• 
  @farmergage6773 Жыл бұрын

  Do like not having markers on the planter or would you rather have them on ??

• 
  @tedkahler9738 Жыл бұрын

  OOOOO i guess id rather not have them just more hoses to blow and cause issues.... i had them on my last 16 row but blew a hose when folding them up and smashed my hopper and caused a load if problems..... also seems on bigger planters they end up getting bent or broke anyhow

• 
  @jimsullivan9710 Жыл бұрын

  Hope the need for repairs slowed down.

• 
  @tedkahler9738 Жыл бұрын

  yes i sure hope they do too!!!

• 
  @w056007568 Жыл бұрын

  Good to see you again Ted. What do you do for weed control in this crop? regards Dan

• 
  @tedkahler9738 Жыл бұрын

  hey thanks!!! we will use roundup and an aditional broad leave chemical. off brand name is called fancy i cant remember the brand name. THen when the corn gets about knee high it will be hit with a handfull of pre emergent chem and be done going over it for the year then!

• 
  @sampsonsfarm6636 Жыл бұрын

  Nice to see you are video again man I hope to do one this weekend

• 
  @tedkahler9738 Жыл бұрын

  Thanks man. Ill be waiting!!!!

• 
  @jimsullivan9710 Жыл бұрын

  That a long day. Worth it though to see kid’s awards

• 
  @tedkahler9738 Жыл бұрын

  ooo yes it was

• 
  @farmergage6773 Жыл бұрын

  wow 130 acers per hour if a guy wanted to you could spray 1500 acers + in one day !!

• 
  @tedkahler9738 Жыл бұрын

  with reloading and such the average for the day isnt near that high .... maybe 1000 if im on good fields but seems i always run into some snags

• 
  @farmergage6773 Жыл бұрын

  @@tedkahler9738 yeah I suppose