Пікірлер

• 
  @TLCBB4 күн бұрын

  What are the tools and machines did you use and how much is each for the tools and machines and what was the measurements for the pink foam and the wood. Or do you have videos explaining

• 
  @Kameolontti7 күн бұрын

  There are a lot of metal casting videos as of late on KZread. This video is among the best based on a large sampling. Many people wish to make videos and appear as knowledgeable and they often give inferior and flawed instructions that will result in a lot of wasted effort and potential for long term flawed and erroneous methodology. This is a great video for 'small scale lost plastic 3D printed model metal casting' and offers good instructions and sound methodology.

• 
  @stevebosheemy47239 күн бұрын

  I purchased those schematics from you back in the day but life happens. Haven’t been able to make a turbolator. You selling them?

• 
  @alexa.davronov153713 күн бұрын

  What the liquid you have poured into the bucket? Was it a liquid sodium silicate or what?

• 
  @niklasendler317713 күн бұрын

  Hello, great video! Quick question - how come you used two bearings opposed to just one? (to get more shaft engagement b/w the bearings and the rectangular "shaft"?)

• 
  @Grunblau13 күн бұрын

  Thanks! Two bearings limit the play that a single set would have. If you cut a section through the shaft you would see four bearings in the section rather than two. The further these bearings are apart, the more resistance to rotation there will be. -|:|- vs -|:|-|:|-

• 
  @niklasendler317711 күн бұрын

  @@Grunblau Thanks for the reply! I see - did you try just one bearing originally?

• 
  @infinitetanner15 күн бұрын

  Do you take on commissions? I bought a Pontiac (dream car) and one part, about the size of my fist, GM stopped making, and its made out of aluminum cast metal. Let me know, Thank you-

• 
  @Grunblau14 күн бұрын

  I don’t generally entertain commissions… I get a lot of requests and they rarely go anywhere after I quote the work involved. The best I can offer is putting up enough info for people to pursue their own projects. There are a lot of ways to approach the part you reference that might include investment casting. Most likely it would be best to ask a machine shop that would produce it from billet aluminum and use steel inserts for what look like vacuum ports (not in my wheelhouse). Hope this helps!

• 
  @TLCBB15 күн бұрын

  do you have any tip for making something like that level without a leveller

• 
  @Grunblau15 күн бұрын

  Make sure the bottom of the pond is level and adjust from there if it isn’t with sheets of pond liner. Then after placing the base, check the rim as best you can with an 8’ level. Install the bowl and check again. Could ultimately shim bowl too worst case…. Got pretty lucky in this case that the pond contractor had made the bottom of the pond extremely level!

• 
  @tbagindustries433115 күн бұрын

  First time ive seen someone doing stop start weld technique to prevent cooking the steel, nice work

• 
  @dhanujakahatapitiya19 күн бұрын

  its 223k subscribers now

• 
  @4TheFellas19 күн бұрын

  9 sheets of 3/4 BB??? Sheeesh ! Thats a $1000, sheet goods rack

• 
  @Grunblau14 күн бұрын

  $45 per sheet out the door from the before times…. I would not use precious BB now. Used to be 1/2 the price of a nice veneer plywood. No longer the case.

• 
  @4TheFellas14 күн бұрын

  @@Grunblau it's nearly unreasonable to use now

• 
  @nahmend698721 күн бұрын

  hi sir I admire your work on casting metals, could you do a video only on the tools , materials, and organization of your workshop and how you prepare yourself and set things up before a metal casting around your workshop

• 
  @user-mh9rl7eb7c21 күн бұрын

  Cred, ca e dragut si calitate

• 
  @NiChaos28 күн бұрын

  This guy is amazing. He managed to condensate TOO MUCH KNOWLEDGE in an 11 minutes video. The world need more people like you man! Thanks!!!

• 
  @ronaldmcdonald8303Ай бұрын

  What I like about using metals to make products is you can always recycle them, metals and elements meaning they need degraded after recycling, so you can use them over and over again!!!!

• 
  @ronaldmcdonald8303Ай бұрын

  Aluminium is my favourite metal, aluminium 7075 is allegedly stronger than most types of steel alloys. It's usually in the airspace industry. I think cars should be made from aluminium or stainless steel because it won't rush, not even in salt water or after several decades.

• 
  @toddkamuf6814Ай бұрын

  Just looked at your KZread page, you make some awesome stuff

• 
  @toddkamuf6814Ай бұрын

  Very nice, love the cash pocket!!! Awesome video, just letting you l am going to borrow your cash pocket idea for my credit card wallet that l make!! I am a barber by trade but a leather worker hobbyist at night when l get home from work.

• 
  @johnquijote7194Ай бұрын

  The fact that I haven't seen this channel before is just more proof that the YT algorithm is trash. <subscribed>

• 
  @GrunblauАй бұрын

  Thanks! I have a few videos in process while they figure out how to be better. Maybe you and I should start our own platform! I know millions of people that would love to go back to KZread c. 2017

• 
  @amechealle5918Ай бұрын

  This is exactly why I bought these too! I didn’t do the major modifications but I love my mobile work bench!

• 
  @GrunblauАй бұрын

  Yup. I could see the potential. Especially for a small shop!

• 
  @JuanPablo-wg9bk2 ай бұрын

  ❤

• 
  @MegamailingOficial2 ай бұрын

  Amazing !

• 
  @GustavoGuevara1232 ай бұрын

  Hola, excelente, el motor que sostiene a la cuchilla esta energizaqqdo como para girar hacia la direccion de corte? Si es asi, podrias explicar como es su conexion con la placa por favor? Muchas gracias.

• 
  @user-rs19902 ай бұрын

  Next time, try using a piece of angle steel to rest the crucible on when pouring to reduce the risk of the wood catching fire. ;-)

• 
  @bartondsmith2 ай бұрын

  Wow this was so impressive. You must have really wanted that hook 😂

• 
  @atmm892 ай бұрын

  Brian, could you do a video on your poring tongs, they look fantastic and safe, thanks, Allan

• 
  @GrunblauАй бұрын

  I hope you found my pouring tongs video by now ;)

• 
  @atmm892 ай бұрын

  wish I had a better look at your poring tool set up, it seam so easy and safe, all the best. Allan

• 
  @dacdac45012 ай бұрын

  What an amazing video! Well done sir!

• 
  @GrunblauАй бұрын

  Thanks!

• 
  @Tiebox2 ай бұрын

  Have you ever tried cold casting? I find it to be much easier, more accurate and hassle free.

• 
  @kensato88352 ай бұрын

  Can you make golf irons?

• 
  @PapayaPositive2 ай бұрын

  Ok, NOW I want to get into 3d printing. Not before watching this video, but after watching this video. 🤩

• 
  @jimirk62262 ай бұрын

  Very nice works great

• 
  @TMacDo2432 ай бұрын

  Forgive me for my ignorance; but I have a question. While your end product does look amazing, are you sure you aren't just doing double the work with refining the 3D print? I'm new to casting but am experienced in 3D printing. Are you sure the post processing of the print is really worth it? It doesn't seem to me the initial cast really showcases the processing you did on the 3D print. Or are you just very particular in your work?

• 
  @GrunblauАй бұрын

  I still intend to do a run of these for Christmas presents… in that case I think I will be happy I have a smooth print. I will likely try to use Petrobond instead to reduce effort on multiples. With a smooth pattern, I could also produce a way mold for investment casting and do a tree of them at once!

• 
  @TMacDo243Ай бұрын

  @Grunblau oh OK makes sense. I did my first casting from 3D print using petrobond the other week and it turned out really well making my own nordic gold for a coin. I was surprised that it did pick up the print lines, but still looks great with minimal processing.

• 
  @RodgerRamJet-cz7xd2 ай бұрын

  I prefer steelwool when using with metals easier to use with same outcome

• 
  @MoralConflict2 ай бұрын

  Without talking your video is garbage. Use your words. Nobody wants to read your video

• 
  @hariyanto-wp5nq2 ай бұрын

  wow , what kind the sand that you use for

• 
  @PunkR0ckz092 ай бұрын

  The biggest plague in any workshop is those pesky lower than 8 feet garage door rails. I have a 9'x7' garage door and my rails are at around 7'4" if I remember properly, so I cannot load a sheet vertically close to the door unless I dance with it (lower it to get through the garage door, than turn around and then raise it again.) and to unload it is even harder in the winter, as you have to take into consideration the 4' you need to get it out of the storage system, which means you then need a 8'6" diagonal clearance at minimum. This is a very clever idea though, putting the sheets at an angle to reduce the footprint... still an issue if you have a garage door in the way though :(

• 
  @Grunblau2 ай бұрын

  This storage was primarily to store thin sheets for a vacuum former. If you look closely, I think I acknowledged how much floor space it takes to get it out of the system as a lot of people miss this. Same with ripping on a table saw! So far, it has been great addition to the shop using vertical space that is usually wasted. But this only works with a floor to ceiling of greater than 8’.

• 
  @PunkR0ckz092 ай бұрын

  @@Grunblau Yes indeed, you mentioned the footprint required to take the sheets outs on a regular setup. However, you didn't mention that you need an unobstructed 8+ feet of vertical space for your design to load it easily. In my example, I was refering to the tracks of a standard 9'x7' garage door, they are generally at around 7'4", which is lower than 8', which means it wouldn't be easy to load it... but still doable, need to angle the sheet before loading it. This isn't specific to your design though, it was just an observation for others to think about as I was looking over other people's design to see if anyone had came up with a solution to less than 8' high tracks that gets in the way heh.

• 
  @user-tk5yg6re5x2 ай бұрын

  Apakah ada tambahan sodium silicate?

• 
  @gmangladman2 ай бұрын

  this is interesting, I can't wait to try it

• 
  @supertonyjr89032 ай бұрын

  Blud did NOT have to do allat 😭🙏 Still tho, nice demonstration and skills

• 
  @aaronschen98963 ай бұрын

  Very nice. Decent coat hooks are like 7$ on Amazon, but sometimes the hard way is the best way.

• 
  @doganaydogan11783 ай бұрын

  Don't tell me.. you are virgo right?

• 
  @dpgedward59473 ай бұрын

  I was thinking it was a phone stand from the offset

• 
  @Axemanvan3 ай бұрын

  All that to have it looking like the wall mount plate was an afterthought, why didn’t you make a recess in the back for it to sit flush against the wall?

• 
  @awesh10003 ай бұрын

  Could you please tell me what is the name for the brown sand that you put it in the wooden book. ❤

• 
  @Grunblau3 ай бұрын

  This is Petrobond sand.

• 
  @awesh10003 ай бұрын

  Could you please tell me what is the name for the brown sand that you put it in the wooden book. ❤

• 
  @MboeraKisaroKimambo-cu4xh3 ай бұрын

  Very impressive

• 
  @Eric-gi9kg3 ай бұрын

  I figured at the end I was going to need to ask for plans. But I was pleasantly surprised that you shared everything as you went. I've hundreds of DIY videos of "How To," but they never share dimensions.. they want money for a sketch. This DIY video is 10 stars The fast foreword is clean and clear. Minimal verbal. Absolutely Awesome Thanks

• 
  @MsDabree3 ай бұрын

  Just wow

• 
  @mxrius17393 ай бұрын

  The probably most expensive wall hook ever made.

• 
  @barretmarshall3 ай бұрын

  I appreciate knowing why. It’s like teaching a man to fish.