Пікірлер

• 
  @pistolp45137 күн бұрын

  Thank you I appreciate you 😅

• 
  @detailokc73708 күн бұрын

  I had watched several videos on how to tackle this job with several videos suggesting different methods. I soaked the exhaust bolts in pb blaster the day before and decided to go with exhaust removal version. Everything went smooth, all exhuast bolts came out without issue. job took me 2.5 hours and im no mechanic. I could see exhaust bolts getting stuck being a real pain but if they come off with ease, id do it this way again.

• 
  @noble388710 күн бұрын

  I just got this problem, same exact noise as the a/c went out yesterday. Would I still be able to drive the car without damaging it until I can get it fixed?

• 
  @aslanmammadov223010 күн бұрын

  Yes it can be driven for a while

• 
  @andresissa14 күн бұрын

  Funcionó gracias gringo❤

• 
  @eugenereap736614 күн бұрын

  When searching for help nobody wants to hear unnecessary talking but this one here, My man stood on business the hold time. Thank you for saving me time and money with the savage mechanics 💯

• 
  @myredute15 күн бұрын

  All those below who say you don't have to remove the exhaust are talking rubbish. I have a 2003 E320 & it is impossible to get access to the top engine mount bolt because of the exhaust manifold. This is the best way to change engine mounts on a V6 engine & this guy is absolutely correct!!!!!

• 
  @SAKAICHEWY19 күн бұрын

  It's never ever ever ever a fuse.......

• 
  @Buckterflewae26 күн бұрын

  I got p0171 today too, without any mecanic problem.. only and high idle when I start the engine.. I think could ve the purge valve..

• 
  @Buckterflewae26 күн бұрын

  Because I don't have leaks on the pcv valve, no oil leaks..

• 
  @aslanmammadov223026 күн бұрын

  @@Buckterflewae take it one step at the time. It is not that hard to work on these engines

• 
  @kristiyan770726 күн бұрын

  NO you DON'T have to remove the exhaust 😂 and the bottom bolt is 13mm broo 😂😂

• 
  @aslanmammadov223026 күн бұрын

  @kristiyan7707 why don’t you show us how it is done ?

• 
  @myredute15 күн бұрын

  YES YOU DO when the engine is a 3.2 Litre. I know, because I have one!!!!!!!

• 
  @orinyellowhair8278Ай бұрын

  @Anslan Mammadov, thank you for your insightful video 😊 Question, what cleaner may I use to spray the inside of the PCV hose with?

• 
  @aslanmammadov2230Ай бұрын

  Parts cleaner from autozone

• 
  @orinyellowhair827817 күн бұрын

  Thank you

• 
  @georgeglovierАй бұрын

  2010 MKS Changing the AMP did not fix mine.

• 
  @jonathancorrigal8447Ай бұрын

  Every time I try to turn mine off the car alarm keeps going off

• 
  @florimbajАй бұрын

  Bmw drivetrain malfunction replace the ground wire...

• 
  @jrunna1982 ай бұрын

  My car won’t start with the foil over the key 🤔

• 
  @MemberLogic2 ай бұрын

  This isn't the 4matic model right?

• 
  @aslanmammadov22302 ай бұрын

  2wd.

• 
  @MemberLogic2 ай бұрын

  @@aslanmammadov2230 Gotcha, thanks for the reply!

• 
  @YouStupidBunny2 ай бұрын

  For anyone who finds this late, search "P41 / NHTSA 14V-438". This will be replaced by the dealers at no charge under a safety recall.

• 
  @mckennaamullins2 ай бұрын

  I have a Lincoln MKS 2011 I tried to hook up, subwoofers in an amp and everything was working fine and then I cut the REM cable to rewire it through a different spot and now my radio and buttons don’t work. The digital screen turns on, but only reads Lincoln THX. does anyone know what that might be. The radio buttons on the steering wheel don’t work but the lower part of the center dash AC unit works perfectly fine. The top half just stopped working after I cut that cable. Does anyone know what that might be?

• 
  @aslanmammadov22302 ай бұрын

  Might be fuse or blown radio unit

• 
  @levialston5182 ай бұрын

  Not to be funny but kinda reminds me of a old saying fix or repair daily.

• 
  @aslanmammadov22302 ай бұрын

  Welcome to Cruze life

• 
  @angelmoreno80002 ай бұрын

  What year and model is this Bmw

• 
  @aslanmammadov22302 ай бұрын

  2011 X3 28i

• 
  @luanamarinalopez51012 ай бұрын

  Can you check out the noise im having with mine? its a 1996 model, the AC stopped working and the water pump started leaking right after... i took it to an autoshop to replace the waterpump and it took them an entire month and cost me a fortune, after the car came back 2 days later it was sounding like this, and i cant tell if it is because of the ac or if they fucked up something with the timing chain

• 
  @aslanmammadov22302 ай бұрын

  Share your video and send me a link let me listen to it

• 
  @luanamarinalopez51012 ай бұрын

  @@aslanmammadov2230 kzread.infoiIMNf1wst4E?si=ZL2YMPr6DouEmrsK

• 
  @williamnace31072 ай бұрын

  This is total bullshit... does not work

• 
  @robertjenkins45742 ай бұрын

  Thank you

• 
  @MrArtVein2 ай бұрын

  Were you throwing any codes?

• 
  @aslanmammadov22302 ай бұрын

  No codes

• 
  @Alexbk0073 ай бұрын

  0:38 whoah id love to one day own one of those 6 cars that have both banks

• 
  @aslanmammadov22302 ай бұрын

  V6 cars?? Am I sensing humor here on my accent ?

• 
  @brucebj3 ай бұрын

  Good morning, i have a 2014 Chevrolet cruze 1.4 t. Randomly shuts off, 50psi fuel pressure, new battery , cables look good, 150psi compression. Any help would be appreciated. Ty

• 
  @aslanmammadov22302 ай бұрын

  ECM, Ignition Switch, Ground cables, Fuel Pump, Wiring etc. do you have any codes ?

• 
  @FranciscoPerez-xz1tu3 ай бұрын

  I did this but I put a High Line cluster from a GTI 2007 into my low line cluster 2009 Jetta. Car turned just fine but display is off. Either cluster is defective , display is defective or it’s a compatibility issue. Thoughts?

• 
  @aslanmammadov22302 ай бұрын

  Compatibility issue

• 
  @aloy.51313 ай бұрын

  Did you also feel anything like the car feeling heavier?

• 
  @theyuviimishra46523 ай бұрын

  Would try on my fusion lets see!

• 
  @bagirmamedov94534 ай бұрын

  Əcəb🎉❤😊

• 
  @ruggedrickrude19464 ай бұрын

  My 2003 LINCOLN TIWN CAR SIGNATURE…..cd player works through speakers I can hear the cd music…radio all I hear is static static static Took shotgun shot at radio now windshield messed up 🤬

• 
  @2400buster4 ай бұрын

  Great Vid! Helped me fix mine as well!!

• 
  @Joe-xj2tb4 ай бұрын

  So can i now do whats on the speedometer instead of being restricted to only 80mph????

• 
  @AsloFacil20244 ай бұрын

  Cambie esa mangera cambie el intake cambie la valvula pcv y tira un silvido que puede ser

• 
  @legacysmith43674 ай бұрын

  Great info. Thank you for the video 🎉

• 
  @crickidie4 ай бұрын

  I CANNOT BELIEVE THAT WORKED OMG YOURE BETTER THAN THE FORD CUSTOMER SERVICE GUY I TALKED TO

• 
  @AmmanH1994 ай бұрын

  Honestly thanks for this video. I’ve been having this issue with my 2008 Nissan on and off for a couple of months. Similar to your car my vehicles front drivers side caliper would lock up when I breaded hard. I’ve recently switched all (3) breaks, rotters, and calipers with the issue happening again within days of the change. Hopefully this works to resolve the issue. My next step would be the break booster (which will be hell)

• 
  @supremeleader59584 ай бұрын

  Can i do the same to the accelerator caliper?

• 
  @aslanmammadov22304 ай бұрын

  Not with accelerator

• 
  @supremeleader59584 ай бұрын

  So what’s the accelerator one responsible for it’s just next to the brake one

• 
  @coastal2705 ай бұрын

  It not working I tried to many times

• 
  @alonsosalas5 ай бұрын

  Good morning, I have a question. I lost the keys to my Jetta, and I disassembled the closter and the screen broke. I looked for another used one of the same model. ? The question would be to program, can I do it with the new one? Or do I have to change the EPROM from mine to the new one I brought? Or does it just read the pin again and it will be programmed?

• 
  @sanelsilahic95255 ай бұрын

  Never fails with General Motors

• 
  @elapik19735 ай бұрын

  It is possible that this does work in a 2010 & 2011? However it does not in our 2012...I have to have a new key cut and programed for it!

• 
  @elapik19735 ай бұрын

  This will not work if you don't have the Admin key! Don't get me wrong , if you wrap the non admin key with alum foil it will also do what he shows and cause that light to flash, but... in this video, he is using the admin key, which also can be locked out ....however, if you are using the other key, it WILL NOT, give you the "press reset to create my key" setting!

• 
  @yasseryousuf22444 ай бұрын

  So whats the solution for this?

• 
  @goodfella14855 ай бұрын

  So is this the reason why my f10 520d shakes a lot when i start the car after a time it doesn’t shake anymore tho

• 
  @ivanleon17765 ай бұрын

  If there's no code but you still a rough or slightly weird idle you have to clean the throttle body, my car would idle up and down and a couple of times it'll idle off at a red light or while parked. Clean all of your air flow sensors and the throttle body and many problems will go away, I a actually removed my throttle body of the car for a deep clean. The same spray you use to clean the sensors works for cleaning the throttle body or anything air flow related, just make sure you let it dry for about 10 minutes before turning the engine on. Hope this helps guys 👍😃

• 
  @neilhadner86855 ай бұрын

  Ibe gotan 09 rabbit that instrument cluster went dead. The car starts abd drives good i cant see how fast or rpm, fuel or temp. Would the repair did work on mine. Any help before i get one programed??

• 
  @user-wg6ek5mo6u6 ай бұрын

  Hey you hot the nail on the head bc my car looks just like that navy Chevy Cruze Lt.

• 
  @robertpriddy18086 ай бұрын

  When I got my Chevy Cruze about 9 months ago I had all sorts of issues I fixed. So my question is. On start up is it normal for my RPMs to go above 1000rpm then after about a min of warmup my RPMs drop just below 1000rpm? I ask because I have never had a car do that.

• 
  @aslanmammadov22306 ай бұрын

  It happens on most of the cars

• 
  @TylerMaxton6 ай бұрын

  Where's the turbo? My turbo is on the front. Your cover looks weird to. That had a diesel tag on the back buy i dont think its a diesel.

• 
  @aslanmammadov22306 ай бұрын

  It’s 1.4L turbo gasoline. Turbo is right in front of the engine. That hose attaches to part of the turbo

• 
  @user-rf8ep3li7i6 ай бұрын

  It's weird they bury the turbo like that. Mine is very visible right at the top front. Why does it have a diesel badge that's the real question because mines a 2.0td.

• 
  @rulebraking6 ай бұрын

  Awesome- thx much for posting- saved me from the hassle of having to lower the subframe n remove the exhaust!! For some reason you are the only video I’ve found to cover replacing the mounts for a 2014 E350 and it took me a bunch of searches!! Again much appreciated - best

• 
  @aslanmammadov22306 ай бұрын

  When I searched everyone said exhaust has to come out and frame needs to be lowered. I had to prove them wrong lol

• 
  @danasiawalton13266 ай бұрын

  It’s not working for my 2010 Ford Flex