Instructional automotive videos from ASE World Class tech and college instructor Mr. B! Please subscribe for up to date videos and tutorials. I make these videos to save you money and make you smarter!
Блэт на Авео итак места нет, они туда ещё и А14 NET засунули!!! Слава богу, что их в Россию не поставляли
@harwoods11Күн бұрын
Great video 👍
@DrRichtofenXxКүн бұрын
Great video! My high-temperature warning light came on randomly one day at 150k miles on my CT200h. I replaced the water pump using the Aisin from Rock Auto because I've been burned too many times by Amazon counterfeits and didn't want to take a chance with my car. The tip about turning the wheel to the right and accessing the bottom bolt from the wheel well worked really well! Personally, I found it easier to get the three bottom bolts from that area and the top two from above. I also went to O'Reilly to buy a radiator coolant hose to connect to the drain hole for the coolant, so I didn't have to completely remove the panels. I used a bucket when I removed the water pump and placed it behind the pump when looking from the bottom.
@AutoScholarwithMrBКүн бұрын
There are many fakes on Amazon, but the link in the description is Aisin’s Amazon store. Thanks for the other tips and thanks for watching!
@danielamariei9153Күн бұрын
Hello, I tried o install the same radio on my Honda jazz/fit 2012. Previously I had a Pioneer SPH-DA120. After installation, I have noticed that I do not have any sound. Could you please help me with that? Thank you!
@AutoScholarwithMrBКүн бұрын
Outside of checking all your connections, you may have a faulty unit. If they look good I would see if they could exchange it for you.
@Resham-hc5ym2 күн бұрын
My machine is stuck on the instruction LOW SIDE CLEAR IN PROGRESS
@Resham-hc5ym2 күн бұрын
Please advise what to do
@josegarcia-th3pj2 күн бұрын
there's a way to decide where the leak come from(abs module or break pump)
@michaelhotz67572 күн бұрын
A very well done video! Bookmarked for when I have to do the job.
@demarcorosas38502 күн бұрын
The styling is far different from the two.
@dwpresten3 күн бұрын
Wow you made the best auto how to video I have ever watched. Thank you
@larrymendoza25703 күн бұрын
Thank you! Brilliant insights! My question is this: I’m super familiar with the Ford hybrid/ PHeV implementation, which uses two electric motors! Their explanations seemed to say that the 2nd smaller motors was for dedicated Regen. Seems inefficient and I didn’t understand why… here you stated that the second smaller electric motor serves as the alternator/ starter (I now get that!) (Q1) Is this also true in the Ford implementation? (2) I just purchased that 2017 Ford Focus EV, all electric. Does the FFE use two electric motors like Ford hybrid solution? Or does it only use one? Thanks!!!
@ntelas463 күн бұрын
How frequent is the problem?
@AutoScholarwithMrB3 күн бұрын
Hard to say, but seems to show up around 150,000 miles at the earliest.
@Melvinkj3 күн бұрын
Mine is reads 0.01v is that ok?
@AutoScholarwithMrB3 күн бұрын
Should be fine
@kevinhawley9623 күн бұрын
tf are u talking about the sai 300 bucks for my a4
@maxbeckwith94 күн бұрын
Thank you for making this video !!
@Prisonmike894 күн бұрын
None of the videos show torquing the crank bolt. Are they just doing it gutentight or actually doing 190 lbs ft
@chuckr87274 күн бұрын
Lot of good information. Thanks. A little more info on how to remove that wire connector at the coil pack would have been even more helpful.
@ejvilla764 күн бұрын
This has got to be the most f'd up design I have ever seen from vw. What were there engineers smoking when they made this? What happened to designing a car that doesn't require a mechanical engineering degree to work on? This is f'd up vw!!
@psychiatry-is-eugenics4 күн бұрын
4:54 disconnect both batteries to do an oil change ?
@Thefisherman-qr6is5 күн бұрын
I don’t want to jinx myself but did my entire repair with this video. Only thing I had to additionally replace was the crankshaft position sensor.. not sure why?? But I’m 70 miles in and running great. Thank you!
@AutoScholarwithMrB5 күн бұрын
Thanks for watching!
@SoDakFab5 күн бұрын
I know that is video is pretty old, but I have a question. The 2 red wired on the ignition. You mentioned that you could run a jumper wire and make the starter crank. We'll I took a test light to both of the big red wires and they both have power. Is that supposed to be like that?
@MattBarthold-f6u5 күн бұрын
Dose the same wiring harness have the trans temperature sensor in it?
@weballoy5 күн бұрын
Hey guys. Can anyone verify that an android media player will not drain the battery of the car faster in everyday use? Honda Fit/Jazz have notoriously small batteries.
@keno776 күн бұрын
Hands down the best tutorial video I ever seen about this issue with the 1.4 turbo cam chain, I think where I live no one will do this work,they just tell you to drive as long as it last and then they replace the whole engine from some dissembled car.😂
@AutoScholarwithMrB6 күн бұрын
Thank you for your kindness!
@cristalmorales85537 күн бұрын
Hello Mr.B. Would you be able to do a video on how to replace a secondary air injection pump in a 2018 VW Tiguan, please, and thank you.
@Jason.047 күн бұрын
this was the most helpful video ive watched in regards to the timing chain alignment on this engine. thank you for taking the time to do this
@organicvids8 күн бұрын
9:16 noooooo water. Use duster or comp air.
@xalkingol8 күн бұрын
Мне кажется что Тойоте следовало бы начать отзывную кампанию по исправлению данной неисправности ввиду её большой опасности для движения автомобилей, как было сделано с помпой инвертора и валом рулевой колонки, да и что греха таить с фирменными тойотовскими ковриками попадающими под педаль газа.
@user-ms7um1ge5j9 күн бұрын
For that galvanic activity there must be a part of the system acting as a sacraficial anode. The system is rotting?
@mirzm16179 күн бұрын
That video is super long
@carrotvegietable44369 күн бұрын
Completely dropped the ball not showing you removing the a pillar. How do I get this out??
@nikasvianadze19349 күн бұрын
Hello, I have a lexus hs250h 2010 and I have these error codes in ABS. c1259 c1310
@nikasvianadze19349 күн бұрын
I want to repair and can you give me advice?
@kristinaamante407410 күн бұрын
Help: So I replaced my head gasket myself about 3-4 months ago and when it was time to do an oil change, I noticed an oil leak and almost two quarts missing. I was hoping it was the timing cover because it was only to that side, but to my dread, it does look like it maybe the gasket, but it's hard to tell being so close to where it meets the timing cover. Any advice or tips on how to proceed / what potentially I did wrong? How much time do I have with a slow oil leak potentially from a HG because it might be a while until I can tackle this project again, will driving it and topping off be okay for a bit? Thanks.
@AutoScholarwithMrB10 күн бұрын
The chain tensioner gasket is a problem area for oil leaks on these along with the timing cover. I’ve never seen the head gasket externally leak oil.
@kristinaamante407410 күн бұрын
is there any way to email a picture to make sure that's what it is? We are praying we don't have to do the head again 😭. Thank you!! We had a trip planned but cancelled due to the oil leak we found. We were so nervous that something was wrong.
@AutoScholarwithMrB10 күн бұрын
@@kristinaamante4074 if you’d like you can send it to me on Facebook. Look up Auto Scholar with Mr. B.
@Kei-Kei10 күн бұрын
Holy Isht!!!! Can I borrow $1000 till the 33rd of Nevuary? I’m good for it. Promise. Tools are expensive!
@DanielMaroca11 күн бұрын
Thank you for your good information. It would also be good if you made a video indicating the disconnection of the high voltage battery.
@denverizzles11 күн бұрын
Does this automatically clear the maintenance required for cooling parts notice?
@omiddanish129511 күн бұрын
Can you drop the link for that Gasket please
@AutoScholarwithMrB11 күн бұрын
Links are in the description
@thatoo684211 күн бұрын
Thank
@jonnybritnorth796611 күн бұрын
excellent
@billyporch919812 күн бұрын
You did a terrific job on how to do this. I appreciate it. It wasn’t that bad once I saw you do it.
@AutoScholarwithMrB12 күн бұрын
Glad to be a help, Billy. Thanks for watching!
@logankelim594612 күн бұрын
Great advice, thanks for the video.
@bradlincoln241812 күн бұрын
What do you do when it says high tank pressure
@bradlincoln241812 күн бұрын
I got the same machine what does tank pressure means?
@BrettHoustonTube13 күн бұрын
Thanks so much. What a cool idea and it worked so much better.
@zacharycorriveau20013 күн бұрын
Thorough! I hear caliper piston alignment on the brake pad is a concern when installing new brake pads to avoid uneven wear. How would you recommend that?
@mathewswortchek192914 күн бұрын
does this take a 3/8 or 1/2 in driver/torque wrench?
@AutoScholarwithMrB14 күн бұрын
3/8
@renescocina919914 күн бұрын
My ct200h has been the most expensive and troublesome toyota I've ever owned, between the headgasket failing, and hybrid battery replacement in 6k in the hole. Now the waterpump failure.
@epasternak420614 күн бұрын
Is that lip seal tool really needed?
@AutoScholarwithMrB14 күн бұрын
It helps. Might be able to sneak it in without it
@epasternak42063 күн бұрын
This is a ton of fun, working on my Corvette is like an addiction haha.
@mentals55514 күн бұрын
Thank you for this video. Followed your directions, and without really rushing I took about 12 hours from start to finish. Cleaning the sealing surfaces was the most annoying part of the job. Thank you again.
@AutoScholarwithMrB14 күн бұрын
Glad to help!
@Zeek80015 күн бұрын
Yes you can buy the seals separately , one per package so get two. I would replace the rubber seals regardless of the condition of the old one, cheap insurance. Make sure to note when you take the old seal off which side goes towards the actuator as the seal actually has one side that is slightly different than the other. Brake cleaner is great stuff but wouldn’t MAF Sensor cleaner be better to use in this case because it doesn’t leave any “ residue “ and you don’t want to chance it with these vital parts.
@michaelreuss474115 күн бұрын
The Frankfurt is the better option, imho. The LED colour indeed is a bit too weak, especially with sunlight. Sound quality is perfect.
@AutoScholarwithMrB15 күн бұрын
That is what I am hearing as well. I think the Frankfurt would work well in an e36 design wise, but look a little off in an e30. That’s why I went with this one. Definitely having second thoughts about that. Thanks for your comment!
Пікірлер
Блэт на Авео итак места нет, они туда ещё и А14 NET засунули!!! Слава богу, что их в Россию не поставляли
Great video 👍
Great video! My high-temperature warning light came on randomly one day at 150k miles on my CT200h. I replaced the water pump using the Aisin from Rock Auto because I've been burned too many times by Amazon counterfeits and didn't want to take a chance with my car. The tip about turning the wheel to the right and accessing the bottom bolt from the wheel well worked really well! Personally, I found it easier to get the three bottom bolts from that area and the top two from above. I also went to O'Reilly to buy a radiator coolant hose to connect to the drain hole for the coolant, so I didn't have to completely remove the panels. I used a bucket when I removed the water pump and placed it behind the pump when looking from the bottom.
There are many fakes on Amazon, but the link in the description is Aisin’s Amazon store. Thanks for the other tips and thanks for watching!
Hello, I tried o install the same radio on my Honda jazz/fit 2012. Previously I had a Pioneer SPH-DA120. After installation, I have noticed that I do not have any sound. Could you please help me with that? Thank you!
Outside of checking all your connections, you may have a faulty unit. If they look good I would see if they could exchange it for you.
My machine is stuck on the instruction LOW SIDE CLEAR IN PROGRESS
Please advise what to do
there's a way to decide where the leak come from(abs module or break pump)
A very well done video! Bookmarked for when I have to do the job.
The styling is far different from the two.
Wow you made the best auto how to video I have ever watched. Thank you
Thank you! Brilliant insights! My question is this: I’m super familiar with the Ford hybrid/ PHeV implementation, which uses two electric motors! Their explanations seemed to say that the 2nd smaller motors was for dedicated Regen. Seems inefficient and I didn’t understand why… here you stated that the second smaller electric motor serves as the alternator/ starter (I now get that!) (Q1) Is this also true in the Ford implementation? (2) I just purchased that 2017 Ford Focus EV, all electric. Does the FFE use two electric motors like Ford hybrid solution? Or does it only use one? Thanks!!!
How frequent is the problem?
Hard to say, but seems to show up around 150,000 miles at the earliest.
Mine is reads 0.01v is that ok?
Should be fine
tf are u talking about the sai 300 bucks for my a4
Thank you for making this video !!
None of the videos show torquing the crank bolt. Are they just doing it gutentight or actually doing 190 lbs ft
Lot of good information. Thanks. A little more info on how to remove that wire connector at the coil pack would have been even more helpful.
This has got to be the most f'd up design I have ever seen from vw. What were there engineers smoking when they made this? What happened to designing a car that doesn't require a mechanical engineering degree to work on? This is f'd up vw!!
4:54 disconnect both batteries to do an oil change ?
I don’t want to jinx myself but did my entire repair with this video. Only thing I had to additionally replace was the crankshaft position sensor.. not sure why?? But I’m 70 miles in and running great. Thank you!
Thanks for watching!
I know that is video is pretty old, but I have a question. The 2 red wired on the ignition. You mentioned that you could run a jumper wire and make the starter crank. We'll I took a test light to both of the big red wires and they both have power. Is that supposed to be like that?
Dose the same wiring harness have the trans temperature sensor in it?
Hey guys. Can anyone verify that an android media player will not drain the battery of the car faster in everyday use? Honda Fit/Jazz have notoriously small batteries.
Hands down the best tutorial video I ever seen about this issue with the 1.4 turbo cam chain, I think where I live no one will do this work,they just tell you to drive as long as it last and then they replace the whole engine from some dissembled car.😂
Thank you for your kindness!
Hello Mr.B. Would you be able to do a video on how to replace a secondary air injection pump in a 2018 VW Tiguan, please, and thank you.
this was the most helpful video ive watched in regards to the timing chain alignment on this engine. thank you for taking the time to do this
9:16 noooooo water. Use duster or comp air.
Мне кажется что Тойоте следовало бы начать отзывную кампанию по исправлению данной неисправности ввиду её большой опасности для движения автомобилей, как было сделано с помпой инвертора и валом рулевой колонки, да и что греха таить с фирменными тойотовскими ковриками попадающими под педаль газа.
For that galvanic activity there must be a part of the system acting as a sacraficial anode. The system is rotting?
That video is super long
Completely dropped the ball not showing you removing the a pillar. How do I get this out??
Hello, I have a lexus hs250h 2010 and I have these error codes in ABS. c1259 c1310
I want to repair and can you give me advice?
Help: So I replaced my head gasket myself about 3-4 months ago and when it was time to do an oil change, I noticed an oil leak and almost two quarts missing. I was hoping it was the timing cover because it was only to that side, but to my dread, it does look like it maybe the gasket, but it's hard to tell being so close to where it meets the timing cover. Any advice or tips on how to proceed / what potentially I did wrong? How much time do I have with a slow oil leak potentially from a HG because it might be a while until I can tackle this project again, will driving it and topping off be okay for a bit? Thanks.
The chain tensioner gasket is a problem area for oil leaks on these along with the timing cover. I’ve never seen the head gasket externally leak oil.
is there any way to email a picture to make sure that's what it is? We are praying we don't have to do the head again 😭. Thank you!! We had a trip planned but cancelled due to the oil leak we found. We were so nervous that something was wrong.
@@kristinaamante4074 if you’d like you can send it to me on Facebook. Look up Auto Scholar with Mr. B.
Holy Isht!!!! Can I borrow $1000 till the 33rd of Nevuary? I’m good for it. Promise. Tools are expensive!
Thank you for your good information. It would also be good if you made a video indicating the disconnection of the high voltage battery.
Does this automatically clear the maintenance required for cooling parts notice?
Can you drop the link for that Gasket please
Links are in the description
Thank
excellent
You did a terrific job on how to do this. I appreciate it. It wasn’t that bad once I saw you do it.
Glad to be a help, Billy. Thanks for watching!
Great advice, thanks for the video.
What do you do when it says high tank pressure
I got the same machine what does tank pressure means?
Thanks so much. What a cool idea and it worked so much better.
Thorough! I hear caliper piston alignment on the brake pad is a concern when installing new brake pads to avoid uneven wear. How would you recommend that?
does this take a 3/8 or 1/2 in driver/torque wrench?
3/8
My ct200h has been the most expensive and troublesome toyota I've ever owned, between the headgasket failing, and hybrid battery replacement in 6k in the hole. Now the waterpump failure.
Is that lip seal tool really needed?
It helps. Might be able to sneak it in without it
This is a ton of fun, working on my Corvette is like an addiction haha.
Thank you for this video. Followed your directions, and without really rushing I took about 12 hours from start to finish. Cleaning the sealing surfaces was the most annoying part of the job. Thank you again.
Glad to help!
Yes you can buy the seals separately , one per package so get two. I would replace the rubber seals regardless of the condition of the old one, cheap insurance. Make sure to note when you take the old seal off which side goes towards the actuator as the seal actually has one side that is slightly different than the other. Brake cleaner is great stuff but wouldn’t MAF Sensor cleaner be better to use in this case because it doesn’t leave any “ residue “ and you don’t want to chance it with these vital parts.
The Frankfurt is the better option, imho. The LED colour indeed is a bit too weak, especially with sunlight. Sound quality is perfect.
That is what I am hearing as well. I think the Frankfurt would work well in an e36 design wise, but look a little off in an e30. That’s why I went with this one. Definitely having second thoughts about that. Thanks for your comment!