Пікірлер

• 
  @pekinglad9 күн бұрын

  I would rather keep it as one piece, I never want to sew two pieces together, NO, NO, NO !

• 
  @kimberlyanndesigns15 күн бұрын

  The only reason I cut anything off of these jeans was because there was so much excess after bringing the pants up to the correct length. After a while, you might be able to notice the bulk and unless it is secured, you could trip if wearing heels. Believe me, it happened to me. I nearly fell down a flight of stairs when the heel of my shoe got caught in the “excess material” left on the pants.

• 
  @tranquilmentor12 күн бұрын

  Thanks so much for a great video! I like how you explained everything and all the steps. The pacing was just right for me to follow along! I hate hemming jeans, but this method is going to be much better! It's a game changer for sure!

• 
  @kimberlyanndesigns112 күн бұрын

  You can do it! Thank you for the kind words.

• 
  @tranquilmentor12 күн бұрын

  @@kimberlyanndesigns1 My jeans came out awesome! No more paying for alterations on my jeans! Thanks again for your help!😀

• 
  @gladysprentice963714 күн бұрын

  Love it! Thank you

• 
  @citlallimiranda907115 күн бұрын

  Is there a Max high the utensils must not exceed?

• 
  @kimberlyanndesigns115 күн бұрын

  You might have to check on the Cricut website. I know Dollar tree spatulas were perfect. The “harder” the metal, the harder it is to engrave

• 
  @madibuggy15 күн бұрын

  ❤

• 
  @kimberlyanndesigns115 күн бұрын

  Aww you’re so sweet. Thank you

• 
  @mariebydesign528918 күн бұрын

  hi Kimberly thanks so much for your video really enjoyed it, I found the information in the video to be very helpful as I have just finally got myself a Cricut Maker3 and I got myself the quick swap tool with the Engraving tip and my Knife Blade, so your video really helped me, Once I have got my Machine out of the box. Have you tried the engraving Tip on Basswood was wondering if the engraving tip works on wood, will try this for myself, just got to buy some Basswood, I think I have some Metal Blanks in my crafty stash.

• 
  @kimberlyanndesigns116 күн бұрын

  You’re gonna love your Cricut! I’ve used the engraving tip on Dollar Tree spatulas. I also used it on metal guitar picks. I haven’t done basswood. I’m sure it will work well. Just make sure you use a mm that will work with the machine. If it’s too thick, it can’t go under the rollers. 😊

• 
  @edeez197523 күн бұрын

  My tip always clogs

• 
  @kimberlyanndesigns123 күн бұрын

  Always keep it tip side down.

• 
  @kimberlyanndesigns123 күн бұрын

  If I’m not using it for a while, I take it out and cover it with

• 
  @edeez197523 күн бұрын

  @@kimberlyanndesigns1 i usually do but I didn’t use it for a bit so it clogged meaning a month or two lol

• 
  @edeez197523 күн бұрын

  @@kimberlyanndesigns1 had the tip on it For some reason it’s been the only one to ever do it

• 
  @edeez197523 күн бұрын

  I’m am going to try This no saw another review I love it

• 
  @kimberlyanndesigns116 күн бұрын

  It really helps with my hands for sure. Thanks for watching.

• 
  @user-ci6kx5bv6q23 күн бұрын

  Would be great if the music weren’t playing in the back. Ugh

• 
  @moonhaven7466Ай бұрын

  Such a pity you play music over your talking :( It was very difficult to hear what you were saying.

• 
  @kimberlyanndesigns1Ай бұрын

  I had trouble with that. I tried to add a new voiceover and had trouble adding it. I apologize. it’s my only video that I had trouble with.

• 
  @jondaneal6741Ай бұрын

  Thank you so much for doing this! It was so easy! Ans my son thinks I’m a genius! This video was so helpful

• 
  @kimberlyanndesigns1Ай бұрын

  Well that’s a great compliment. Way to go Mom.

• 
  @lauriemillar9230Ай бұрын

  OMG….love how you used your cricut heat press! 😂

• 
  @kimberlyanndesigns1Ай бұрын

  Just like using an iron!! lol. Thanks for watching.

• 
  @cynthiabeneke1042Ай бұрын

  Clever girl! looks good. Cynthia South Africa

• 
  @kimberlyanndesigns1Ай бұрын

  Thank you. Gotta be creative sometimes to save money. Thank you for watching.

• 
  @GiftbasketgmaАй бұрын

  How do we know when Michael’s makes up Grab boxes after each holiday. I usually miss them

• 
  @kimberlyanndesigns1Ай бұрын

  Unfortunately we really don’t. I think They come out about 3 times a year. It’s well after clearance prices for a season. I’m not even sure the employees know either. I end up stalking the store although, I go there a lot anyway. 🤣

• 
  @cocasio7190Ай бұрын

  Thanks

• 
  @kimberlyanndesigns1Ай бұрын

  You’re welcome

• 
  @kennanoelle650Ай бұрын

  I love your video! I can’t wait to decorate my sons!

• 
  @kimberlyanndesigns1Ай бұрын

  Thank you for watching. It was fun to make.

• 
  @erictamslamans3496Ай бұрын

  Great tour of your home-you are a genius at organizing small spaces! Thanks for the many tips! You should be linking products that you can get some credit for :)

• 
  @kimberlyanndesigns1Ай бұрын

  Great idea!! Thanks for watching.

• 
  @karinakhan73072 ай бұрын

  Which blade did you use? I need to buy engraving blade.

• 
  @kimberlyanndesigns12 ай бұрын

  Its blade number 41. Cricut.com has it on sale this week for $13.99.

• 
  @Grumpy_Crumpet2 ай бұрын

  So many great ideas here! I especially love the use of lazy Susans in different areas. Thank you for sharing. Though the rooms you presented don’t appear small at all to me, I appreciate this may be down to how well-organised they are with respect to lifestyle.

• 
  @kimberlyanndesigns12 ай бұрын

  Thank you for watching. We downsized a few years ago and my old house had a lot of storage space. Linen closets, bathroom closets, large bedroom closets, etc…it does take some getting used to…and planning. The love lazy Susan’s! I even use them in my craft room. 😊

• 
  @lauracooper36282 ай бұрын

  Sooo cute! ❤

• 
  @heatherkirton15332 ай бұрын

  Thank you, worked like a charm

• 
  @kimberlyanndesigns12 ай бұрын

  Great to hear!

• 
  @SabbirAhmed-dq6sm2 ай бұрын

  The best finishing i have watched so far..But I love my pants very much so dont fell confident.. I cut the original hem and just fold and sew again..cant compromise the finishing..

• 
  @kimberlyanndesigns12 ай бұрын

  I understand. It can be scary.

• 
  @winterchyna74812 ай бұрын

  Hello, what are your settings?

• 
  @kimberlyanndesigns12 ай бұрын

  honestly I don’t remember. I always need to test out settings on scrap material first.

• 
  @ruia55743 ай бұрын

  Can I ask you what your markers are organized in?

• 
  @kimberlyanndesigns12 ай бұрын

  I have a wooden box that I put small buckets in. They look like little paint buckets. I think I found them at Goodwill.

• 
  @ruia55743 ай бұрын

  Loved watching this!!! Thank you

• 
  @kimberlyanndesigns13 ай бұрын

  Thank you. I appreciate it.

• 
  @hichamlteif25873 ай бұрын

  What kind of paint u r using to stick on epoxy

• 
  @kimberlyanndesigns13 ай бұрын

  I used craft acrylic paint colors.

• 
  @hichamlteif25873 ай бұрын

  What about water and washing the floor what will happen the paint may be melted and diffused. I have one small broken piece on porcelain tile and need to color it with glazing effect what do u suggest. Color is white similar to carara matble

• 
  @kimberlyanndesigns13 ай бұрын

  A tile sealer works well to protect the repair. If a feathering or other technique is needed, I would first practice on a paper plate or a spare piece of tile, if you are lucky enough to have one. Try using different things like a sea sponge or small artist brushes to get the desired effect. A fan brush or other flat brush might work great to get down into cracks. Add color to your white if needed. Gray or blue may work well. Then I would use a tile sealer after it has thoroughly dried. Hope this helps.

• 
  @BarbaraF-xk3sf3 ай бұрын

  So everyone gets a bag of pine ones for Christmas and maybe a roll of ribbon!😂

• 
  @deanasharp47753 ай бұрын

  Flowers from pinecone?

• 
  @kimberlyanndesigns13 ай бұрын

  ? Make flowers out of pinecones?

• 
  @fairydhust3 ай бұрын

  Best set up of like items together to keep your carft room organized. Very impressive. Thank you for sharing. Happy Creating. You've created a wonderful space for yourself.

• 
  @kimberlyanndesigns13 ай бұрын

  Thank you. It has to be organized or I can’t function. Thank you for watching.

• 
  @stitcher47293 ай бұрын

  You got good boxes. Good assortment.

• 
  @user-dp3vq7se1u3 ай бұрын

  What paint would I use if I wanted to do it in black. Is there any preparation for the pedestal sink besides cleaning it. Also after painting black could I put a little gold leaf down the bottom part

• 
  @kimberlyanndesigns13 ай бұрын

  I would clean it well and maybe sand it a bit. It might rough up the porcelain a bit. I used chalk paint. It’s very forgiving and works great with about anything. Oh wow, I just thought of this! Look into Rustoleum paints. They make so many variations now. They aren’t just spray paints anymore. After painting you can definitely do gold leaf over it. You will also want to seal everything after you’re finished. It will make it less likely to scratch. You have to show it to me when you’re done! Email photos! Good luck. I’m sure it will turn out awesome. [email protected].

• 
  @kimcarpenter85283 ай бұрын

  Beautiful!!!!❤

• 
  @kimberlyanndesigns13 ай бұрын

  Thank you very much. 😊

• 
  @tiffanygemmer-DIYdesign3 ай бұрын

  Way to personalize your space and tackle that job yourself! Such sweet pictures of you and your hubby, too! 😊

• 
  @kimberlyanndesigns13 ай бұрын

  Thanks so much! 😊

• 
  @deannajohnson26294 ай бұрын

  I have a ton of ribbon though, so id have to buy like 100 of these racks lol 😂

• 
  @kimberlyanndesigns14 ай бұрын

  Yikes! It would be your ribbon warehouse. LOL. Thank you for watching. 😊

• 
  @tonicstudios4 ай бұрын

  Love the review :) Thanks for making the video and happy you enjoy it!

• 
  @kimberlyanndesigns13 ай бұрын

  Thank you for watching. 😊

• 
  @dlcook874 ай бұрын

  Very cool! You definitely have a knack! It really looks beautiful!

• 
  @kimberlyanndesigns14 ай бұрын

  Thanks a bunch!

• 
  @erictamslamans34964 ай бұрын

  Wow I’m impressed you did that all yourself! It’s a great idea to elevate a room.

• 
  @kimberlyanndesigns14 ай бұрын

  Thank you.

• 
  @bjlivigni46874 ай бұрын

  HOPE some one will respond. I will shorten a liquid knit pair of slacks. I know how to stitch around the original hem. My issue is this is stretch fabric, I will have AN EXCESS of fabric to cut off. How to keep it from flipping down.

• 
  @kimberlyanndesigns14 ай бұрын

  Hello. Thank you for the question. What would you think about using the fabric fuse to hold the fabric in place?

• 
  @bjlivigni46874 ай бұрын

  GOOD IDEA THANKS

• 
  @bjlivigni46874 ай бұрын

  GOOD IDEA THANKS @@kimberlyanndesigns1

• 
  @bevcarter15544 ай бұрын

  Love that mirror framing idea - going to do it myself!!

• 
  @erictamslamans34964 ай бұрын

  Cute creative ideas! The mirror frame 🤯 genius! Tying back the curtain is so elegant and simple. Great tips Kim 👍🏻

• 
  @lauracooper36284 ай бұрын

  Awesome ❤️

• 
  @ClaudetteMiss4 ай бұрын

  I'm not a sewer and frankly I had my doubts about the final look. But the results blew me away! The hem truly does look perfectly original. Thank you so much for sharing. Your easy instructions made me think even I could accomplish this.

• 
  @kimberlyanndesigns14 ай бұрын

  That’s awesome. I’m so glad you were able to make your pants look great!

• 
  @user-hw2qv6et8i5 ай бұрын

  This is a great video. This is the best one I have watched, because you show and explain as you go......Thanks, I now feel like I can do this sewing tip successfully.

• 
  @kimberlyanndesigns15 ай бұрын

  Awesome thank you. Watch my other video where you leave the hem on the entire time. kzread.info/dash/bejne/i4Cpy9NqiNvdlso.html. You might like this video as well. 😉

• 
  @sharyncoy67975 ай бұрын

  Love your craft room Kim. I need to organize mine again. Don’t have a big room, sure do miss my basement up north. Told my hubby we could make the garage my craft room lol. I don’t think he fell for it🤣

• 
  @kimberlyanndesigns15 ай бұрын

  Great idea! Lol. Thank you for the kind words.

• 
  @mowerssaturdaysundayfleama48486 ай бұрын

  Thanks for keeping it simple!

• 
  @kimberlyanndesigns16 ай бұрын

  You bet! Thank you for watching

• 
  @betheubank31216 ай бұрын

  What kind of tape do you use?

• 
  @kimberlyanndesigns15 ай бұрын

  I find painters tape works the best.

• 
  @terratufts56596 ай бұрын

  I’m so glad to have run across this gem! I really enjoyed the “learn with me, we’ll make mistakes together “ tutorial ❤ Such a breath of fresh air and your willingness to be vulnerable helped me feel comfortable and confident enough to try this myself, unlike the “done this a thousand times so it’s a breeze for me but good luck to you” tutorials that leave me feeling okay about trying it then stumbling and going into freak out mode because they made it look effortless. Thank you for a wonderful tutorial ❤

• 
  @kimberlyanndesigns16 ай бұрын

  I’m so happy you enjoyed the video. I try to show the good, the bad and the ugly sometimes! That was my first attempt at engraving as well. 😀. Thank you for watching.

• 
  @nancydepiano35996 ай бұрын

  Excellent video!!!

• 
  @nancydepiano35996 ай бұрын

  Excellent video! Thank you❤

• 
  @kimberlyanndesigns16 ай бұрын

  @nancydepiano3599 Thank you very much for the kind words.

• 
  @magranny134046 ай бұрын

  Great video! Where did you get that neat little drawer divider for your tips inside your machine? Thanks.

• 
  @kimberlyanndesigns16 ай бұрын

  Cool little item, isn’t it? I found mine a few years ago. here is something similar to it on Amazon. Tool Organizer for Cricut Maker 3 & Maker, Cricut Blade Storage Accessories and Supplies for Cutting Blades, Cricut Machine Organization and Storage Tools, Knife and Blade Organizer (Blade Mod) a.co/d/4FPEaeq Thank you for watching.

• 
  @zanyanochipa6 ай бұрын

  Now , I feel better 😂😂😂. I thought I have to much stuff.

• 
  @kimberlyanndesigns16 ай бұрын

  LOL. That’s hilarious. Thanks for watching. 🤣

• 
  @Chrissy_Mad-Scots-Wench6 ай бұрын

  Thank You so much for this. I've just got a Cricut Maker 3. Can I safely engrave Sterling Silver Dog Tags following your directions? Hugs from Scotland, UK ❤❤

• 
  @kimberlyanndesigns16 ай бұрын

  Yes. I would try using the aluminum setting with “more” pressure. I would definitely practice first. Also, don’t be afraid to go over it twice. When the “cut” is finished and it wants you to remove your cutting mat, DON’T remove it. Hit the PLAY “GO” button again and it will go back over it again. Thank you for watching. Let me know how it turns out.

• 
  @Chrissy_Mad-Scots-Wench6 ай бұрын

  @@kimberlyanndesigns1 Thank You. I will, Hun