Bearings are not always "blown" out. Replacing BB bearings can be a pain. Do everything possible to prevent the headache. Try greasing them.
Жүктеу.....
Пікірлер: 28
@ghoulmane6 жыл бұрын
My bearing balls started falling out through the seat stem
@Him111127 жыл бұрын
Thx dude my bottom bracket is not moving well even but now it should be good I'm gonna try it later on
@BMXNEWSCHANNEL
7 жыл бұрын
+BillLe It will save it! Mine is rolling like brand new again. Super dialed.
@dominiccox51507 жыл бұрын
Great video👍
@BMXNEWSCHANNEL
7 жыл бұрын
+Dominic Cox Thanks Dominic!
@garthstead31247 жыл бұрын
you ever be riding and your caleces start burning
@BMXNEWSCHANNEL
7 жыл бұрын
+Garth Stead Yep! It's a fairly common problem. My hands were all most to the point of bleeding last month and they burned so bad. What happens is you start to turn that callus into a blister. The way you hold/work handlebars is a similar to getting blisters with a hand tool. Give it a couple days and it will harden even more and start to peel. By then the burning is gone.
@illiteratethug33057 жыл бұрын
Didn't know you could get inside sealed bearings. Is this just for BB bearings, could you get into sealed bearings on wheel hubs/would you recommend it? Another great vid.
@BMXNEWSCHANNEL
7 жыл бұрын
+illiterate thug Yea you can use grease in every part, with bearings, to prolong the life of them. All sealed bearings can be serviced this way. The little orange cap on these bearings are what make them "sealed". It's just don't called a dust cap. You just pop the dust cap off and you can grease any sealed set up.
@yahavduer59413 жыл бұрын
did you greased only 1 bearing or both?
@davidcampbell12017 жыл бұрын
Do the dust caps literally just pop in
@BMXNEWSCHANNEL
7 жыл бұрын
+Bmx Skate Yea they just pop in. The seam is made really right so they don't come out very easy but they just pop back into place and you're done.
@Asshole1435 жыл бұрын
My bearing balls started falling out how to fix that
@jesusflores2170
5 жыл бұрын
2 steps 1 sell your bike 2 buy a new bike
@beyguccisam899
5 жыл бұрын
Buy new bearings off Ebay their cheap and good quality
@yungglock93497 жыл бұрын
what's up with the LED strip on the DT? :D
@BMXNEWSCHANNEL
7 жыл бұрын
+Fishpai~ It's for light at night! Works really well. Keeps cops from giving me tickets for no lights.
@dccracker79225 жыл бұрын
Gloves?
@cs_onewayy4 жыл бұрын
Why is my bike making a noise when I pedal
@joemasters2538
4 жыл бұрын
Grease your pedal bearings if that doesn't work then its your bb
Пікірлер: 28
My bearing balls started falling out through the seat stem
Thx dude my bottom bracket is not moving well even but now it should be good I'm gonna try it later on
@BMXNEWSCHANNEL
7 жыл бұрын
+BillLe It will save it! Mine is rolling like brand new again. Super dialed.
Great video👍
@BMXNEWSCHANNEL
7 жыл бұрын
+Dominic Cox Thanks Dominic!
you ever be riding and your caleces start burning
@BMXNEWSCHANNEL
7 жыл бұрын
+Garth Stead Yep! It's a fairly common problem. My hands were all most to the point of bleeding last month and they burned so bad. What happens is you start to turn that callus into a blister. The way you hold/work handlebars is a similar to getting blisters with a hand tool. Give it a couple days and it will harden even more and start to peel. By then the burning is gone.
Didn't know you could get inside sealed bearings. Is this just for BB bearings, could you get into sealed bearings on wheel hubs/would you recommend it? Another great vid.
@BMXNEWSCHANNEL
7 жыл бұрын
+illiterate thug Yea you can use grease in every part, with bearings, to prolong the life of them. All sealed bearings can be serviced this way. The little orange cap on these bearings are what make them "sealed". It's just don't called a dust cap. You just pop the dust cap off and you can grease any sealed set up.
did you greased only 1 bearing or both?
Do the dust caps literally just pop in
@BMXNEWSCHANNEL
7 жыл бұрын
+Bmx Skate Yea they just pop in. The seam is made really right so they don't come out very easy but they just pop back into place and you're done.
My bearing balls started falling out how to fix that
@jesusflores2170
5 жыл бұрын
2 steps 1 sell your bike 2 buy a new bike
@beyguccisam899
5 жыл бұрын
Buy new bearings off Ebay their cheap and good quality
what's up with the LED strip on the DT? :D
@BMXNEWSCHANNEL
7 жыл бұрын
+Fishpai~ It's for light at night! Works really well. Keeps cops from giving me tickets for no lights.
Gloves?
Why is my bike making a noise when I pedal
@joemasters2538
4 жыл бұрын
Grease your pedal bearings if that doesn't work then its your bb
Did you put peanut butter in the bearing Jk😂
Why do you have rubber gloves on?
@BMXNEWSCHANNEL
6 жыл бұрын
+Marc Barilla Because I have my hands in grease.
Get some gloves that actually fit you
@BMXNEWSCHANNEL
7 жыл бұрын
+CallumFilms Gloves do not matter.