Well done! You are an inspiration. I will check my old scales too and see if it can be fixed. I hate to throw things out without a stab at fixing it. Cheap Chinese junk manufacturing!
@MrPimperanto Жыл бұрын
Those are from a barn door…. 👍👍
@alanseager Жыл бұрын
can you convert duel action pneumatics to hydralics
@rebeccastone8732 Жыл бұрын
I wish you had links on here for your website and especially you other youtube channel. I can't find either.
@kadirklc7241 Жыл бұрын
While supplying the battery from outside to the bathroom scale, I connected the battery plus and minus terminals in reverse. Now it doesn't work at all. How can I fix it?
@kegjon Жыл бұрын
what kind of cord did you use?
@bitrage. Жыл бұрын
Hey, what would I need in order to be able to control force, so let's say it's some kind of actuator that can pull max force of 100lbs but if I set it half way then I can still pull the full range of actuator range but it would be 50 lbs, quarter setting 25lbs, ect.??? So like a shock absorber but with on the fly resistance control?
@rjs9006 Жыл бұрын
“Simple fix” The fix: *rocket science*
@sjlouvieify2 жыл бұрын
Hi, I I have a pneumatic can crusher. I'm just wondering, are you supposed to oil the cylinder as you would with a pneumatic tool? Or would that ruin the internal seals? I know this is an older video but thanks in advance for any help.
@Dziaba2 жыл бұрын
my slim-talking scale stop working ( few months of use ) blink Err and 0.00 back and for
@xxsilentmajicxx2 жыл бұрын
scales are deceiving.
@hkleehk13 жыл бұрын
After watching the video, I have my scale fixed, without soldering whatsover, or opening up. Just changed the battery, being inspired by the mentality of 3 Rs, recycle, reuse, reduce.
@Surferant6663 жыл бұрын
Hi. I have a 80 inch x 80 inch solar panel ontop of a sprinter van roof rack. Can you help me with what size actuator i would need to lift the panels from flat to 90 degrees. They are hinged atm like a trap door Thankyou
@muttukukadi3 жыл бұрын
How r u I like this can you call me I need some information you can call me any time. 732 309 4200 cell Albert jasani
@jimkok19574 жыл бұрын
The LCD screen's bottom half is faded. I put in new batteries but did not fix problem
@AztecWarrior694 жыл бұрын
I'm really not trying to be an asshole here, however why on earth would people pay for a little piece of metal, that can get lost, when there is literally a very simple knot that does this same thing?
@rebeccastone8732 Жыл бұрын
I was wondering the same thing...
@sohailalawadhi56264 жыл бұрын
Hi.. Thanks for your video.. Very informative.. Maybe I'm late and you don't post videos anymore but can you tell me if there are any dual small cylinders that can be used.. Like hand size cylinders and be thin as well.. Thanks again sir
@cathalbutler4 жыл бұрын
Hi, I wonder if you could help me, I'm trying to develop a weighing scales that has a built-in max and minimum alarm. The reason for this is I'm in the process of setting up a weight loss business and I don't want my patients to be able to see their weight. Ideally what I want is for them to stand on the weighing scales and if they go over a preset maximum weight, an alarm will go off and similarly if they go below a preset weight an alarm will go off....would appreciate any guidence on the matter.
@resultchan49024 жыл бұрын
Thank you for sharing, you can watch my video and control the linear actuator with your mobile phone.
@kaldonha74484 жыл бұрын
كيف استطيع التحكم ب نصف الحركه عن طريق الكهرباء
@Kevintheguitarlord4 жыл бұрын
Cool video. Thanks.
@ISILENTNINJAI5 жыл бұрын
Would you recommend a dual acting or single acting cylinder for making a power draw bar for a milling machine? I need a bout 2000lbs of force.
@geospectrum5 жыл бұрын
Thanks. Subscribed. I’m interested in automation, I’m making a new product which uses some tech from CNC’s, extrusions etc . At the moment I’m working on a optional motorised element which uses open builds belt and pinion a dc motor and microswitch’s. simple enough but I’m completely new to this stuff!
@bldjln31585 жыл бұрын
Pneumatics are something that are best learned hands on.
@prestoncopeland5875 жыл бұрын
Hello, what would the name of that pneumatic kit of parts be called, that you ordered off E-Bay? Thanks,
@grahamheywood27605 жыл бұрын
We have had a Silver crest bathroom Scale for about three years and although it is still working well the thing that frustrates me is that it is nigh impossible to clean under the glass where dust and stains between the glass surface and the name of the name Silvercrest. The space between the two surfaces is very narrow and difficult to put anything between the surfaces. Any answers Graham?
@masoudsaket33815 жыл бұрын
Hi. Thanks for your information.
@jaya-jayaindunesia72235 жыл бұрын
muck voice
@cheyannemahaffy6915 жыл бұрын
I don't wanna lift mine up in case there's a spider under it 😂
@adelekeojudun57585 жыл бұрын
@widgetwerks Any name for the electrical component @ 7:07 ?
@toothspic25 жыл бұрын
Pneumatic valve
@yoksel5 жыл бұрын
Hi thank you for this demonstration. I wonder if you can help me with calibrating weights with this kind of scales.
@dokbob57955 жыл бұрын
You are not a hoarder. You are a custodian of objects that will be appreciated in years to come.
@manulepereira65635 жыл бұрын
nice sharing ,just subscribed , Thank you
@SofieXLoves5 жыл бұрын
And does any one knows what do do when my weight calculater doesnt work properly? Tnx for sharing
@nemnoton6 жыл бұрын
I have a kind of expensive Beurer scale which was submerged in water, and then stopped working. It works for a while, then the batteries dies quickly. It seems that Im supposed to just through it away, though it's annoying how such an expensive thing can be so sensitive to water, I mean it's supposed to be on a bathroom floor . And it does work, it's just that the batteries dies in a few hours, so my feeling is that it could be fixed.. But I can't even open it, there are no screws or anything. So I'm supposed to through it away... I don't like that, but what can I do. I asked at an electronics store, but they couldn't help.
@clarkss126 жыл бұрын
I love it..........
@Edster8386 жыл бұрын
where can i get pneumatic cylinders
@cameronempey83506 жыл бұрын
Cool stuff man im fascinated with this
@rmhutchins76 жыл бұрын
Great idea! I was looking for a pneumatic clamping system for my chop saw.
@GuilhermeLopes-dl5tr6 жыл бұрын
Hello, could you tell me why 4/2 way valves stopped being produced and replaced with 5/2 valves?
@sajidsarkar95746 жыл бұрын
Can you make a video on Pneumatic Motors?
@waqargul54356 жыл бұрын
2:21 OMG, lot of neodymium magnets... i barely have 9 or 10
@codec0wboy6 жыл бұрын
Any tips on removing the bearings from inside the motor?
@zziton756 жыл бұрын
it's really help the n my scale is the same problem like u.
@gamie1234566 жыл бұрын
thank you ,good effort.
@raptraerialimagery47416 жыл бұрын
I have a small project i'm working on in which I would like to quickly tip a coffin (with an actor inside) onto its side so the actor falls out. The coffin will be on a table and dressed accordingly so I can put Actuators or Pistons underneath. My idea is to have 2 Pistons/Actuators under the table and hinge the opposite edge of the coffin to the table so it doesn't move. I'd need a fast action piston/actuator to make the gag look realistic, so what would you suggest? Thanks in advance and great video
@raptraerialimagery47416 жыл бұрын
I guess the piston or actuator only needs to lift the coffin past a 45 deg angle before the weight of the body does the rest as it rolls out of the coffin.
@raptraerialimagery47416 жыл бұрын
I have a quick little project and I wondered if you can help? If I wanted to tip over a coffin with a real person in it, what setup would you recommend please. Its for a haunted house
@raptraerialimagery47416 жыл бұрын
I do have a 12v Firing box for Pyro if it could activate from that?
@AnwarAlfaqeehAlhusseini6 жыл бұрын
is there any way to control speed for 4 cylinder by 1 click or 1 place
@steveho12206 жыл бұрын
If you want to find one actuator which can open the window automatically, I know one linear actuator site can be OK. It is: www.powerjackmotion.com
Пікірлер
Close up would have been nice!
Well done! You are an inspiration. I will check my old scales too and see if it can be fixed. I hate to throw things out without a stab at fixing it. Cheap Chinese junk manufacturing!
Those are from a barn door…. 👍👍
can you convert duel action pneumatics to hydralics
I wish you had links on here for your website and especially you other youtube channel. I can't find either.
While supplying the battery from outside to the bathroom scale, I connected the battery plus and minus terminals in reverse. Now it doesn't work at all. How can I fix it?
what kind of cord did you use?
Hey, what would I need in order to be able to control force, so let's say it's some kind of actuator that can pull max force of 100lbs but if I set it half way then I can still pull the full range of actuator range but it would be 50 lbs, quarter setting 25lbs, ect.??? So like a shock absorber but with on the fly resistance control?
“Simple fix” The fix: *rocket science*
Hi, I I have a pneumatic can crusher. I'm just wondering, are you supposed to oil the cylinder as you would with a pneumatic tool? Or would that ruin the internal seals? I know this is an older video but thanks in advance for any help.
my slim-talking scale stop working ( few months of use ) blink Err and 0.00 back and for
scales are deceiving.
After watching the video, I have my scale fixed, without soldering whatsover, or opening up. Just changed the battery, being inspired by the mentality of 3 Rs, recycle, reuse, reduce.
Hi. I have a 80 inch x 80 inch solar panel ontop of a sprinter van roof rack. Can you help me with what size actuator i would need to lift the panels from flat to 90 degrees. They are hinged atm like a trap door Thankyou
How r u I like this can you call me I need some information you can call me any time. 732 309 4200 cell Albert jasani
The LCD screen's bottom half is faded. I put in new batteries but did not fix problem
I'm really not trying to be an asshole here, however why on earth would people pay for a little piece of metal, that can get lost, when there is literally a very simple knot that does this same thing?
I was wondering the same thing...
Hi.. Thanks for your video.. Very informative.. Maybe I'm late and you don't post videos anymore but can you tell me if there are any dual small cylinders that can be used.. Like hand size cylinders and be thin as well.. Thanks again sir
Hi, I wonder if you could help me, I'm trying to develop a weighing scales that has a built-in max and minimum alarm. The reason for this is I'm in the process of setting up a weight loss business and I don't want my patients to be able to see their weight. Ideally what I want is for them to stand on the weighing scales and if they go over a preset maximum weight, an alarm will go off and similarly if they go below a preset weight an alarm will go off....would appreciate any guidence on the matter.
Thank you for sharing, you can watch my video and control the linear actuator with your mobile phone.
كيف استطيع التحكم ب نصف الحركه عن طريق الكهرباء
Cool video. Thanks.
Would you recommend a dual acting or single acting cylinder for making a power draw bar for a milling machine? I need a bout 2000lbs of force.
Thanks. Subscribed. I’m interested in automation, I’m making a new product which uses some tech from CNC’s, extrusions etc . At the moment I’m working on a optional motorised element which uses open builds belt and pinion a dc motor and microswitch’s. simple enough but I’m completely new to this stuff!
Pneumatics are something that are best learned hands on.
Hello, what would the name of that pneumatic kit of parts be called, that you ordered off E-Bay? Thanks,
We have had a Silver crest bathroom Scale for about three years and although it is still working well the thing that frustrates me is that it is nigh impossible to clean under the glass where dust and stains between the glass surface and the name of the name Silvercrest. The space between the two surfaces is very narrow and difficult to put anything between the surfaces. Any answers Graham?
Hi. Thanks for your information.
muck voice
I don't wanna lift mine up in case there's a spider under it 😂
@widgetwerks Any name for the electrical component @ 7:07 ?
Pneumatic valve
Hi thank you for this demonstration. I wonder if you can help me with calibrating weights with this kind of scales.
You are not a hoarder. You are a custodian of objects that will be appreciated in years to come.
nice sharing ,just subscribed , Thank you
And does any one knows what do do when my weight calculater doesnt work properly? Tnx for sharing
I have a kind of expensive Beurer scale which was submerged in water, and then stopped working. It works for a while, then the batteries dies quickly. It seems that Im supposed to just through it away, though it's annoying how such an expensive thing can be so sensitive to water, I mean it's supposed to be on a bathroom floor . And it does work, it's just that the batteries dies in a few hours, so my feeling is that it could be fixed.. But I can't even open it, there are no screws or anything. So I'm supposed to through it away... I don't like that, but what can I do. I asked at an electronics store, but they couldn't help.
I love it..........
where can i get pneumatic cylinders
Cool stuff man im fascinated with this
Great idea! I was looking for a pneumatic clamping system for my chop saw.
Hello, could you tell me why 4/2 way valves stopped being produced and replaced with 5/2 valves?
Can you make a video on Pneumatic Motors?
2:21 OMG, lot of neodymium magnets... i barely have 9 or 10
Any tips on removing the bearings from inside the motor?
it's really help the n my scale is the same problem like u.
thank you ,good effort.
I have a small project i'm working on in which I would like to quickly tip a coffin (with an actor inside) onto its side so the actor falls out. The coffin will be on a table and dressed accordingly so I can put Actuators or Pistons underneath. My idea is to have 2 Pistons/Actuators under the table and hinge the opposite edge of the coffin to the table so it doesn't move. I'd need a fast action piston/actuator to make the gag look realistic, so what would you suggest? Thanks in advance and great video
I guess the piston or actuator only needs to lift the coffin past a 45 deg angle before the weight of the body does the rest as it rolls out of the coffin.
I have a quick little project and I wondered if you can help? If I wanted to tip over a coffin with a real person in it, what setup would you recommend please. Its for a haunted house
I do have a 12v Firing box for Pyro if it could activate from that?
is there any way to control speed for 4 cylinder by 1 click or 1 place
If you want to find one actuator which can open the window automatically, I know one linear actuator site can be OK. It is: www.powerjackmotion.com