Пікірлер

• 
  @godfellas483Ай бұрын

  thanks...Why are you wearing gloves??? Latex fetish...? lol!😎

• 
  @michaelpence682 ай бұрын

  What size Allen key for stem bolts to adjust the angle on handlebars thanks

• 
  @BMXNEWSCHANNELАй бұрын

  Generally, most bmx products use an allen head bolt that takes a 6mm allen key.

• 
  @humansnotai49122 ай бұрын

  Just spray some hairspray into the grip. It'll slide on and stick like shit to a blanket when it dries.

• 
  @leavemealoneyouprick2 ай бұрын

  thanks man, literally just wanted to know if the chain was directional haaha cheers

• 
  @butchwagaman35213 ай бұрын

  This way is so slow. Phu at EPIC bmx has a better way... just sayin...

• 
  @user-nv2oi2rr4s3 ай бұрын

  Less stripping with more splines.

• 
  @rtaylor11056 ай бұрын

  Those odyssey forks are also heat treated

• 
  @Face4radio7186 ай бұрын

  Great video!! Bought all the suggested stuff from Dans comp. Is spoke prep necessary? Watched a lot of these videos and don’t see anyone using it.

• 
  @BMXNEWSCHANNELАй бұрын

  We feel like spoke prep is optional when talking about the use of thread lock.

• 
  @tmbones10507 ай бұрын

  I like the 1-6 3 cross technique

• 
  @dave843467 ай бұрын

  I have a question why didnt you measure the spokes i was led to believe slightly longer spokes are fitted in the drive side of the wheel ,video was great by the way

• 
  @BMXNEWSCHANNELАй бұрын

  In this video we are using a hub that incorporates 2 flanges that are the same size. Some companies make hubs that have 2 different flange sizes and a specific center offset.. If you are unsure it is best to contact the hub's manufacturer to ask what their spoke requirements are..

• 
  @benstokes068 ай бұрын

  Legend

• 
  @jonnyastron18618 ай бұрын

  Finally a straight forward, talkin facts only. Thx dude

• 
  @nicoskie9 ай бұрын

  Can a half link chain work on narrow wide chainring?

• 
  @LANDOW09 ай бұрын

  ❤Thank you for the information

• 
  @LANDOW09 ай бұрын

  I'm cromoly

• 
  @hopenavajo139110 ай бұрын

  When building a wheel with spokes,does it have to be in the same or opposite direction on both sides,which one is it,but spokes stick out.

• 
  @hatehatekillhate10 ай бұрын

  I miss this channel

• 
  @davidjohnston110811 ай бұрын

  Really forget to mention things like am i supposed to tighten the nubs so far why did ur rim stay in shape and mine back out

• 
  @peteespinosa218611 ай бұрын

  This type of crank technology is not new, Profile has been producing the splined spindle since 1980 I do believe. Still the best design ever from a retired drag racer.

• 
  @NangaiEsther-nt4cb Жыл бұрын

  Good 👍👍👍 I have got you right

• 
  @kadeemeiland Жыл бұрын

  Absolutely terrible tutorial, literally the important parts are the parts you don't show properly

• 
  @allennickles3970 Жыл бұрын

  Cant thank you enough for making this video. Still helping folks six years later😂

• 
  @BMXNEWSCHANNEL11 ай бұрын

  We plan to help for even 6 more!!

• 
  @mountainflyhigh Жыл бұрын

  Umm, bullshit. Will slip as you put nothing on them to make them stick. In the heat, or when they get older, gonna slip like mad.

• 
  @eddiediggs Жыл бұрын

  Sick helpful asf

• 
  @thatracinggtbmx6453 Жыл бұрын

  Thank you dude ive been struggling badly with this but u and my bro explained it so damn well

• 
  @BMXNEWSCHANNEL11 ай бұрын

  Glad to help. Subscribe fore more coming soon!

• 
  @mrbuffchunky9459 Жыл бұрын

  And would this style work for a fly lunar x lace?

• 
  @BMXNEWSCHANNEL11 ай бұрын

  Kind of... As far as the pattern goes the lacing would be the same but the only difference is that "x lacing" or "Cross Lacing" requires the spokes on the flange to anchor to the opposite side of the rim... For Example (left flange spokes anchor to the right side of rim and right flange spokes anchor to the left side) (relative to how you are holding and looking at the wheel)

• 
  @mrbuffchunky9459 Жыл бұрын

  Hey, did you ever do the cross lace?

• 
  @BMXNEWSCHANNEL Жыл бұрын

  I am currently finishing the tutorial on “how to cross lace a 36 spoke wheel”. It should be uploaded by June of this year 2023

• 
  @mrbuffchunky9459 Жыл бұрын

  Awesome thank you.

• 
  @Waferdicing Жыл бұрын

  ♡⁠(⁠Ӧ⁠ｖ⁠Ӧ⁠｡⁠)

• 
  @cactus.jack.spncer Жыл бұрын

  Mine did nothing at all

• 
  @Ethan19Wayne Жыл бұрын

  Thank you.! 👍🇵🇭

• 
  @killthebuddha5034 Жыл бұрын

  Too tall.... and what...... no grease? way too much talking for a little 5-minute project

• 
  @OlExtraRegularBass Жыл бұрын

  This can't be the best video because the music is... intolerable.

• 
  @krishnaram9044 Жыл бұрын

  stranger crux is the best

• 
  @robertpresti7775 Жыл бұрын

  Been at this for hours! one side is great but some how otherside isn't. idk I give up.

• 
  @robertpresti7775 Жыл бұрын

  You lost me at step 3. Also it would be cool if you mentioned what side of the rim does the spoke go in? is it the same same as the flange or opposite?

• 
  @BMXNEWSCHANNEL11 ай бұрын

  The answer to your question is what determines the difference between traditional and "x/cross" lacing patterns.

• 
  @cecilhunnicutt7053 Жыл бұрын

  Did you ever get these trails finished?

• 
  @RNicolasRuvalcaba Жыл бұрын

  Do you have a video for lacing a 28 hole rim ?

• 
  @jay999tv Жыл бұрын

  Rip

• 
  @thebosschief2855 Жыл бұрын

  What is your frame?

• 
  @BMXNEWSCHANNEL Жыл бұрын

  2017 Verde Regent

• 
  @thebosschief2855 Жыл бұрын

  What a beautiful and durable frame bmx . What brand?

• 
  @GVNGLAND Жыл бұрын

  Saviour i got to run to a bike shop since someone stole my bike and i got my frame back but they left my premium cranks on but only one arm and the adapter is stuck thank you for making this video

• 
  @MokaBoucha Жыл бұрын

  Stupid question: do you need to know which side of the rim is the drive side before lacing? Or is that determined by the hub placement?

• 
  @BMXNEWSCHANNEL11 ай бұрын

  some rear wheels have 2 different flange sizes so the determining factor would be the length of spokes being different for both sides... (If the wheel requires such spoke selection)

• 
  @JoshyWashyy Жыл бұрын

  Lacing my wheel for my bmx dreeam build

• 
  @yeseniamacias662 Жыл бұрын

  the best video out in very specific

• 
  @bluefraa4523 Жыл бұрын

  " Hi tensil steel frame"...you mean " Hi Ten " steel ??

• 
  @mywaveinwoodswoodperfumes Жыл бұрын

  i,m planing to buy my first chromoly thanks for the video amazing

• 
  @MrKGHunter Жыл бұрын

  I grew up in that town, those cops are the lowest of the low. Speed trap town so they can make money. They also have a long history of harassment, beating people, raping women etc. A very high turnover. It’s pretty humorous considering that they’re all drunk when they’re off duty, complete wastes of life.

• 
  @aldwinjum7533 Жыл бұрын

  what if for a small rim 12 inch with 16 spokes 8x8 . what would be the distance ? like you started with 4 holes gap so what if on a 16spokes 8x8? and also can it be customize the rim to make it more spokes?

• 
  @Lucasbird47 Жыл бұрын

  My rim has 88 spokes is that normal?

• 
  @richardcoppedgejr6871 Жыл бұрын

  Simple technique, but some details need to be mentioned. Like, spoke lengths, any differences? Drive side vs. Non-drive side? Cross technique used? 2 vs. 3 cross? Great close up points of view .