I'm a 44 year old dad, and today I learned to fix my kids bike, thanks man, now if youcould fix my wife's mood swings that would be great, tha ks again man
@virusout8418
3 жыл бұрын
lol
@LittlBr-bf9lu
3 жыл бұрын
Thats like asking god to stop covid
@thatcherwelkermtb91395 жыл бұрын
Thank's for making this video! My cranks keep on going loose, and I just learned I need spacers inbetween my crank and bolts.
@laudi35547 жыл бұрын
Thanks it helped, I found out that both of my ball bearings where broken ...
@JamesMTBAdventures2 жыл бұрын
I'm used to fixing mountain bikes and if there is movement in the bottom bracket it normally needs to be replaced. My son's BMX bike bottom bracket had movement so watching this video let me know that it can be tightened up on a BMX and that's what I've done, as well as regrease the bearings. Thanks for the video.
@thelatvianstuff54097 жыл бұрын
Thanks! This video was really helpful!
@zackolsen84356 жыл бұрын
Thank you so much I've been stressing this for two months brand new bike
@tayr25076 жыл бұрын
This really helped me bro thank u man
@kevinmorales6254 жыл бұрын
Simple basic thanks for the info
@richardthornton776 жыл бұрын
Thanks worked a treat
@sylvester35267 жыл бұрын
thank you..helped me a lot!
@takeiteasy63462 жыл бұрын
Awesome video right to the point
@diregtshadow7576 Жыл бұрын
Super helpful thank you
@MrPlenty.5 жыл бұрын
Dude this guy is amazing
@jargzz33907 жыл бұрын
thanks that video actually helped
@jasperblunt20866 жыл бұрын
can you do a video on converting to a sealed bb on this frame?
@sikeypc27077 жыл бұрын
A video that actual helped!
@harvesterbmx
7 жыл бұрын
yup, i looked for one and couldnt find a bmx tutorial
@JohnPerales7 жыл бұрын
Nice showed thsi to my son so he can fix it and leave me alone LOL
@blazer019guinto27 жыл бұрын
thanks man.
@augustine31733 жыл бұрын
thanks, worked out great
@harvesterbmx
3 жыл бұрын
Great to hear!
@dannyvillegas52423 жыл бұрын
How do I fix crunchy cranks I’ve wiped them down and I add grease like 10 time already
@briancorey13783 жыл бұрын
Why didn't you clean it out and re grease everything while you were in there? Or even throw on some light strength locktite on the crankarm bolt? 🤔
@dereckc9469
2 жыл бұрын
because it all looked fine even the grease looked great. plus it takes like 5 minutes or less. now if you wanna beat yourself over the head do a timing belt on a mitsu 4g64 and NOT change out the crank position center while you're in there only to have the sensor fail 5 months later.
@alexandrew18142 жыл бұрын
hi can i ask a question what size is the crank bolt all of it
@kimmygaming55 жыл бұрын
What crank arms are those ?
@erickgonzalez68844 жыл бұрын
How do i fix my bike when i peddle and it pops
@christiang73983 жыл бұрын
dumb question? why add spacers?
@elo03267 жыл бұрын
can i convert to sealed bearings? my bmx crankset is exactly like thins one.
@harvesterbmx
7 жыл бұрын
you will need a new crankset and new bearings
@brianpineda66327 жыл бұрын
My cranks move from side to side a little bit will this strategy help to tight them
@YeetxBoi
6 жыл бұрын
Brian Pineda your bearings need replacing and everything needs to be properly tightened
@GAMINGMETJEOMA7 жыл бұрын
mine is keep coming loose
@jamesdunne79557 жыл бұрын
thx as i turns out ive broke my ball bearings
@OPB5084 жыл бұрын
Hey once I took off the spindle and the pinch my crank arm won’t come off, do you know why?
@MZRFaith
Жыл бұрын
Mine didn’t come off either lol, assuming ours is different
@OPB508
Жыл бұрын
@@MZRFaith fax old ass bike, I’m pretty sure it was a two piece or sum
@xijinpingsupremeleader52593 жыл бұрын
uhhhh my bmxes is like super lose like it goes back and forth sideways... lol
@DadeRich7204 жыл бұрын
My one piece keeps comin loose nomatter wat on a 98 Dyno nsx tha threads seem good too it suckz cause it spins off in less than 2 blocks
@DadeRich720
4 жыл бұрын
Tha medium blue locktite dosent fix tha issue either
Пікірлер: 42
I'm a 44 year old dad, and today I learned to fix my kids bike, thanks man, now if youcould fix my wife's mood swings that would be great, tha ks again man
@virusout8418
3 жыл бұрын
lol
@LittlBr-bf9lu
3 жыл бұрын
Thats like asking god to stop covid
Thank's for making this video! My cranks keep on going loose, and I just learned I need spacers inbetween my crank and bolts.
Thanks it helped, I found out that both of my ball bearings where broken ...
I'm used to fixing mountain bikes and if there is movement in the bottom bracket it normally needs to be replaced. My son's BMX bike bottom bracket had movement so watching this video let me know that it can be tightened up on a BMX and that's what I've done, as well as regrease the bearings. Thanks for the video.
Thanks! This video was really helpful!
Thank you so much I've been stressing this for two months brand new bike
This really helped me bro thank u man
Simple basic thanks for the info
Thanks worked a treat
thank you..helped me a lot!
Awesome video right to the point
Super helpful thank you
Dude this guy is amazing
thanks that video actually helped
can you do a video on converting to a sealed bb on this frame?
A video that actual helped!
@harvesterbmx
7 жыл бұрын
yup, i looked for one and couldnt find a bmx tutorial
Nice showed thsi to my son so he can fix it and leave me alone LOL
thanks man.
thanks, worked out great
@harvesterbmx
3 жыл бұрын
Great to hear!
How do I fix crunchy cranks I’ve wiped them down and I add grease like 10 time already
Why didn't you clean it out and re grease everything while you were in there? Or even throw on some light strength locktite on the crankarm bolt? 🤔
@dereckc9469
2 жыл бұрын
because it all looked fine even the grease looked great. plus it takes like 5 minutes or less. now if you wanna beat yourself over the head do a timing belt on a mitsu 4g64 and NOT change out the crank position center while you're in there only to have the sensor fail 5 months later.
hi can i ask a question what size is the crank bolt all of it
What crank arms are those ?
How do i fix my bike when i peddle and it pops
dumb question? why add spacers?
can i convert to sealed bearings? my bmx crankset is exactly like thins one.
@harvesterbmx
7 жыл бұрын
you will need a new crankset and new bearings
My cranks move from side to side a little bit will this strategy help to tight them
@YeetxBoi
6 жыл бұрын
Brian Pineda your bearings need replacing and everything needs to be properly tightened
mine is keep coming loose
thx as i turns out ive broke my ball bearings
Hey once I took off the spindle and the pinch my crank arm won’t come off, do you know why?
@MZRFaith
Жыл бұрын
Mine didn’t come off either lol, assuming ours is different
@OPB508
Жыл бұрын
@@MZRFaith fax old ass bike, I’m pretty sure it was a two piece or sum
uhhhh my bmxes is like super lose like it goes back and forth sideways... lol
My one piece keeps comin loose nomatter wat on a 98 Dyno nsx tha threads seem good too it suckz cause it spins off in less than 2 blocks
@DadeRich720
4 жыл бұрын
Tha medium blue locktite dosent fix tha issue either