Пікірлер

• 
  @The_Great_White17 сағат бұрын

  Say if you took the carry handle off and did a lpvo or scope would that work with the front sight? Or is that preference?

• 
  @404tactical713 сағат бұрын

  @The_Great_White thanks for the question. You can add an LPVO just need to use the correct mount height for that optic. There is no interference. I purchased a Viper PST Gen ll 1-6 for the AR15A4 as the replacement for the carry handle. Then I did a clone mod for this rifle for an M16A4 and changed it out for an ACOG.

• 
  @ezekialrodriguez17363 күн бұрын

  How did you put on the grip

• 
  @404tactical73 күн бұрын

  Hello? Thanks for the question. Do you mean the fore grip or the hand grip?

• 
  @duranbailiff53374 күн бұрын

  No worries, brother, we Boomers carried musket length bullet-launchers and appreciate them. Extra short barrels remind me of the klowns that roll their windows down at red lights and vape out clouds of smoke. What a waste of expensive powder/power! 😝

• 
  @404tactical74 күн бұрын

  @duranbailiff5337 Thanks for the feedback. The full-length rifles are more fun to shoot IMO than the stubbier and shorter rifles, although they can lack that "tacti-cool" look of the shorter rifle.

• 
  @ch3zburg4r4 күн бұрын

  Should have used a delta ring tool.

• 
  @404tactical74 күн бұрын

  I have spare black paint to correct the mark and I do use a Wheeler delta ring tool. The marks are from a hook being used to slide in the RAS. I appreciate you and the feedback. Thanks-Doug.

• 
  @JohnDoe5-jy4nt5 күн бұрын

  20” barrel and M855a1

• 
  @404tactical75 күн бұрын

  @@JohnDoe5-jy4nt I didn't think the 855A1 round was in service 20 years ago. Thanks for the feedback.

• 
  @Timpala445 күн бұрын

  How has the reliability been with the M70?

• 
  @404tactical75 күн бұрын

  @Timpala44 No issues with the rifle. Shoots all 762 ammo -brass, steel, corrosive-whatever I put through it. The only issue was a failure to eject a round one time when I was using a Bulgarian magazine. I dont use that mag anymore. Zastava M70 is reliable and nice quality

• 
  @HkMp5Guy7 күн бұрын

  I have the exact same colt set up pretty much the same way and I wouldn’t take anything for it. Absolutely love it

• 
  @404tactical76 күн бұрын

  @HkMp5Guy thanks for the comments. I love that rifle, and it gets more range time than the other rifles. I'm glad to hear you have one as well. Thanks-Doug

• 
  @jvan65827 күн бұрын

  Gorgeous

• 
  @404tactical76 күн бұрын

  @jvan6582 thank you for the feedback. I appreciate you.👍👍

• 
  @MadChristoph7 күн бұрын

  It looks just like an M16

• 
  @404tactical77 күн бұрын

  Thanks for your comments. I appreciate you. I love the M-16 rifle. Lightweight rifle, 20"-barrel, higher bullet velocities and accuracy and less felt recoil. What's not to love about the platform. The AR15A4 commercial rifle shares a lot of qualities (not just appearance) of the military M16A4.🤟🤟

• 
  @jamescarter41758 күн бұрын

  Nice rifle!

• 
  @404tactical78 күн бұрын

  @jamescarter4175 Thanks for the feedback. I appreciate you .✌️✌️

• 
  @jamescarter41757 күн бұрын

  @@404tactical7 You're welcome.

• 
  @celmer68 күн бұрын

  I really enjoy my M-16A4 clone on the target range and it performs great. But when I go hunting my M-16E1 clone is a lot more practical and comfortable. I've been Deer hunting with the AR-15 since 1990 and it always performs great with M193 screaming out of a 20" barrel. This fall I will be deer hunting with my GAU-5/A/A version of the XM-177E2 with 11½" barrel with pinned and welded 4½" flash hider and M193 or 50gr Ballistic Tips. We will see how it goes.

• 
  @404tactical78 күн бұрын

  Thanks for sharing your feedback. Good to hear your getting more use out of your rifles than just target duties. Good luck hunting down those deer this fall.✌✌

• 
  @404tactical79 күн бұрын

  Added a link to the Colt AR15A4 video in the description

• 
  @memirandawong10 күн бұрын

  I just took this beast home yesterday!!!!! She's an absolute beauty! Got mine from Wilde Built Tactical in San Diego. Good people.

• 
  @404tactical710 күн бұрын

  Pretty awesome. Enjoy your new "BEAST" rifle! Appreciate your comments. Thanks.

• 
  @albertborgman85910 күн бұрын

  It moved into the 308 category with weight increase. The pencil barrel was much maligned at the time of going from 308 to 233. Soldiers would lay them on the jeep seats and sit across them in later contempt. But could not overcome mountains of 556. Thus the 6.8 SPC, 6.5 Grendel, 6mm, and Valkyrie are options especially in semi automatic. The 3D printers a younger option. The AR-10 in Creed or every popular now.

• 
  @404tactical710 күн бұрын

  @albertborgman859- I appreciate your knowledge and your comments. Thanks-Doug

• 
  @GraizenBrann10 күн бұрын

  Good vid, Folks tell me "why do you have so much stuff on your rifle" but foregrips help for standing unsupported shots and My ACOG with Bi-Pod is definitely a cheat code in the wild where there are No convenient support bags and no barricades to shoot off of, just bi-poding where ever you can and sending accurate stable shots. 🤌

• 
  @404tactical710 күн бұрын

  Yep, you got it. Don't see many people shooting at 100+ yards without a rest, bag, bipod or something. Attaching the bipod to the handguards definitely enhances accuracy at all distances. Appreciate your comments and feedback. Thanks -Doug

• 
  @joshottinger638012 күн бұрын

  Why'd you reverse your camera?

• 
  @404tactical711 күн бұрын

  @joshottinger6380- weird- when I made the short directly off KZread app flipping the video was not an available option during or after. Generally, it will automatically flip for you after pressing stop if you have those settings on your device. Thanks for the feedback. I believe this is the only KZread Shorts I have done where this occurred.😳

• 
  @404tactical712 күн бұрын

  Having this Trijicon ACOG RCO is like having a cheat code. So easy to get tight groups at 100 yards. Looking for a range where I can extend out a bit more

• 
  @404tactical712 күн бұрын

  There is a link in the description of the YT video for the M5 RAS manufactured for the M16A4 by P & S Products

• 
  @DutchK7513 күн бұрын

  Seen M16A5's with some POG's the other day.

• 
  @404tactical713 күн бұрын

  @DutchK75-that is interesting. I did some research on the M16A5 concept guns this Spring. According to what was published in Military Defense magazine, they never entered service with the Marines, and they went to the M4 carbine instead at the last minute. There are tons of photos and some possible BS on reddit about that rifle, but from what I have seen published, these are just a 20" barrel uppers with an M4 type collapsible stock. I was thinking I saw one on guns.com or Sportsman warehouse a while back advertised as an M16A5 but stating semi-automatic. Appreciate the feedback and comments. Thanks

• 
  @DutchK7513 күн бұрын

  @@404tactical7 I really wish I could find the video. It was actually a tiktok. Talking about what they were going to shoot on the KD course. Most had M4 collapsible stocks. But I seen one with a Vltor Clubfoot. Made me think they were A5's.

• 
  @404tactical713 күн бұрын

  @DutchK75 I remember reading something about VLTOR along with the word concept. I'll check back on that. The rifle I saw on guns.com was an M5 not M16A5-Duh. I was able to find it. If you have a tik tok vid shoot a link. Thanks ✌️✌️

• 
  @superfamilyallosauridae650513 күн бұрын

  Let me clear this up. There are no M16A5s in service, and I say that not because there aren't collapsing stock M16A4s. I say that because M16A5 was a real program before 2012, and it had several companies create guns for it. It did not go far, but the H6 buffer kit was developed (carbine buffer for an M16A4 upper). These buffer kits entered service in 2012, about 1,200 for the entire military. Around 2020, USMC started using these specifically in boot camp due to female recruits and the ability to adjust stock length for different heights and eye relief. This is particularly important for training new shooters with good fundamentals. I went to boot in January 2021. For drill, I was issued a regular FN M16A4. Then, right before Grass Week, we swapped rifles and I got FN M16A4 10617695, which had an ACOG, black vickers sling, H6 buffer, carbine buffer tube, and carbine stock. I kept this rifle for the rest of boot and learned to shoot with it. I absolutely love collapsing stock M16A4s. To be clear, these rifles are all normal M16A4s that had the rifle tube taken off and a regular carbine tube put on, and then an H6 buffer (6 tungsten weights) used. Around 8,000 of these kits are currently in service, the majority in USMC. Roughly 7,000 were purchased 2021-present, with the previous decade only seeing 1,200 purchased all in 2012. I got this data by looking up the NSN and seeing charts for its demand and contracts for it. There are ZERO VLTOR A5 tubes on USMC M16A4s. Every collapsing stock A4 you see has a regular M4 tube and an H6 buffer. Sometimes H6 buffers show up on gunbroker. I purchased two for $90.

• 
  @superfamilyallosauridae650513 күн бұрын

  Furthermore, before they became the standard boot camp rifle of USMC in 2021-present, they were used in significant numbers by USMC tankers before the Abrams were given to the Army.

• 
  @abelincoln844614 күн бұрын

  The mag pouches on our rifles ensured that no matter what we were doing, we always had extra ammo with our rifle if something happened. Remember, when we were deploying to little COPs or patrol bases out in the middle of nowhere, you had to do all the daily life things there on these tiny bases, like workout, go take a poop, go shower, do laundry, etc and still be faced with the possibility of taking contact at any moment. If you're going to take a poop in a slit trench on the edge of your COP all you're gonna take from your hooch is the shower shoes on your feet, a roll of shit tickets, and your weapon. If shit pops off while you're pinching one off, you wanna be able to fight with what you've got on your rifle without having to grab anything else. Same concept applies to keeping a tourniquet on your weapon. Yeah, you've got extra mags and a bleeder kit on your vest, but you aren't always wearing or within arms reach of your vest. But you damn well better always be within arms reach of your weapon.

• 
  @404tactical713 күн бұрын

  abelincoln8446- Thank you for that great summary. Appreciate that added info on day-to-day stuff that occurs every day with our front-line soldiers that us civilians would never have to relate to. It all is clear now. I had searched forums and articles on that magazine pouch for months but only found a few pictures and mentions of it but nothing on designed use. Thanks for the details and I appreciate your feedback.

• 
  @404tactical78 күн бұрын

  My black Specter Gear mag pouch arrived by courier today from Specter Gear. Only have a few more additions for this mod to wrap it up. Appreciate everyone's support, comments and feedback!

• 
  @IndependentArmz15 күн бұрын

  That's not a typical A2 flash hider

• 
  @404tactical710 күн бұрын

  I'll check the length, but it may be extended to get to 16" in length with the barrel.

• 
  @404tactical715 күн бұрын

  The M5 Rail Adapter System was manufactured by Knights Armament, but during the Iraq and Afghanistan Wars P & S was licensed to produce these for the U.S. Government to supplement availability for production.

• 
  @southern84215 күн бұрын

  Here's the info I sent out to 110 sass in regards to the colt A4 I had with kac markings. Figured this story was fitting for this build type. when the A4s started getting the kAC rails colt was sending rifles to kac that didn't have any markings on them above the trigger pins that manufacturers put on them. KAC put Titusville fl on that area before final shipment. My m16a4 I was issued in 2003 had those markings. Fast forward 10 yrs I could never figure out why that was. I was in the hospital with a Marine and we always talked weapons. One time we were discussing Colt vs FN m16/ m4 rifles and he stated he had a KAC m16a4. I mentioned mine having a colt roll mark but stating Titusville, FL above the trigger pins. We stayed in touch for several years and would periodically get back on the subject of those rifles and we finally came across the information of how they got those markings and they were indeed Colt rifles with KAC markings. Supposedly colt was pushing out so many rifles for the GWOT at that time that some of the rifles weren't getting all or any markings other than serials. KAC would get those rifles for install of the handguards and a final inspection and would put their info where colt didn't.

• 
  @404tactical714 күн бұрын

  @southern842 That's good first-hand info on the subject. I have never heard of the markings on the rifles like that. Guess when they are pushing through rifles, there are a lot of hands contributing to keep up on quality and production. A side note I picked up a surplus Knight's Armament rail cover kit in a KA vinyl pouch a few months back at a military surplus store in Louisville for $14.95. All those rail covers just Knight's Armament and the foregrip has Titusville, FL, but I have seen some with Vero Beach, FL on them. Guess the markings on different components will identify the years for production and use. I appreciate your Service. Thanks-Doug

• 
  @southern84214 күн бұрын

  @404tactical7 Thanks. Definitely nice seeing the love for the old A4 rifles. Was a great weapon system for sure.

• 
  @404tactical714 күн бұрын

  @@southern842 appreciate your comments and sharing your experiences 👍👍

• 
  @Ps90man197916 күн бұрын

  Its magazine not clip. 🐝 Zafe out there lol

• 
  @404tactical715 күн бұрын

  Ewwww! Tomato tahmahto. Appreciate the feedback✌️✌️

• 
  @michaelbarfield52816 күн бұрын

  Nicely done!

• 
  @404tactical716 күн бұрын

  @@michaelbarfield528 I appreciate your feedback. That's the rifle that gets to go to the range the most. Thanks-Doug

• 
  @dougrobison855916 күн бұрын

  PEW PEW PEW!

• 
  @404tactical713 күн бұрын

  @@dougrobison8559 BAM BAM

• 
  @southern84216 күн бұрын

  "Clip" comments on the way lol.

• 
  @404tactical716 күн бұрын

  @southern842 Hope I don't get "clipped". Bawahaaaa🤟🤟. Thanks for the feedback! I appreciate you.

• 
  @southern84216 күн бұрын

  @@404tactical7 haha 😆.

• 
  @BigTee309916 күн бұрын

  Sir, i own (2) Colt hbars. One flat top and one carry handle. All the hype these days about LWRC , Daniel Defense, etc. Colt started it all! I used it in USMC and will bet my life on it always!

• 
  @joshuawing476622 күн бұрын

  Thought the video was paused at first

• 
  @404tactical722 күн бұрын

  Whoa. Thanks for the feedback. Using a different software for creating content. Need to get into the manual again for editing. I appreciate you

• 
  @404tactical724 күн бұрын

  Apologies for the WiCkEdLy bad audio😬

• 
  @mcb275729 күн бұрын

  In my opinion this is the AR15 gold standard. At least for real fighting weapons.

• 
  @404tactical725 күн бұрын

  I appreciate your feedback. Thanks-Doug

• 
  @user-fo6cm9ku9i29 күн бұрын

  I have keyhole with C on upper receiver and one keyhole mark on lower receiver next to to the trigger its M4A1 full Auto series W kindly tell me which year its built?

• 
  @404tactical729 күн бұрын

  The forging marks will only tell you the forging house that produced it. Cerro Forge = Keyhole. Other widely produced receivers have the Square or A. There are many other forging houses with various letters or symbols. The serial number is the way to identify the year that receiver /rifle was produced. If full auto, it was later variation and an upgrade from 3 round burst variant.

• 
  @RickyJohnson-nt1kmАй бұрын

  No.marki is on front site means it's Comercial nothing bad there lots or just 40000 thousands different from.millspec

• 
  @RickyJohnson-nt1kmАй бұрын

  Colt 6920le best in world true tcp.mitlary spc as for some colts they gitball.majers parts lk cr colts range beater my windom weaponry bests colts finish fit ww mades a quality guns not no.busjmaster by Remington did quality when shit old school bushmaster were gtg

• 
  @404tactical7Ай бұрын

  Thanks for the comment✌️✌️

• 
  @AjkllAaАй бұрын

  Extremely Remarkable Courage weaponry * * each time all of us enter major battle's 😢

• 
  @antoniocruz5596Ай бұрын

  Your carry handle is too far back.

• 
  @404tactical7Ай бұрын

  It sure was, and thanks for the feedback. The photo was taken a while before the video was taken, but I did not notice it. I had changed out the carry handle for a couple of different holographic sites, and I did not even notice it. It was prooerly fitted a hile back. Appreciate you and thanks. Doug

• 
  @VladprydeАй бұрын

  So this, or the Springfield SA-16. That's where I'm at. I like the fixed carry handle of the Springfield, but I like the authenticity of the Colt name too. Sigh.

• 
  @404tactical7Ай бұрын

  Springfield makes good rifles. Base your decision based off of how you are going to use the rifle. I use an optic 99% of the time. A fixed carry handle gives limited options. The Colt AR15A4 allows a lot more versatility with the pic rail. I have an H&R retro M16 and I don't use it a lot at the range. Good luck with your decision!. Doug

• 
  @sammako1899Ай бұрын

  Is that an m16 bolt? It looks like one.

• 
  @404tactical7Ай бұрын

  Yes. It comes with the M16 bolt carrier group. That part isn't advertised in any of the descriptions. I just bought another Colt M16 BCG from Charlie's Custom Clones. It is identical, including the markings. Thoroughbred Armament has them for pretty low prices when they are in stock. Appreciate your comments. Doug.

• 
  @sammako1899Ай бұрын

  @@404tactical7 Thanks, that answers a couple of other questions I had about the upper receiver.

• 
  @404tactical7Ай бұрын

  @sammako1899 This upper has M4 markings at the front of the pic rail as an FYI

• 
  @longwhiteline3308Ай бұрын

  Also those collectors FNs are mighty tempting but I just can't justify that price.

• 
  @404tactical7Ай бұрын

  I could not justify it, either. Thanks-Doug

• 
  @RickyJohnson-nt1kmАй бұрын

  It's not colt mitlary true spc tcp.lk.a real.6920.le tcp it's fn civilian made called the military build clone only fn build mitlary is lk a true colt tcp.fn paids rolls to colt for Sam to.wim.bit then it's no colt 6920le

• 
  @longwhiteline3308Ай бұрын

  The only thing I don't like is the fat handguards. I have an original Colt A2 with the skinny grips and it looks and feels great in the hands. Although if I do pickup on of these I am probably going to get a KAC rail for it.

• 
  @404tactical7Ай бұрын

  Thanks for the feedback. I put an M5 RAS from P&S products on mine and dropped a Trijicon ACOG on top.

• 
  @longwhiteline3308Ай бұрын

  @404tactical7 very nice! That is what I am hoping to do. I grew up on Irons with even ARs as a kid, so having glass will be very different for me. The only glass I ever had was a Vortex Strikefire 2 on an FAL. Actually worked great believe it or nit lol. Wish I would have never sold that rifle. Was the first rifle I ever bought with my own money when I turned 21.

• 
  @KPad87Ай бұрын

  I’m saving up for one . Very nice rifle .

• 
  @404tactical7Ай бұрын

  Appreciate the feedback. Good luck getting your new rifle. Thanks-Doug

• 
  @G.W-01Ай бұрын

  I put the vg6 epsilon on my m70 its definitely a excellent break, and is a pretty decent flash hider as well.

• 
  @404tactical7Ай бұрын

  Good to hear. Appreciate your comments and feedback-thanks!. Doug

• 
  @AuthorizedDealerАй бұрын

  13629 is not Colt. It’s the outsourced one. I’m not saying it’s bad.

• 
  @cyeleeopticsАй бұрын

  Hi! We love your channel! Would you like to review our products?

• 
  @mitchelll899Ай бұрын

  They won't fit in a century arms VSKA

• 
  @404tactical7Ай бұрын

  Appreciate your comments and feedback-Thanks. Doug

• 
  @Tac2cool55616 күн бұрын

  Because that gun is shit

• 
  @404tactical715 күн бұрын

  @Tac2cool556 N o issues with mine other than that magazine. Appreciate your feedback. What's your go to AK platform rifle? WASR, Arsenal or ?👍👍

• 
  @treos17Ай бұрын

  my ocd is poppin! put the carry handle on correct lol

• 
  @404tactical7Ай бұрын

  Thanks. Good Eye. I did that before the video was published. It had been on and off like 30 times testing optics and placement. Currently have a Trijicon TA31RCO ACOG on the rail. Appreciate the feedback-Doug.

• 
  @romanleon76Ай бұрын

  And the music by Richard Wagner 😂😂😂😂😂

• 
  @404tactical7Ай бұрын

  Wagner -Ride of the Valkyries🤟🤟

• 
  @a55ga5mАй бұрын

  What extended changing handle/knobis that Zastava?

• 
  @404tactical7Ай бұрын

  Texas Weapon Systems Hob Knob charging handle. It stayed on for 400 rounds. It actually came off while charging the rifle during the video. I was looking for a Zenitco charging handle and the TWS seemed like a good fit. I like it. Appreciate the comments-Doug.

• 
  @SolidcamboАй бұрын

  I have 6.3 30 round mags withe metal reinforced. And 3 40 round mags they all work flawless

• 
  @404tactical7Ай бұрын

  Thanks for the comments. Who makes the 40-round mag? I want to get a few. Appreciate you.-Doug

• 
  @SolidcamboАй бұрын

  @@404tactical7 Bulgarian. I get them all my mags from gun mag warehouse. They are around 10 dollars a piece

• 
  @SolidcamboАй бұрын

  The 30 round mags are Bulgarian too

• 
  @404tactical7Ай бұрын

  @@Solidcambo thanks

• 
  @CheJoffre2 ай бұрын

  You've probably already seen his shop, but OshGoshKalash puts out some great designs for T-Shirts, etc. Check him out.

• 
  @michaelphipps48352 ай бұрын

  Buying polymer??…… invest in a dremel… especially if you like buying a lot of different kinds….. 2 seconds hitting the front and back lugs where you see the obvious wear will work wonders.👍

• 
  @404tactical72 ай бұрын

  Good info and thanks for the feedback. I did use a Dremel on the bottom of the front tab and the rear lug. Been working fine since that was done. Thanks-Doug