Пікірлер

• 
  @davidmartinez9130Күн бұрын

  .308 ammo? Thats not a 30-06

• 
  @MidwesternFC20 сағат бұрын

  Correct. Its chambered in 7.62 NATO and a whole lot of fun. Thanks for watching.

• 
  @MichaelBlueMusic2 күн бұрын

  Dude, I love everything about this!! The gun, the ammo, all of it! If you’re ever in the Peoria area, we should meet up! 👍

• 
  @MidwesternFC20 сағат бұрын

  Thank you! It is SO MUCH FUN. Thanks for the offer. Its been a while since I've been that way but would be fun to go back sometime soon. All the best to you!

• 
  @DempseyUnga2 күн бұрын

  I use to run a REM 1187P for LEO duties. I experienced similar failure, rubber O-ring in the gas system failed during a training cycle with my unit. This was my primary long gun for several years until this failure had me questioning the reliability under heavy use. I switched to AR platform for many years and recently purchased a beretta 1301 tactical. After watching this vid, I hope history does t repeat itself!

• 
  @MidwesternFC2 күн бұрын

  I hope the 1301 is good to you. I will say this: I was shooting complete garbage through there for testing and it never failed once. I didint notice the o-ring broke until I cleaned it so although it did break, it kept right on running which I like :-) Thanks for the comment and keep me posted after testing it out.

• 
  @pedrotome91193 күн бұрын

  Hello, sir and everybody. I am a Portuguesecitizen, and I have been in our army in 1985/6. Some decades before we had this and other Mauser rifles, as well as Mannlichers, etc. The National Republic Guard still uses Mausers on parades. We took them to our ex colonial war which took place in Angola, Mozambique, and Guinea, since 1961 until 1975. We had Lugers too. Most of them from D.W.M. and again, Mauser. All our firearms of the XXth Century were good guns. This is a typical Portuguese contract: the crest, the leather sling, the markings, everything is quite normal. Our State prefer to sell them to other countries, instead of selling our historical guns here. They also got good reasons for it. 1000 Thanks for the video, Sir!!

• 
  @MidwesternFC2 күн бұрын

  Hello there. Thank you for confirmation and the great comment. Its a unique Mauser design and I'm happy and fortunate to have it in the collection. Great weapon and glad we have the opportunity to own and appreciate them. All the best to you.

• 
  @pedrotome91192 күн бұрын

  ​@@MidwesternFC1000 thanks for your kind awser to my humble yet sincere comment. In case you need some info, about Portugal, just drop me a line or two, please!! Best regards!!

• 
  @MidwesternFC20 сағат бұрын

  @@pedrotome9119 This is a great offer, thank you! I wonder if there are any military records on these available. Thanks so much for the kind words and wishing you all the best!

• 
  @centurian3184 күн бұрын

  Never touch the front handgard, it gets hot real quick on the Garand.

• 
  @tylerdoestech4 күн бұрын

  It's too bad these parts kits are now gone!

• 
  @MidwesternFC2 күн бұрын

  I didn't even notice. Glad I got 2! At least JRA is selling some of these. Theirs have more PB parts also which is nice. Thanks for watching.

• 
  @WheelgunsOnWheels5 күн бұрын

  Nice piece. I too have one of these passed down to me from my great uncle. It’s equipped with his original purchase receipt and transfer document dated November of 1927. Adjustable rear sight and essentially in mint condition. He purchased it new from the factory and it was shipped via train to his home in Jersey city. Looks like he shot it a few times literally a few times back in the 20’s then it rested in its original box passed on through several other family members in its box in a chest untouched for 90+ years until I eventually received it. He was a construction guy and his claim to fame was his work in the shiny arches atop the Chrysler building in NYC. I was very fond of uncle Philly during my early childhood and he took me into the city to show off his various construction jobs in old NYC. He drove motorcycles and did stunts at horse tracks before the races and was truly a gem to us as a grand story teller. He did so many things and traveled to so many places it was hard to discern fact from fiction, but anytime we looked into any of his tales we found the receipts of validity. This revolver is no exception to his life and tales of the olden days.

• 
  @MidwesternFC4 күн бұрын

  That is the best. To have a piece from a family member with all the paperwork, doesn't get much better than that! I love how these can keep us in touch, or at least thinking about, individuals who have passed on. A great way to connect with the past and those we care for.

• 
  @WheelgunsOnWheels4 күн бұрын

  @@MidwesternFCexactly. And one day my great nephew or grandson will have treasures of my past which includes as many tales of adventure and comes with much more fancy revolvers. Thanks for sharing your acquisition with the community.

• 
  @MidwesternFC2 күн бұрын

  @@WheelgunsOnWheels Thats what its all about. Thanks again for the nice comment. Its good to be reminded that these types of collectors are out there. Hopefully your nephew and/or grandson will appreciate the same. All the best to you.

• 
  @tanguito00076 күн бұрын

  I have an original BM59e, which Beretta made on an M1, with the selector, semi and fullauto, the tri-compensator, makes it extremely controllable in automatic fire. and in semi, it is very precise, without recoil. greetings from Argentina

• 
  @MidwesternFC4 күн бұрын

  That is awesome. Thanks for the comment and best wishes to you down there!

• 
  @tanguito00074 күн бұрын

  @@MidwesternFC ,I would like to buy a 20-round magazine, but US companies do not ship to Argentina, and on eBay, I cannot find any seller. and here they don't exist. greetings

• 
  @sherlock18956 күн бұрын

  Fun piece. I have a Sharps.

• 
  @MidwesternFC4 күн бұрын

  It sure is. Hope to get a Sharps someday. I should re-do this video with some updated information. Take care.

• 
  @miroslavm25537 күн бұрын

  I just don’t understand why this first 1301 version everybody is calling Model 2? This video is 2 years old, but Model 2 was first time introduced to American market on the Shot Show in Los Vegas early this year.

• 
  @MidwesternFC7 күн бұрын

  Its because at the time this was the 'Gen 2' version of the original 1301 after Beretta did some upgrades including; Gen 2 added an aluminium top rail instead of plastic, a shroud around the bolt release and threaded chokes. Mod. 2 is the new version out recently.

• 
  @JoanJarvis-wr4li9 күн бұрын

  I use neodymium magnets behind the cloth.

• 
  @MidwesternFC9 күн бұрын

  I bet that looks great without the hooks. Thanks for sharing.

• 
  @christhesmith11 күн бұрын

  You made this rifle happy!

• 
  @MidwesternFC9 күн бұрын

  Thank you. Its so nice to hear that. All the best.

• 
  @johnwilson566212 күн бұрын

  That's is awesome thanks for the vid and how to clean a sks keep up the great videos

• 
  @MidwesternFC9 күн бұрын

  Of course! I'm glad you found some parts helpful. It wasn't very dirty so pretty simple but check out my Chinese SKS video if you want to see more cosmoline! Take care.

• 
  @Tk-62612 күн бұрын

  The kolibri

• 
  @danielperez96815 күн бұрын

  "El ingenio Remignton" 550-1

• 
  @hk93shooter16 күн бұрын

  for collector or tackle box. cool

• 
  @MidwesternFC16 күн бұрын

  Exactly!

• 
  @fabiomigliorini200417 күн бұрын

  Bat the ITALIAN BM 59 precision is Disastrous ...Improve the precision until 300 Yard...

• 
  @fabiomigliorini200417 күн бұрын

  Must Improve the precision until 300 Yard...The original BM 59 is Catastrofic at 150 Yard...

• 
  @camdenhilscher577017 күн бұрын

  Dawg if you shoot anything less than lab 22 LR you a shooting hopes and dreams that they suddenly drop dead 😂

• 
  @MidwesternFC16 күн бұрын

  I can assure you it is not my go-to for home defense 😅

• 
  @KJVSolomon18 күн бұрын

  If that's 22lr then that would be a good self defense testicle popper

• 
  @MRN95618 күн бұрын

  Hi to all, I wanted to know if you had had any problems with the cylinder ports clogging up how do you clean them ive tried compressed air to clean but do you guys have any tip or tricks please advise. And dose it really need the o ring to function properly? Thanks in advance

• 
  @MidwesternFC18 күн бұрын

  I had to dig my ports out with a brass pick. It took a while. It was packed in there. I know mine kept running while it was broken that’s for sure! Good luck.

• 
  @thefrenchgunsmith648819 күн бұрын

  Very clever design ! Making bayonet usefull haha

• 
  @MidwesternFC16 күн бұрын

  Very true. Its really cool. Almost perfect condition.

• 
  @The_Casual_Collector20 күн бұрын

  Great job and love this video series...dang...now Im going to have to get one...😂

• 
  @MidwesternFC19 күн бұрын

  Thanks for the comments and th ekind words. I cannot stress how fun it is :-)

• 
  @dandahermitseals558220 күн бұрын

  I really appreciate your explination on cleaning. Super tips. I'v never got one in cosmoline to clean. The tip bout usung the sun and a bag to sweat out more cosmo is gold. Thums up and subbed. Any advise on fireing pin solutions as relates to the slamfire issue?? Thanks Dandahermit

• 
  @MidwesternFC20 күн бұрын

  Thanks for the comment and I'm glad it was helpful...this is why I do this. As for the firing pin and slam fires its very simple: disassemble the bolt (a simple process) and remove any dirt, gunk or cosmoline and you're all set. No need for any special firing pin springs or anything else. Just clean it. Thanks for the sub and take care!

• 
  @user-mp5yg3zy2b25 күн бұрын

  Disemuah daerah di Indonesia tolong di adakan, karena satu untuk mengurangi perang Gliriya antar negara tetangga Indonesia.

• 
  @kibishifumei176225 күн бұрын

  12.95$ is crazzzyyy 😮

• 
  @MidwesternFC23 күн бұрын

  This was in the mid-late 1050's. A high price back then.

• 
  @Steve-it4en25 күн бұрын

  I've seen these in great condition but never the box in like new condition . Is it .22 short or something smaller.

• 
  @EarlyMourning____25 күн бұрын

  “I’ll tell you what brother. You walk away from one of these, you deserve everything you took from my house”

• 
  @dianaalfieri1825 күн бұрын

  1st sks i set up to shoot was a norinco pinned barrel. So it shoots Hungarian white box into a honest1/2 " at 50yds maby 65 yds on a good eye day, good enough ,costed 85$ out the door.

• 
  @MidwesternFC23 күн бұрын

  Those were the days. Sounds like a keeper to me. Thanks for watching!

• 
  @hughthomson456225 күн бұрын

  Thanks!

• 
  @MidwesternFC25 күн бұрын

  Wow, thank you so much! All the best.

• 
  @hughthomson456225 күн бұрын

  Thanks!

• 
  @RickSanchez-sx5zj25 күн бұрын

  I bet the atf considers this a wepon of mass destruction😂

• 
  @RetroBitTech25 күн бұрын

  I want one

• 
  @BrentSweetland25 күн бұрын

  12.95 😮😀

• 
  @reverendlowdown398225 күн бұрын

  Makes u wish time machines were a thing huh? Lol

• 
  @MidwesternFC23 күн бұрын

  Mid 1950s pricing.

• 
  @jefferyleo7625 күн бұрын

  This is in fact California compliant.

• 
  @MidwesternFC23 күн бұрын

  I'll get it on the roster, lol.

• 
  @SauceForYourEars16 күн бұрын

  NOT FOR LONG

• 
  @jefferyleo7615 күн бұрын

  @@SauceForYourEars your probably right.

• 
  @stanherrada309812 күн бұрын

  It doesn't have a loaded chamber indicator. It wouldn't be legal.

• 
  @jefferyleo7612 күн бұрын

  @@stanherrada3098 good god. How’d I not notice that.

• 
  @Dubsack25 күн бұрын

  Watching you have that thing pointed at your palm hurt my soul. Idk how else youd load it though lol

• 
  @Jvargier025 күн бұрын

  The only time I saw the barrel point it him was briefly while the gun was open and you could see through it that there was no cartridge in it

• 
  @Dubsack25 күн бұрын

  @@Jvargier0 immediately after he inserts the round into the barrel and closes it

• 
  @harrisp58425 күн бұрын

  @@Jvargier0 he held the entire end of the barrel after he loaded it. If it were to discharge accidentally he would’ve at least lost a chunk of his hand. And I’d argue any chunk of my hand needs to stay put!

• 
  @MidwesternFC25 күн бұрын

  Its true, I could have been more careful. Its single action though so cannot be fired without having the hammer back.

• 
  @Jvargier024 күн бұрын

  How is a bullet going to magically go off in his palm when there is nothing to strike the primer? Y’all acting like you know guns but if you’d ever used one you’d know how they work.

• 
  @johncarey317825 күн бұрын

  Seen smaller.

• 
  @frosty89x4525 күн бұрын

  A smaller toy/cap gun or a smaller one that shoots cartridges?

• 
  @maddawgnoll25 күн бұрын

  NEF make that mini revolver but I dunno if it's actually smaller than this, but maybe a bit shorter. I'm more shocked at seeing a price tag at 12.95

• 
  @MidwesternFC23 күн бұрын

  @@maddawgnoll Gotta love those 1950's prices.

• 
  @bigtrev76126 күн бұрын

  🇦🇺😎👍If I lived in the US I would be an avid collector of the SKS… Beautiful rifles with such a rich history

• 
  @bigtrev76126 күн бұрын

  🇦🇺😎👍Perhaps the gun is someone’s personal gun and not out of the create where it would have been covered in cosmoline ?

• 
  @bigtrev76126 күн бұрын

  🇦🇺😎👍I’d love to own an SKS but like most things down here they’re illegal

• 
  @theoriginalOSOK26 күн бұрын

  I have one similar to that but it's not a Victory model. Mine was made in 1947 best as I can tell. Prefix "S" serial number. Mine doesn't have that hole under the cylinder release... 5" and "made in USA" stamp on the side and the roll mark on the barrel - chambered in 38 Special Ctg. That is very cool!

• 
  @rogerherron594827 күн бұрын

  I purchased one rifle from them back some years ago, and was very, very disappointed with the rifle when I received it. A 1903A1 USMC sniper clone. Fit and finish were totally unacceptable. I lost over $300.00 to get shed of it, but they finally agreed to take it back. I never had mixed luck like the guy below because once burned, forever learned.

• 
  @trudysteel3511Ай бұрын

  Fun little rifle right there. Looks like I need to catch up on some videos.

• 
  @trudysteel3511Ай бұрын

  My Grandfather had one. Never shot it. I think it went to my uncle. Beautiful gun.

• 
  @KODIDesignsАй бұрын

  Interesting loading style looks like fun!!!! Nice music did you write it?

• 
  @MidwesternFCАй бұрын

  Its so much fun! I did not write the music BUT its been great having other options. I'm working on an intro song now though!

• 
  @chapopoti11Ай бұрын

  Hi do I need to register one of these rifles in California with no serial numbers

• 
  @MidwesternFCАй бұрын

  Hi there. I'm not an expert on Cali laws but if you have to register a single shot .22LR then this would qualify. I would hope none of these pre-GCA items have to be defaced with new SN but who knows. Stay strong out there and thanks for watching.

• 
  @JimwombatLandАй бұрын

  Serial number tells yu a lot about the receicer , barrel date too, marks on the small parts too.

• 
  @MidwesternFCАй бұрын

  They sure do. This has turned into my favorite M1 after some parts switching. Thanks for watching.

• 
  @josephliptakАй бұрын

  Looks like a model 1903 S&W .32 long

• 
  @MidwesternFCАй бұрын

  Thanks for the input. She's a fun little shooter and Ive since picked up another in nickel which is pretty rough but still fun. Thanks for watching!

• 
  @FayazAhmad-yl6spАй бұрын

  My son has Chinese SKS with attached bayonet.

• 
  @MidwesternFCАй бұрын

  They sure are fun. Thanks for watching and take care.

• 
  @jeffdavis1178Ай бұрын

  What a fun gun!! Very cool

• 
  @MidwesternFCАй бұрын

  Its so much fun. Its a great indoor shooter too. Had to test it out up north. So sweet.