Know what you mean, I was in a Bobcat when it was hit by an F150 pickup truck. Bobcat was flipped over but I only got bumped around. Have rebuilt many Bobcats, it's the most useful compact machine you can have! As for the generator start with the carb, gas dries out and clogs it up.

@BMXNEWSCHANNEL

7 жыл бұрын

+chargermopar That's wild. Good thing they have a cage and protected you. Thanks for the tips on the generator. I guess I will start with cleaning the carburetor & replacing rubber hoses. My father taught me a method of cleaning rust out of a gas tank. You remove it, shake metal screws in it to free all the lose particles and then rotate a petroleum safe coating on the inside.. Makes the gas tank like new again.

@chargermopar

7 жыл бұрын

Generally I use water mixed with washing soda in a metal gas tank, and electricity from a battery and charger to convert the rust and then agitate with BB's inside. I can then electroplate the inside of the tank or use a coating. The bast way I have found is to zinc plate the inside than install an insituform liner by heating the tank and inflating the coating. If I remember correctly the Bobcat 632 has a gasoline engine so you will have fuel issues in it too. Ever since my incident with the pickup truck I kind of fell in love with Bobcats and began collecting them. Really like the way they turn, you can get around just about anywhere.

@BMXNEWSCHANNEL

7 жыл бұрын

+chargermopar Ahh it's a gas bobcat :( Oh well.. Thanks for the tips. I will definitely look into it.. I just assumed the bobcat was diesel like most of them.

PTO = power take off. It's a tractor thing. What you have is an electric clutch that engages the mower deck, which is where your fault is likely located. Just follow the wires...

@BMXNEWSCHANNEL

7 жыл бұрын

+Luke Johnson Thanks you so much for that information. I knew what PTO stood for but that was about it. I will try to search up the pto system of that model of John Deer.

Great content you guys should have way more views

make shore you ask the excavating company for loads of clay

@BMXNEWSCHANNEL

7 жыл бұрын

+Alex Hedderick No. Clay is the worst substance to use in jumps. It doesn't stick to dirt and when it dries it cracks and falls apart.

@BMXNEWSCHANNEL

7 жыл бұрын

+Alex Hedderick I forgot to mention... The clay around here is horrible.. It's the really red clay that doesn't do much good. Only if we could find some good clay but it not abundant around here.

What are you guys using as your water source?

@BMXNEWSCHANNEL

7 жыл бұрын

+Heath Curtis There is a flowing creek on site.

@heathcurtis3164

7 жыл бұрын

The BNC (Bmx News Channel) nice mate on my old site we had to collect the rain then the council destroyed our jumps 😑

A wire

@BMXNEWSCHANNEL

7 жыл бұрын

+Carlstan Quammie That's what it was! I knew it was either a wire or the whole PTO clutch. Luckily it was only a wire.