Пікірлер

• 
  @MrHhhscottКүн бұрын

  I thinknit is purple heart that browned and he is getting back to the purple color.

• 
  @marbo.lee.Күн бұрын

  Why tho??😮

• 
  @gss653110 күн бұрын

  Easily the best version of this drawer system build I've seen!

• 
  @connorl245322 күн бұрын

  Way too abrasive my guy

• 
  @robkoepnick550722 күн бұрын

  Why? I'm sure that's just to get the first layer. Probably use a finer grit when finishing time comes. Idk just my take on it. Could be wrong.

• 
  @DanielDunlap21 күн бұрын

  @@robkoepnick5507you’re 100% correct.

• 
  @DanielDunlap21 күн бұрын

  False

• 
  @veritacronje135224 күн бұрын

  No explanation, doesn't help at all

• 
  @DanielDunlap19 күн бұрын

  😢

• 
  @joeyberry81928 күн бұрын

  I'm right we're you are with woodworking but I've been doing it 45 years And yes I make mistakes as well but I don't have the equipment that you have and I'm disabled now I'm 63 and have been doing it since I was 15 off and on to start . Then full time after a while and you know what they say if you have a job you love you will never work a day in your life I've done framing , boxing and siding , and my love decks I found I could be real creative with those but now I'm in a 12 x 16 shed building bird houses and such and again I can get creative with them , but I'm not online because I don't want to be pushed by anyone to hurry up because they want it now I sell a few and give a lot away , and I can't hurry anymore because of my disability and some days i cant stand up long enough to get anything done but I have fun and to me that's what it is about

• 
  @joeyberry81928 күн бұрын

  Oh and the other reason I'm not online is I don't want to hear any badmouthing, I just wish I could heat or cool my shed and the sawdust on my floor is about a inch thick in the shallow areas and 6 inches under my table saw lol

• 
  @amenterprisesllctheleaderi8129Ай бұрын

  What is the overall height of the table?

• 
  @jonwikan3986Ай бұрын

  @DanielDunlap great F ing video! Great way to keep the sawdust off all of the power tools usually stacked in that spot under the bench! and of course more space! One question for you and everyone, why the hell do people not put some finish on their drawers? I have watched a lot of these videos for ways to not use hardware and no one seems to varnish these cabinets and drawers. Maybe they do after and not on the video to save time.

• 
  @martytrudell2152Ай бұрын

  It's called blushing

• 
  @dynomytedyno6965Ай бұрын

  You can also control the environment you paint in with an ac

• 
  @kimk38422 ай бұрын

  I want it!😃🕊

• 
  @ginaterrazas852 ай бұрын

  MUY BIEN HECHO, Y MUY PRACTICO.FELICIDADES

• 
  @donatoforte28332 ай бұрын

  I liked your video, very helpful! No music or overly verbose talking, just showing how it's done - Getting ready to do this for the wife also... Thanks!

• 
  @allysonbricknall88082 ай бұрын

  Why is the kitchen "the wife's " is the toilet hers too

• 
  @llooe85322 ай бұрын

  Nice..

• 
  @sm871122 ай бұрын

  Love it, awesome video, not trying to be a comedian, or funky music, just da business. great job

• 
  @RedcarWW2 ай бұрын

  I have been looking to standardize my drawers throughout my shop. Not long ago I stumbled onto @HookedonWood. The only problem I am having with his drawer system is that it's metric. My brain just can't flip back and forth between the two. I am lucky as I don't currently have any cabinets built. Over the weekend I've been watching @JohnHeisz and his homemade drawer slides. I'm going to try them out for a Miter Saw Station cart I built from Brad @Fixthisbuildthat. There are two open areas at the top of the cart that would great to test them out. Any how, John Heisz has plans for a Large Tool Box using his homemade drawer slides. I plan to build two of those rather than stationary cabinets. My shop is is in a garage, and I like the flexibility of my tools being mobile. If I like them with the Miter Saw cart, I just might deploy them with the Large Tool Box. If I don't, then this will be the style. The main concern about the drawer system you used us humidity. I planned to use 1/2" MDF as my drawer bottoms. Which has me leaning towards the homemade drawer slides. Would love to know how your drawers are holding up.

• 
  @nakasinkiwanuka2 ай бұрын

  👍🏾👍🏾👍🏾

• 
  @franka54162 ай бұрын

  you need new sawhorses

• 
  @Phearsum3 ай бұрын

  I would recommend placing smaller magnets along the backside of the little hinge and keeping a larger handheld one inside of that room in advance. That way you can close the hinge from inside. And simply using that small gap at the top left to push it open from inside so you don't trap yourself.

• 
  @mikekevelder11933 ай бұрын

  Is it me or are you cutting that backwards

• 
  @DanielDunlap3 ай бұрын

  It’s definitely you

• 
  @frosty_photo3 ай бұрын

  Damn that was alot all at once!

• 
  @daheffa97633 ай бұрын

  I waited, I watched again and waited some more

• 
  @davidcampbell73243 ай бұрын

  I'm still waiting

• 
  @IvanHernandez-mt2yh4 ай бұрын

  Like the workmanship

• 
  @jwm7794 ай бұрын

  liar

• 
  @thomo744 ай бұрын

  Great video! You’ve got a great set up! I like how it’s not flashy and not overloaded with every red or yellow cordless power tool on the market. Thanks

• 
  @RWWarner36084 ай бұрын

  Do a real test, and leave them outside for a year. My opinion this was not any kind of a test for glues being resistant to weather.

• 
  @LimeLightsSP4 ай бұрын

  i almost wanna say, just going at it with just your hand you can be more accurate as to how you sand, it just takes longer. But hey, sometimes that end result is worth the wait

• 
  @codyellis52924 ай бұрын

  Whats that long track youre clamping down for the circ cuts?

• 
  @dumpywhiteboy74044 ай бұрын

  😂 some one wanted an excuse to laser cut sandpaper

• 
  @terrmaso4 ай бұрын

  I just used my scissors to cut pieces that fit....

• 
  @bresnik4 ай бұрын

  I’ll stick with scissors to cut my Sandpaper

• 
  @tjr_44694 ай бұрын

  i could imagine how it went to sand a wood tray too so why even watch the video...

• 
  @LavinWoodworks4 ай бұрын

  Why did you then go the step further and make a comment.

• 
  @miniard11b4 ай бұрын

  Nice tray! Those little sanding blocks are lit. Helped me out a few times. I believe they are gator brand.

• 
  @alexanderknips46904 ай бұрын

  It still does not fit in the cebter does it?

• 
  @h2s1424 ай бұрын

  Baseboard only 5/8” short

• 
  @chriskessler9524 ай бұрын

  Promo'SM 😋

• 
  @JohnPaul-sg4bs4 ай бұрын

  I watched a man on a construction job die one day, using high pressure air to blow dust off his body. He had a small cut on his hand, an air bubble entered the cut and traveled to his heart and killed him on the spot. I do not know if that blower you was using would have enough pressure to be a problem or not, but why take a chance. May the Good Lord take a liking to you!!!

• 
  @DiannaAtherton4 ай бұрын

  Can you tell me more about your table saw. I am looking for one. Thank you

• 
  @coreybrand27774 ай бұрын

  This made building a set of pillars easy!

• 
  @TimWynnAlabamaRollTide4 ай бұрын

  Excellent! Can you post a link to the hardware you used? Thx!

• 
  @garykrywko70595 ай бұрын

  About a year ago, you built a hidden door. You used a hinge on the trim so you could open the door. I need to know the type of hinge you used on the trim. I have a similar situation and would like to install hinges on my trim. I can't identify the hinge from your video. Thanks.

• 
  @garykrywko70595 ай бұрын

  Can you tell me what style hinge you used on the trim? I've looked at your video and can't figure it out.

• 
  @johndrew46895 ай бұрын

  I really enjoyed watching this video. Well done on the table. Looks fantastic! One thing I might ask is whether you wear ear protection and eye protection. I would recommend it. I'm about 60 years old and I'm suffering tinnitus and it's because I didn't use ear protection in my earlier days. Anyway, well done!!

• 
  @PkoiCetrBeLoud5 ай бұрын

  Wait for what? 🤷

• 
  @lanswyfte5 ай бұрын

  For the machine to gouge into the part of the piece that ruined the project.

• 
  @anthonycragg4515 ай бұрын

  Loved the banter you came out with. I like the make, with your permission I’d like to make one for my bandsaw

• 
  @horsesmyleenichols32925 ай бұрын

  I prefer videos with verbal instruction. But I did like this one.

• 
  @chancemccool5 ай бұрын

  In case you want to leave bread crumbs to your safe room!

• 
  @thehobbyfanatic46105 ай бұрын

  Great video brother! I am gonna give it a try.