www.neo7cnc.com This is a pneumatic clamp I made to assist with securing long boards while cutting. UPDATE - New version on the website with parts list
Жүктеу.....
Пікірлер: 15
@evbunke213 жыл бұрын
GENIUS! This could solve issues I've had with cutting long aluminum extrusion, thank you! I now want to build an array of these to use instead of stupid c-clamps, just because its so cool!
@widgetwerks13 жыл бұрын
@nopriors non electric yes. It's basically a toggle switch type pneumatic valve. You could even use a ball valve. This is a very old Martonair valve. Thanks for stopping by.
@diyengineerUSA13 жыл бұрын
This is amazing. I want to use a array of air cylinders to hold down my sheet metal to my table on my cnc machine. I would have to mount them horizontal though to fit under my gantry and some kind of cam to pinch the metal to the table. Very nice though!
@rmhutchins76 жыл бұрын
Great idea! I was looking for a pneumatic clamping system for my chop saw.
@widgetwerks10 жыл бұрын
I'm running a 26 gal compressor. Nothing fancy. On the air pressure, I just go by feel. If I have a large board that hangs way out, I up the pressure to keep the board flat. You could add a drop of air tool oil to the cylinder every so often. When these types of cylinders are used in automation there is usually some type of oiler inline with them. Thanks for watching.
@CSSIandAssociate10 жыл бұрын
Hi great video. Can you post the manufacturer and the Part number? Most appreciated not sure if that is a Bimba brand well anything would help in my research. I also want to do this with a kreg jig and some other items. Thanks....
@widgetwerks12 жыл бұрын
@johnnytheprick Thanks for stopping by.
@widgetwerks12 жыл бұрын
It's a very old cylinder and has no markings. Just look for one with a decent bore. This one is spring return but you could also use a double acting as well.
@armourmetals10 жыл бұрын
@Evan, Meee too. Nice vids man.
@ErezAcker10 жыл бұрын
Thank you for the kick in the right direction.
@jessestrum10 жыл бұрын
thanks for the post solved a few problems for me
@ErezAcker10 жыл бұрын
Very cool! I happen to have a couple of cylinders similar to this one lying around. I assume my air compressur can run them... but how can I tell how much preasure to use? also, do these need any kind od lubrication like other air tools? thanks a lot.
@Capnmax11 жыл бұрын
Slick!
@cravensboughner24257 жыл бұрын
if you want to know more about surviving , just go to ShepherdSurvives website. There you'll find your answers :)
Пікірлер: 15
GENIUS! This could solve issues I've had with cutting long aluminum extrusion, thank you! I now want to build an array of these to use instead of stupid c-clamps, just because its so cool!
@nopriors non electric yes. It's basically a toggle switch type pneumatic valve. You could even use a ball valve. This is a very old Martonair valve. Thanks for stopping by.
This is amazing. I want to use a array of air cylinders to hold down my sheet metal to my table on my cnc machine. I would have to mount them horizontal though to fit under my gantry and some kind of cam to pinch the metal to the table. Very nice though!
Great idea! I was looking for a pneumatic clamping system for my chop saw.
I'm running a 26 gal compressor. Nothing fancy. On the air pressure, I just go by feel. If I have a large board that hangs way out, I up the pressure to keep the board flat. You could add a drop of air tool oil to the cylinder every so often. When these types of cylinders are used in automation there is usually some type of oiler inline with them. Thanks for watching.
Hi great video. Can you post the manufacturer and the Part number? Most appreciated not sure if that is a Bimba brand well anything would help in my research. I also want to do this with a kreg jig and some other items. Thanks....
@johnnytheprick Thanks for stopping by.
It's a very old cylinder and has no markings. Just look for one with a decent bore. This one is spring return but you could also use a double acting as well.
@Evan, Meee too. Nice vids man.
Thank you for the kick in the right direction.
thanks for the post solved a few problems for me
Very cool! I happen to have a couple of cylinders similar to this one lying around. I assume my air compressur can run them... but how can I tell how much preasure to use? also, do these need any kind od lubrication like other air tools? thanks a lot.
Slick!
if you want to know more about surviving , just go to ShepherdSurvives website. There you'll find your answers :)